• 인터넷정보학회논문지
• /
• 제24권1호
• /
• pp.9-15
• /
• 2023

SPA(Single-Page Application)는 RESTful API와 통신을 위해 데이터의 변환을 필요로 한다. BFF(Backend for Frontend) 패턴은 이 변환을 서버에서 처리하고 있으나 통신 횟수를 증가시키고 개발과 배포를 어렵게 하는 문제가 있다. 본 연구에서는 SPA의 ViewModel과 RESTful API의 모델을 SPA에서 직접 매핑하는 아키텍처를 제안한다. 제안한 아키텍처는 RESTful API의 문서 모델인 OpenAPI 사양을 이용하여 RESTful API 모델과 ViewModel 간의 매핑 모델을 자동 생성한다. SPA의 통신 컴포넌트는 생성된 모델을 이용하여 RESTful API 데이터와 ViewModel을 자동 변환한다. 사례 연구를 통해 기존 BFF 방식과 비교한 결과 제안한 아키텍처는 BFF에 비해 높은 개발 생산성을 보였고 부하테스트 결과 BFF에 비해 약 6 %이상 낮은 서버 CPU 점유율을 기록하였다.

• Computers and Concrete
• /
• 제34권3호
• /
• pp.307-328
• /
• 2024

The concrete damage plasticity (CDP) model is widely used to simulate concrete behaviour using either implicit or explicit analysis methods. To effectively execute the models and resolve convergence issues in implicit analysis, activating the viscosity parameter of this material model is a common practice. Despite the frequent application of implicit analysis to analyse concrete structures with the CDP model, the viscosity parameter significantly varies among available models and lacks consistency. The adjustment of the viscosity parameter at the element/structural level disregards its indirect impact on the material. Therefore, the accuracy of the numerical model is confined to the validated range and might not hold true for other values, often explored in parametric studies subsequent to validations. To address these challenges and develop a unified numerical model for varied conditions, a quasi-static analysis using the explicit solver was conducted in this study. Fifteen thick flat plates tested under load control with different geometries and different eccentric loads were considered to verify the accuracy of the model. The study first investigated various concrete material behaviours under compression and tension as well as the concrete tensile strength to identify the most reliable models from previous methodologies. The study compared the results using both implicit and explicit analysis. It was found that, in implicit analysis, the viscosity parameter should be as low as 0.0001 to avoid affecting material properties. However, at the structural level, the optimum value may need adjustment between 0.00001 to 0.0001 with changing geometries and loading type. This observation raises concerns about further parametric study if the specific value of the viscosity parameter is used. Additionally, activating the viscosity parameter in load control simulations confirmed its inability to capture the peak load. Conversely, the unified explicit model accurately simulated the behaviour of the test specimens under varying geometries, load eccentricities, and column sizes. This study recommends restricting implicit solutions to the viscosity values proposed in this research. Alternatively, for highly nonlinear problems under load control simulation, explicit analysis stands as an effective approach, ensuring unified parameters across a wide range of applications without convergence problems.

• 한국사회복지학
• /
• 제69권1호
• /
• pp.255-281
• /
• 2017

이 연구는 발달장애인의 자립을 위한 개념적 모델로서 지원생활모델을 소개하고, 이의 한국 장애인복지에의 적용가능성을 탐색하고 함의를 도출하고자 한 것이다. 이를 위해 지원생활모델의 개념 및 그 의미, 원칙을 살펴보고, 이 모델이 먼저 도입된 서구 서비스 현장에서 보고된 지원생활에 대한 잘못된 인식을 함께 다룸으로써 이에 대한 정확한 이해를 돕고자 하였다. 또한 지원생활모델이 발달장애인 자립에 적용되는 실제를 이해하기 위하여 영국의 지원생활네트워크와 호주의 지원생활유형을 살펴보았다. 이와 함께 영국과 호주에서 개발 사용되고 있는 지원생활 매뉴얼을 살펴보고, 이에 나타난 지원생활 실천의 핵심요소를 도출하였다. 이를 통해 이 연구는 발달장애인의 자립에 대한 개념적 모델로서 지원생활모델의 중요성을 제시하였으며, 제도적, 기관, 이용자 차원에서의 향후 적용방안을 논의하고 있다. 이 연구는 발달장애인의 자립에 대한 가능성과 함의를 논의한 연구로서, 향후 관련분야의 기초자료로서 기여할 것이다.

• 복식
• /
• 제50권2호
• /
• pp.97-109
• /
• 2000

The purpose of this study is to apply 3D computer graphics in fashion design as a creative medium and it attempts to fine out what advantages 3D technique can offer to fashion design. For this purpose, this study, first, tries to develop a 3D digital model in which designer can select design, color , pattern and fabric palette whatever necessary . This study uses of the software named 'Poser of Fractal Design' and the and the 3D digital model comprises four stages ; body modeling, item design (item coordination), color design (color coordination), pattern and fabric design (pattern and fabric coordination). Secondly, this study seeks to accumulate a data base which was produced in the course of case studies, which have applied 3D digital model to design. The outcome of the case studies shows that 3D digital model can enhance designing in the following four aspects. ⅰ) It can give more freedom to designer to try various ideas, revise and modify them, It can also produce random generation. Through this process, the designer test various input and output without damage on fabric after revision and alteration. ⅱ) It can help designers to enhance their accuracy. Since fault in the design developed by the 3D digital model can be detected in advance, designers can make correlation before actual work begins. In the end, designers can express their ideas and intention accurately as well as freely. ⅲ) Since design developed by the 3D digital model can be shared on screen by various actors in the course of priduction such designers , merchandisers, and supervisors, it can help communication between and cut the time of feedback.ⅳ) By using the 3D digital model, designers can work from the begining with awareness of actual outcome their design, since the 3D digital model provide animation, which helps designers to envisage visual changes as they apply various items, colors, pattern and fabrics.

• 한국지반신소재학회논문집
• /
• 제12권1호
• /
• pp.11-19
• /
• 2013

조립재료는 댐, 철도, 교량 구조물 건설시 제체, 성토재, 뒤채움재, 배수재 등으로 널리 사용되고 있으며, 이러한 구조물의 거동해석을 위한 수치해석을 위해 구성모델에 대한 연구가 다양하게 진행되어 왔다. 본 논문에서는 조립재료의 거동을 예측하기 위해 개발된 구성모델에 대한 변수 연구를 수행하였다. 구성모델은 한계상태이론에 근간한 bounding surface 모델로서 한 세트의 모델 정수를 활용하여 배수 조건, 구속압, 간극비에 상관없이 조립재료의 거동을 구현할 수 있는 장점을 지니고 있다. 구성모델은 탄성 파라미터, 한계상태 파라미터, 모델 고유파라미터를 활용하여 재료의 거동을 분석하며, 본 연구에서는 모델 고유 파라미터에 대한 변수 연구를 수행하였다. 변수 연구를 통해 구성모델이 조립재료의 가장 큰 특징인 비관계유통법칙(non-associative flow rule)에 따른 체적팽창 및 응력경로 변화에 따른 이동경화 현상을 적절히 모사할 수 있음을 파악하였다.

• 정보화연구
• /
• 제9권1호
• /
• pp.95-110
• /
• 2012

비즈니스 모델의 시대가 도래하고 있다. 최근에 각광을 받고 있는 애플, 페이스북 등 IT 기업들은 혁신적인 제품 보다는 혁신적인 비즈니스 모델로 성공을 거두고 있다. 글로벌 IT 기업들은 새로운 비즈니스 모델로 높은 성과와 함께 경쟁력을 유지하고 있으나 국내 IT 기업들에게서 이러한 모습은 크게 찾아 볼 수 없다. 국내 IT 기업의 발전을 위해서는 이제 새로운 비즈니스 모델에 대한 연구가 필요하다. 본 연구는 비즈니스 모델의 구성요소들을 파악하고 비즈니스 모델 개편을 위한 분석적인 프레임워크를 제시한다. 그리고 사례 연구를 통해 비즈니스 모델 측면에서 국내 IT 기업들과 해외 기업들을 비교 분석함으로써 국내 기업들의 비즈니스 모델의 특징과 앞으로의 과제를 제시한다. 본 연구의 결과는 국내 비즈니스 모델에 대한 연구를 본격화, 체계화하고 국내 기업들이 향후 효과적인 비즈니스 모델을 갖추어 글로벌한 경쟁에서 생존하는데 일조할 것으로 기대한다.

• 품질경영학회지
• /
• 제50권2호
• /
• pp.183-197
• /
• 2022

Purpose: The purpose of this study is to develop a quantitative evaluation model for the defense quality management system and suggest institutionalization plans. To this end, another existing evaluation model was reviewed and analyzed to develop a quantitative evaluation model applicable to military institutions. Methods: In this study, in order to establish a DQMS quantitative evaluation model, a military product quality level survey model and a defense quality model operated in the defense field were analyzed. In addition, evaluation models and indicators were analyzed by investigating evaluation models operated by other institutions and private sectors. Results: As a result of the study, the total score of the DQMS model was 1,000 points, 600 points for maturity level indicators and 400 points for operation performance indicators, and the evaluation items consisted of 7 major categories and 25 middle categories. The maturity level index 600 points are 70 points for organizational situation, 60 points for leadership, 40 points for planning, 100 points for support, 180 points for operation, 90 points for performance evaluation, and 60 points for improvement. Conclusion: It will be easy to quantify and evaluate the operating level of DQMS certified companies through the application of the DQMS quantitative evaluation model and evaluation criteria presented in this study. As a result, it will be possible to grasp the level of quality management system and the areas of improvement, and the overall level of improvement can be expected by inducing voluntary improvement activities through sharing of best practices and identifying improvement cases.

• Advances in environmental research
• /
• 제4권4호
• /
• pp.211-218
• /
• 2015

Traffic noise estimation models are useful in evaluation of the noise pollution in current circumstances. They are helpful tools for design and planning new roads and highways. Measurement of average traffic noise level is possible when traffic speed and volume are known. The objective of this study was to devise a model for prediction of highway traffic noise levels based on current traffic variables in Iran. The design of this model was to take the impact of traffic congestion into consideration and to be field tested. This study is a library research augmented by field study conducted on Saeedi Highway located south west of Tehran. The period for the field study lasted 5 days from 7-12 February, 2013. This study examined liner and non-liner methods in formulation of its model. Liner method without a fixed coefficient was the best fit for the intended model. The proposed model can serve as a decision making tool to estimate the impact of key influential factors on sound pressure levels in urban areas in Iran.

• 가족자원경영과 정책
• /
• 제5권1호
• /
• pp.123-140
• /
• 2001

This paper proposes empirical research areas and a curriculum model that outlines the core concepts of major research topic and educational programs of family business. The purpose of this study was two fold: First, to develop the conceptual and empirical research model of family business. For this purpose, this study examined five conceptual issues - ethical, theoretical, management, historical, environmental - in the development of family business research areas. Based on these five conceptual issues, this study developed an empirical research model of family business. Second was to develop the curriculum model of family business at the university level. This curriculum was developed in terms on the family system. business system, and ownership system of family business. This study will be useful in developing more professional curriculum and educational programs to help educator and professional advisors assist family businesses.

• 한국농촌건축학회논문집
• /
• 제13권3호
• /
• pp.53-60
• /
• 2011

The purpose of this study was to propose the urban regeneration project model that reinforce public functions and contribute effectively to urban development. The results of this study were as follows. First, this study developed objective 22 different types of evaluation indexes. The indexes allows to figure out the necessities, business value and conditions of certain urban regeneration project. Second, the urban is divided to 6 types by characteristics of functionality and location. So, each regeneration project model can be applied to meet the condition of the urban.. Third, this study proposed 5 types of urban regeneration project model to fulfil roles of public and encourage the urban development. The urban regeneration project model is supposed to perform the evaluation of urban condition using the index, typological analysis under the law and scheme and analysis of function and urban location.