• 대한화학회지
• /
• 제46권3호
• /
• pp.229-232
• /
• 2002

폴리아닐린에 전자주게기(-CH3)를 치환하여 전자효과(electronic effect) 와 입체장애효과(steric effect)를 확인하였다.1 폴리아닐린 유도체 폴리톨루이딘(POT)의 산화상태를 변화시키면서 ITO/POT/Al 구조의 유기발광소자를 제작하여 PL, I- V 특성 및 전기발광 특성을 확인하였다. 발광소자의 구동전압은 9∼14 V 이었다.

• Journal of Welding and Joining
• /
• 제8권2호
• /
• pp.58-69
• /
• 1990

In conventional arc welding, position error of the weld torch with respect to the weld seam and variation of groove dimension are induced by inaccurate fitup and fixturing. In this study, a vision system has been developed to recognize and compensate the position error and dimensional inaccuracy. The system uses a structured laser light illuminated on the weld groove and perceived by a C.C.D camera. A new algorithm to detect the edge of the reflected laser light is introduced for real time processing. The developed system was applied to arbitarary weld paths with various types of joint in arc welding process. The experimental results show that the proposed system can detect the weld groove parameters within good accuracy and yield good tracking performance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.554-557
• /
• 2001

Indium Tin Oxide(ITO) thin films have been fabricated by the dc magnetron sputtering technique with a target of a mixture $In_{2}O_{3}$(90mol%) and $SnO_{2}$(10mol%). We prepared ITO thin films with substrate temperature 200 to $400^{\circ}C$ and annealing temperature 200 to $500^{\circ}C$. Good polycrystalline-structured ITO films with a low electrical resistivity of $3.4{\times}10^{-4}\Omega{\cdot}cm$ have been obtained. The visible light transmittance of all obtained films was over 80 %.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.554-557
• /
• 2001

Indium Tin Oxide(ITO) thin films have been fabricated by the dc magnetron sputtering technique with a target of a mixture In$_2$O$_3$(90mo1%) and SnO$_2$(10mo1%). We prepared ITO thin films with substrate temperature 200 to 400$^{\circ}C$ and annealing temperature 200 to 500$^{\circ}C$ food polycrystalline-structured ITO films with a low electrical resistivity of 3.4${\times}$10$\^$-4/ Ω$.$cm have been obtained. The visible light transmittance of all obtained films was over 80 %.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권9호
• /
• pp.4541-4554
• /
• 2019

This paper proposes a planar projection DV-hop location algorithm (PTCDV-hop) based on the LED semi-angle at half power (SAHP, which accounts for LED SAHP characteristics in visible light communication (VLC)) and uses the DV-hop algorithm for range-free localization. Distances between source nodes and nodes positioned in three-dimensional indoor space are projected onto a two-dimensional plane to reduce complexity. Circles are structured by assigning source nodes (projected onto the horizontal plane of the assigned nodes) to be centers and the projection distances as radii. The proposed PTCDV-hop algorithm then determines the position of node location coordinates using the trilateral-weighted-centroid algorithm. Simulation results show localization errors of the proposed algorithm are on the order of magnitude of a millimeter when three sources are used. The PTCDV-hop algorithm has higher positioning accuracy and stronger dominance than the traditional DV-hop algorithm.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.226-226
• /
• 2013

Si is a dominant solar material, which is the second most abundant element in the earth giving a benefit in the aspect in cost with low toxicity. However, the inherent limit of Si has an indirect band gap of 1.1 eV resulting in the limited optical absorption. Therefore, a critical issue has been raised to increase the utilization of the incident light into the Si absorber. The enhancement of light absorption is a crucial to improve the performances and thus relieves the cost burden of Si photovoltaics. For the optical aspect, an efficient design of a front surface, where the incident light comes in, has been intensively investigated to improve the performance of photon absorption. Lambertian light trapping can be attained when the light active surface is ideally rough to increase the optical length by about 50 compared to a planar substrate. This suggests that an efficient design may reduce thickness of the Si absorber from the conventional 100~300 ${\mu}m$ to less than 3 ${\mu}m$. Theoretically, a hole-array structure satisfies an equivalent efficiency of c-Si with only one-twelfth mass and one-sixth thickness. Various approaches have been applied to improve the incident light utilization in a Si absorber using textured structures, periodic gratings, photonic crystals, and nanorod arrays. We have designed hole and pillar structured Si absorbers. Four-different Si absorbers have been simultaneously fabricated on an identical Si wafer with hole arrays or pillar arrays at a fixed depth of 2 ${\mu}m$. We have found that the significant enhanced solar cell performances both for the hole arrayed and pillar arrayed Si absorbers compared to that of a planar Si wafer resulting from the effective improvement in the quantum efficiencies.

• 전기전자학회논문지
• /
• 제25권2호
• /
• pp.322-329
• /
• 2021

본 연구에서는 열처리 후 Island 표면 구조를 가지는 고분자 Poly(vinylidenefluoride-co-trifluoroethylene) [P(VDF-TrFE)]를 사용하여 유기 발광 다이오드의 광추출 효율을 향상시키기 위한 방법을 제시하였다. Island 구조의 P(VDF-TrFE) 표면 위에 임프린트한 polydimethylsiloxane (PDMS)는 Spike 구조를 띄고 이를 통해 전류 및 외부양자 효율을 약 20%을 향상시켰다. 제작된 필름은 8.2의 낮은 Haze특성을 보이며, 93.4% 우수한 투과도 특성으로 인해 Pixel blur 없이 광효율을 향상시킬 수 있음을 확인하였다.

• 대한화학회지
• /
• 제45권2호
• /
• pp.156-161
• /
• 2001

여러 가지 산화상태의 폴리아닐린을 화학적으로 합성하여 FT-IR, UV-Vis, GPC, TG-DTA로 측성 분석하였다. ITO 기관위에 다양한 산화상태의 LEB-PAN/NMP 용액으로 스핀코팅하고, AI 전극을 진공증착하여 단일층 발광다이오드를 제작하고 I-V 특성과 EL 스팩트럼에서 완전환원형인 LEB 함량이 증가할수록 ${\pi}$-${\pi}$* 전이의 장파장이동과 분자 엑시톤 전이 세기가 감소하고 PL과 EL 세기가 증가하는 것을 확인하였다. ITO/LEB/AI 구조의 LED에서 작동 전압은 5V 이었다. 백색광은 단지 폴리아닐린의 환원형 구조에서만 발광하는 것을 확인하였다.

• 한국광학회지
• /
• 제32권4호
• /
• pp.172-179
• /
• 2021

높은 종횡비를 가지는 미세 패턴 시료의 하부층 구조결함에 대해 높은 민감도를 가지는 광학적 임계치수 측정 장비로서 준 수직입사 타원계를 제안한다. 이 준 수직입사 타원계에서는 입사광은 편광자와 위상지연자를 순차적으로 통과하며 반사광은 이들을 역순으로 통과한다. 하나의 편광자와 하나의 위상지연자를 입사광과 반사광이 공유하며 편광자와 위상지연자의 여러 방위각 조합에서 측정한 빛의 세기로부터 타원상수를 결정하는 이 준 수직입사 타원계의 측정원리를 검토하고 최적의 타원상수 측정방법을 제시한다.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.487-492
• /
• 2009

A large-scaled research project titled "Intelligent Excavating System (IES)" sponsored by Korean government has launched in 2006. An issue of real-time 3D terrain modeling has become a crucial point for successful implementation of IES due to many application limitations of state-of-the-art techniques developed in various high-technology fields. Many feasible technologies such as laser scanning, structured lighting and so on were widely reviewed by professionals and researchers for one year. Various efforts such as literature reviews, interviews, and indoor experiments make us select a structural light technique and stereo vision technique as appropriate techniques for accomplishment of real-time 3D terrain modeling. It, however, revealed that off-the-shelf products of structural light and stereo-vision technique had many technical problems which should be resolved for practical applications in IES. This study introduces diverse methods modifying off-the-shelf package of the structural light method, one of feasible techniques and eventually allowing this technique to be successfully utilized for achieving fundamental research goals. This study also presents many efforts to resolve practical difficulties of this technique considering basic characteristics of excavating operations and particular environment of construction sites. Findings showed in this study would be beneficial for other researchers to conduct new researches for application of vision techniques to construction fields by provision of detail issues about practical application and diverse practical methods as solutions overcoming these issues.