• Journal of Ocean Engineering and Technology
• /
• v.23 no.1
• /
• pp.152-157
• /
• 2009

In designing and manufacturing a submarine, an expensive real mock up is usually built as a reference because of the spatial constraints of a submarine. This paper presents an integrated and automated design process for a submarine that uses a digital mock up. Various equipment libraries are built for feature based design. Using the developed digital mock up, this paper shows various ways to verify the design, including a space analysis to check for any interference between pieces of equipment and the hull and an ergonomic analysis using lifelike dummies to examine the work space and operability. As a part of the integrated design system, a design automation system was also developed to generate surface point data for the outer hull, pressure hull, casing, and sail. The whole process was applied to the design of a submarine for verification.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.5 s.66
• /
• pp.78-82
• /
• 2005

The motion response results of a submerged submarine section in waves are presented. The numerical method is based on Cauchy's integral and 3 degrees-of-freedom motions of submarine sections are calculated in two dimensions, in regular waves. The fully nonlinear free surface and body boundary conditions are applied to the present problem, and the viscous effects on the submarine are modeled by Morison's formulas. The motions of submarine sections in beam sea are directly simulated and the effects of wave frequency, snorkel depth, and bridge are discussed.

• Journal of the Korea Convergence Society
• /
• v.6 no.6
• /
• pp.177-183
• /
• 2015

The image information acquired by a model submarine is transmitted through the repeater. The control signal of a position for submarine and its speed is also controlled by the repeater. Shooting images of underwater circumstances are transmitted to the repeater where the received signal controls a position and speed of underwater submarine. This repeater is combined by a buoy that is floating on the surface to relay the signal of image as well as control between a control unit and a submarine whereas the repeater communicates wirelessly with a control unit. Due to wire communication between the repeater and the submarine, the underwater exploration can be smoothly carried out without a risk of loss of a model submarine. Also, connecting to the repeater and control unit wirelessly makes it possible to conduct easily the underwater exploration. The convergence technology that combines a wireless communication and a control as well as a model submarine is designed.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.1 s.74
• /
• pp.31-39
• /
• 2007

Recently, the nonlinear dynamic responses among waves, submarine pipeline and seabed have become a target of analyses for marine geotechnical and coastal engineers. Specifically, the velocity field around the submarine pipeline and the wave-induced responses of soil, such as stress and strain inside seabed, have been recognized as dominant factors in discussing the stability of submarine pipeline. The aim of this paper is to investigate nonlinear dynamic responses of soil in seabed, around submarine pipeline, under wave loading. In order to examine wave-induced soil responses, first, the calculation is conducted in the whole domain, including wave field and the seabed, using the VOF-FDM method. Then, velocities and pressures, which are obtained on the boundary between the wave field and the seabed, are used as the boundary condition to compute the wave-induced stress and strain inside seabed, using the poro-elastic FEM model, which is based on the approximation of the Biot's equations. Based on the numerical results, the characteristics of wave-induced soil responses around submarine pipeline are investigated, in detail, inrelation to relative separate distance of the submarine pipeline from seabed. Also, the velocity field around the submarine pipeline is discussed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.329-329
• /
• 2017

In this study attempted to evaluate the stability of the protection methods by examining hydraulic characteristics of the area around the point in which marine cable protector is installed such as surf zone occurrence point of shore-end submarine cables suitable for coastal marine environmental conditions, flow rate t the tope of the protector and maximum wave height, and to provide basic data for the selection of the optimal protection method. In performing hydraulic model experiments, the topography of submarine cable installation location was reproduced in 2-D sectional channel, and models appropriate for experimental scale and similitude law were produced and installed for each condition of submarine cables and protectors. Since the topography and submarine cable protectors were reproduced and installed in 2-D sectional channel, the exact reproduction of surf and transformation in shallow water zone was possible, and thus the physical properties could be clearly analyzed. For stability review, an experiment to examine the stability was conducted using a wave maker with 50-year frequency design waves as target, and wave height and cycles were applied based on the approximate lowest low water level(Approx. L.L.W), which is the most dangerous in submarine cable protection methods. As for experimental time, typhoon passing time in summer (about 3 hours) was applied, and wave patterns and deviation ratio of the submarine cable protector were investigated after making irregular waves corresponding to design waves. In addition, current meter and wave height meter were installed at the installation location of the submarine cable protector, and the flow rates and wave height at the top of the protector were measured and analyzed to review hydraulic properties.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.2
• /
• pp.116-123
• /
• 2012

This study aims to analyze the strength of pressure hull of a small submarine. The pressure hull of a submarine has to withstand very large differential pressure between hydrostatic pressure in submarine operating depth and atmospheric pressure in inner space of a submarine. To do that, the pressure hull is generally ring-stiffened cylindrical shell under external pressure. In this situation, there are some foreseeable failure modes of the pressure hull such as shell yielding, axisymmetric shell buckling, asymmetric shell buckling, overall buckling and buckling of end closure. We calculated collapse pressures of these failure modes with approximation and empirical formulas. And, to analyze critical buckling pressure, we performed eigenvalue analysis with finite element method tools.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.4
• /
• pp.572-578
• /
• 2011

In this paper, the result of study on the effectiveness of anti-submarine defense plan according to the disposition of surface ships has been proposed. The surface ship carries a hull mounted sonar(HMS) as a underwater sensor and a torpedo acoustic counter measure(TACM) as a soft-kill weapon against torpedo attacks from the enemy. Nowadays these underwater systems have been combined into a integrated anti-submarine warfare combat system. And in the real anti-submarine operation environment, several surface ships cooperate for executing ASW plans. Considering these ASW systems and the ASW environment, the models of underwater systems mounted on an surface ship and the a general model of anti-submarine defense plan are proposed. And we designed a scenario for conducting simulations to evaluate the ASW plan according to the variation of the range and the relative angle between surface ships and a capital ship. The simulation results show the effectiveness of ASW plan depends on the formation of surface ships and a capital ship.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.6
• /
• pp.570-575
• /
• 2023

Demand and necessity for eco-friendly offshore wind farms have been increasing. Research on submarine cables is constantly being considered for a reliable and stable power transmission. This study aimed to evaluate the thermal aging characteristic of submarine cables inside the J-tube of offshore wind farms. In this study, a submarine cable was set in three sections: The first is the part exposed to the air above the sea level at high temperature. The second is the section exposed to repeated temperature fluctuation as the sea level rises and falls. The third is the part submerged at low temperature below the sea level. Aged samples were tested by using the method of electrical evaluation to obtain insulation characteristics. The experimental results show that the dielectric breakdown of the sample with temperature fluctuation was 7% lower than the sample with a constant temperature; thereby, demonstrating that the section where the temperature fluctuation occurred in the submarine cables was weaker than the other. The sections of submarine cable with temperature fluctuations are believed as a weak point during operation; therefore, this part should be monitored preferentially.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.539-544
• /
• 2004

In this study, locational information data acquisited by using the side scan sonar which is more precise than traditional submarine terrain' survey equipment. And the result of exploration through the object area(the East sea), accurate submarine terrain could be deciphered by sounded image. Also, in the future, side scan sonar's application will be maximized for the submarine terrain's sediment investigation to design or construction of ocean facilities.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.404-409
• /
• 2012

In order to detect and track target, submarine gather the target information(bearing, range, frequency and so on) with using multiple sensors. And submarine can estimate target states with target information. In this paper, we suggest the target motion analysis(TMA) filter architecture of submarine and the proposed TMA filter architecture is tested by a series of computer simulation runs and the results are analyzed and verified.