• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.11a
• /
• pp.459-462
• /
• 2000

In this paper, we propose the initial optimized structure of the Radial Basis Function Network which is more simple in the part of the structure and converges more faster than Neural Network with the analysis method using Time-Frequency Localization. When we construct the hidden node with the Radial Basis Function whose localization is similar with an approximation target function in the plane of the Time and Frequency, we make a good decision of the initial structure having an ability of approximation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.113.1-113
• /
• 2001

The robust position control with the bound function of neural network structure is proposed for uncertain robot manipulators. The neural network structure presents the bound function and does not need the concave property of the bound function, The robust approach is to solve this problem as uncertainties are included in a model and the controller can achieve the desired properties in spite of the imperfect modeling. Simulation is performed to validate this law for four-axis SCARA type robot manipulators.

• Proceedings of the Korean Reliability Society Conference
• /
• 2002.06a
• /
• pp.305-305
• /
• 2002

A continuum structure function is a non-decreasing mapping from the unit hypercube to the unit interval. Within the class of continuum structure functions, new axiomatic characterizations of the Natvig and the Barlow-Wu subclass are obtained.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.502-507
• /
• 2008

An entire composite structure satellite is developing for the first time in Korea. All of the structure is made of CFRP-composite faced aluminum honeycomb sandwich structure. Here the random and sinusoidal spectrum analysis of the satellite was carried out by using the finite element method. The general spectrum analysis was herein performed but also the PSD (power spectrum density) function for random vibration analysis had been transformed into equivalent time domain function and then transient analysis is conducted. The time history of displacement, acceleration, stress and velocity responses with respect to the PSD input has been achieved by the time dependent transient function transformed from frequency PDS function. It enables one to perform dynamic durability analysis and then expect the life time of the composite structure. The composite faced sandwich structure's spectrum analysis of a domestically-developed satellite, STSAT-3, has been discussed in the present study.

• International Journal of Reliability and Applications
• /
• v.8 no.1
• /
• pp.83-94
• /
• 2007

In this paper, we consider a standby redundant structure with a function of switchover processing which may not be not perfect. The switchover processing is governed by a control module whose failure may cause the failure of the whole system. The parameters measuring such an effect of failure of the control module is included in our reliability model. We compute several reliability measures such as reliability function, failure rate, MTBF, mean residual life function, and the steady state availability. We also compare a single unit structure and the redundant structure with regard to those reliability measures. An example is given to illustrate our results.

• Structural Engineering and Mechanics
• /
• v.57 no.2
• /
• pp.281-294
• /
• 2016

The paper is devoted to study a mesh-free analysis method of structural elements of engineering structures based on B-spline Wavelet Basis Function. First, by employing the moving-least square method and the weighted residual method to solve the structural displacement field, the control equations and the stiffness equations are obtained. And then constructs the displacement field of the structure by using the m-order B-spline wavelet basis function as a weight function. In the end, the paper selects the plane beam structure and the structure with opening hole to carry out numerical analysis of deformation and stress. The Finite Element Method calculation results are compared with the results of the method proposed, and the calculation results of the relative error norm is compared with Gauss weight function as weight function. Therefore, the clarification verified the validity and accuracy of the proposed method.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.121-124
• /
• 2007

This article describes a function and structure of access network equipment under BcN environment. Access network until now have constructed separately to offer voice, data service. However, simplifies network structure, function that can do traffic concentration, subscriber certification, individual charging, QoS according to service and routing is required in BcN. In this paper, compare method offering by separate system with existing access network and method that offer integrating function inside system for structure of suitable access network to BcN and search structure of access network equipment for desirable access network of hereafter. Composition of this paper is as following. In Chapter 2, establishment history and structure of access network until present. In Chaprte 3, define suitable requirement and functions to BcN. And compare structure for access net work that is new with present. Last Chapter 4, suggests direction of structure of BcN access network and concludes conclusion.

• Journal of KSNVE
• /
• v.4 no.2
• /
• pp.155-161
• /
• 1994

The dynamic behavior of a complex mechanical structure can be identified by dividing the structure into a series of smaller structure, called sub- structure and by studying the dynamic characteristics of these components. Generally, the dynamic characteristics of mechanical structure are strongly affected by the properties of joint parameters. In this paper, to identify the dynamic characteristics of mechanical structure, and experimental identification method in which directrly measured frequency response function(FRF) is used is considered. The method does not use the procedure of complex matrix calculation but use that of real matrix calculation. To confirm this method, computer simulation is performed by using frequency response function mixed with noise, and the experimental study is performed about the simple structure. The dynamic characteristics of joint parameters and identified more accurately than in using the prcedure of complex matrix calculation.

• Journal of KSNVE
• /
• v.8 no.2
• /
• pp.267-273
• /
• 1998

This study aims at performing sensitivity analysis of piezoelectric smart structure for minimizing radiated noise from the structure, The structure consists of a flat plate on which disk shaped piezoelectric actuator is mounted, and finite element modeling is used for the structure. The finite element modeling uses a combination of three dimensional piezoelectric, flat shell and transition elements so thus it can take into account the coupling effects of the piezoelectric device precisely and it can also reduce the degrees of freedom of the finite element model. Electric potential on the piezoelectric actuator is taken as a design variable and total radiated power of the structure is chosen as an objective function. The objective function can be represented as Rayleigh's integral equation and is a function of normal displacements of the structure. For the convenience of computation, all degrees of freedom of the finite element equation is condensed out except the normal displacements of the structure. To perform the design sensitivity analysis, the derivative of the objective function with respect to the normal displacements is found, and the derivative of the norma displacements with respect to the design variable is calculated from the finite element equation by using so called the adjoint variable method. The analysis results are compared with those of the finite difference method, and shows a good agreement. This sensitivity analysis is faster and more accurate than the finite difference method. Once the sensitivity analysis program is used for gradient-based optimizations, one could achieve a better convergence rate than non-derivative methods for optimal design of piezoelectric smart structures.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.2
• /
• pp.1-9
• /
• 2010

Feistel and SPN are the two main structures in a block cipher. Feistel is a symmetric structure which has the same structure in encryption and decryption, but SPN is not a symmetric structure. In this paper, we propose a SPN which has a symmetric structure in encryption and decryption. The whole operations of proposed algorithm are composed of the even numbers of N rounds where the first half of them, 1 to N/2 round, applies a right function and the last half of them, (N+1)/2 to N round, employs an inverse function. And a symmetry layer is located in between the right function layer and the inverse function layer. In this paper, AES encryption and decryption function are selected for the right function and the inverse function, respectively. The symmetric layer is composed with simple matrix and round key addition. Due to the simplicity of the symmetric SPN structure in hardware implementation, the proposed modified AES is believed to construct a safe and efficient cipher in Smart Card and RFID environments where electronic chips are built in.