• 제목/요약/키워드: structure tracking

검색결과 760건 처리시간 0.034초

로봇 메니플레이터의 혼합 추적 제어를 위한 강인 가변구조제어기 (A Robust Variable Structure Controller for the Mixed Tracking Control of Robot Manipulators)

  • 이정훈
    • 전기학회논문지
    • /
    • 제59권10호
    • /
    • pp.1908-1913
    • /
    • 2010
  • In this paper, a robust variable structure tracking controller is designed for the mixed tracking control of highly nonlinear rigid robot manipulators for the first time. The mixed control problem under consideration is extended from the basic tracking problem, with the different initial condition of both the planned trajectory and link of robots. This control problem in robotics is not addressed to until now. The tracking accuracy to the sliding trajectory after reaching is analyzed. The stability of the closed loop system is investigated in detail in Theorem 2. The results of Theorem 2 provide the stable condition for control gains. Combing the results of Theorem 1 and Theorem 2 gives rise to possibility of designing the improved variable structure tracking controller to guarantee the tracking error from the determined sliding trajectory within the prescribed accuracy after reaching. The usefulness of the algorithm has been demonstrated through simulation studies on the mixed tracking control of a two.link robot under parameter uncertainties and payload variations.

Receiver Design for Satellite Navigation Signals using the Tiered Differential Polyphase Code

  • Jo, Gwang Hee;Noh, Jae Hee;Lim, Deok Won;Son, Seok Bo;Hwang, Dong-Hwan;Lee, Sang Jeong
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제10권4호
    • /
    • pp.307-313
    • /
    • 2021
  • Modernized GNSS signal structures tend to use tiered codes, and all GNSSs use binary codes as secondary codes. However, recently, signals using polyphase codes such as Zadoff-Chu sequence have been proposed, and are expected to be utilized in GNSS. For example, there is Tiered Differential Polyphase Code (TDPC) using polyphase code as secondary code. In TDPC, the phase of secondary code changes every one period of the primary code and a time-variant error is added to the carrier tracking error, so carrier tracking ambiguity exists until the secondary code phase is found. Since the carrier tracking ambiguity cannot be solved using the general GNSS receiver architecture, a new receiver architecture is required. Therefore, in this paper, we describe the carrier tracking ambiguity and its cause in signal tracking, and propose a receiver structure that can solve it. In order to prove the proposed receiver structure, we provide three signal tracking results. The first is the differential decoding result (secondary code sync) using the general GNSS receiver structure and the proposed receiver structure. The second is the IQ diagram before and after multiplying the secondary code demodulation when carrier tracking ambiguity is solved using the proposed receiver structure. The third is the carrier tracking result of the legacy GPS (L1 C/A) signal and the signal using TDPC.

차량의 동적 상호작용에 관한 이론연구 및 윤하중 실험 (An Analytical and Experimental Wheel Tracking Study on Dynamic Interaction of Vehicle)

  • 김낙석;박석순
    • 한국재난정보학회 논문집
    • /
    • 제2권1호
    • /
    • pp.39-52
    • /
    • 2006
  • In this paper, an analytical and experimental study was performed in order to determine the effects of interaction between vehicle and structure. Results presented in the paper show that analytical method including moving load effect can investigate the trend of structural response due to dynamic interaction between vehicle and structure. The wheel tracking machine fitted with 2-axle test vehicle can demonstrate more accurate dynamic interaction between vehicle and structure than the wheel tracking machine fitted without 2-axle test vehicle.

  • PDF

Design of Continuous Variable Structure Tracking Controller With Prescribed Performance for Brushless Direct Drive Drive Servo Motor

  • Lee, Jung-Hoon
    • Journal of Electrical Engineering and information Science
    • /
    • 제3권1호
    • /
    • pp.58-66
    • /
    • 1998
  • A continuous, accurate, and robust variable structure tracking controller(CVSTC) is designed for brushless direct drive servo motors(BLDDSM). Although conventional variable structure controls can give the desired tracking performances, there exists an inevitable chattering problems in control input which is undesirable for direct drive systems. With the presented algorithm, not only the chattering problems are removed by using the efficient compensation of the disturbance observer, but also the prescribed tracking trajectory can be obtained using the sliding dynamics when an initial of the desired trajcetory is different from that of a BLDDSM. The design of the sliding mode tracking controller for the prescribed, accurate, and robust tracking performance without the chattering problem is given based on the results of the detailed stability analysis. The usefulness of the suggested algorithm is demonstrated through the computer simulation for a BLDDSM under load variations.

  • PDF

시각센서를 이용한 용접선 자동추적시스템의 개발에 관한 연구 (A Study on Development of Automatic Weld-Seam Tracking System using Vision Sensor)

  • 배강열;이지형
    • Journal of Welding and Joining
    • /
    • 제14권4호
    • /
    • pp.79-88
    • /
    • 1996
  • For improvement in productivity and weld quality, weld seam tracking and welding parameter control are very essential in the welding of a structure which can not be cxactly fit-up due to mismatch, discontinous gap, deflection, etc.. In this study, an automatic weld seam tracking system is developed for I-butt joint structure, and the system consists of XYZ working table, vision sensor and user interface program. In the developed vision sensor system, an image projection algorithm for weld-line detection and an adaptive current control algorithm for gap variation were implemented. The user interface program developed in this study by basing on the objct oriented concept could provide very convenient way to utilize the tracking system with the pull-down menu driven structure. The developed system showed a good seam tracking and weld quality control capability corresponding to deflected weld lines and gap variations.

  • PDF

무인기용 Ku 대역 위성추적 시스템의 동축구조 도파관 고차모드 커플러에 대한 연구 (A Study on Coaxial-Structure Waveguide High-Order Mode Coupler of Ku-Band satellite tracking system for UAV)

  • 이재문;임재성;가득현
    • 한국인터넷방송통신학회논문지
    • /
    • 제16권2호
    • /
    • pp.93-99
    • /
    • 2016
  • 본 논문은 무인기용 Ku 대역 위성추적 안테나 시스템의 다중모드 모노펄스 추적 시스템을 위한 소형구조 도파관 고차모드 커플러를 설계, 제작 및 성능시험을 수행하였다. 제안된 고차모드 커플러는 이동형 탑재용 위성추적 안테나 시스템에 적용이 가능하도록 장착성을 감안, 동축 구조의 도파관 구조를 이용하였다. 또한 제안된 커플러를 이용하여 출력된 추적 오차 신호의 패턴을 측정하고 설계된 주파수 대역내에서 적정한 추적 오차가 도출됨을 확인하였다. 제안된 커플러 구조는 향후 정밀추적이 요구되는 다중모드 모노펄스 위성추적시스템에 이용될 것으로 기대된다.

메뉴 구조의 평가 방법론으로서 활성화 확산 모델의 타당성 검증: Eye-Tracking 접근 방법 (The Validation of Spreading Activation Model as Evaluation Methodology of Menu Structure: Eye Tracking Approach)

  • 박종순;명노해
    • 대한인간공학회지
    • /
    • 제26권2호
    • /
    • pp.103-112
    • /
    • 2007
  • This study was designed to validate Spreading Activation Theory (SAT) for an evaluation methodology for menu structure through Eye-Tracking approach. When a visual search is on the way, more eye fixations and time are necessary to visually process complex and vague area. From the aspect of recognition, well-designed menu structures were hypothesized to have fewer numbers of fixations and shorter duration because well-designed menu structures reflecting the users' mental model would be well matched with the product's menu structure, resulting in reducing the number of fixations and duration time. The results show that the shorter reaction times for SAT had significantly fewer numbers of fixation and shorter duration time as the hypothesis for this study stated. In conclusion, SAT was proved to be an effective evaluation methodology for menu structure with the eye tracking equipment. In addition, using SAT instead of the real performance experiment would be useful for designing user-centered systems and convenient information structures because SAT was proven to be the theoretical background for design and evaluation of menu structures.

GPIS Tracking 메커니즘의 Mashup 시각구조 웹 (Visual Structure Web of Mashup of the GPIS Tracking Mechanism)

  • 안성은;차홍준
    • 한국정보전자통신기술학회논문지
    • /
    • 제2권2호
    • /
    • pp.79-85
    • /
    • 2009
  • 이 연구는 인터넷 웹에서의 참 뜻을 바로 소통될 수 있도록 가시적인 시각구조에 협력 학습의 형태로 진화 되어질 Mashup Web의 디지털 멀티미디어 표현기술(記述)을 연구하고, 그 설계와 구현을 하였다. 이 기술은 작성된 웹에 접한 사용자의 접속위치정보, 서비스이용 형식(pattern)을 학습 받는 시스템으로 추적(Tracking)되는 기능이 요구자에 새로운 정보로 탐색과 습득할 수 있도록 추론 정보를 선 처리(pre-operation) 받을 수 있게 하는 Mashup 정보표현기술이다.

  • PDF

연속 가변 구조 제어를 이용한 직류 전동기의 추적 제어 (Tracking Control of a DC Servomotor Using a Continuous VSS Control)

  • 이정훈;고종선;이종준;이주장;윤명중
    • 대한전기학회논문지
    • /
    • 제41권6호
    • /
    • pp.607-614
    • /
    • 1992
  • A continuous variable structure system control for a DC servomotor tracking controller is proposed to alleviate the chattering problems. The stability property of the proposed algorithm is analyzed in detail. The prescribed tracking error is guaranteed under load variations based on the stability analysis. Through the comparative simulations between the proposed algorithm and the conventional VSS, the effectiveness of the proposed algorithm is proved.

  • PDF

Ku대역 모노펄스 위성추적을 위한 동축구조 도파관 고차모드 커플러 설계 (Design of a Higher-Order Mode Coupler Using Coaxial-Structure Waveguide for Ku-Band Monopulse Satellite Tracking)

  • 가득현;박도현;송충호;안성준;전찬원;이재문
    • 한국통신학회논문지
    • /
    • 제39C권4호
    • /
    • pp.380-386
    • /
    • 2014
  • 본 논문은 Ku대역 모노펄스 위성추적을 위한 동축구조 도파관 고차모드 커플러를 제안하였다. 제안된 고차모드 커플러는 이동체 탑재용 위성추적시스템에 적용 가능하도록 소형/경량화를 위하여 동축구조의 도파관을 이용하였다. 기본모드 신호 추출을 위해 내측 원형도파관을 이용하였고, 고차모드 신호 추출을 위해 외측 원형도파관에 내어진 4개의 슬롯과 스텝 구조의 직사각형 도파관을 이용하였다. 제안된 고차모드 커플러의 모의실험 결과는 반사손실 및 삽입손실이 약 250 MHz의 대역폭(12.75~13.00 GHz)을 만족하며, 모노펄스 추적에 적용 가능한 기본모드 패턴 및 고차모드 패턴이 만족스럽게 생성된 결과를 확인하였다. 제안된 Ku대역 동축구조 도파관 고차모드 커플러는 고속 정밀추적이 요구되는 모노펄스 위성추적시스템에 이용될 것으로 기대된다.