• Smart Structures and Systems
• /
• 제24권6호
• /
• pp.709-721
• /
• 2019

This paper investigates the framework of vision-based dense displacement and strain measurement of miter gates with the approach for the quantitative evaluation of the expected performance. The proposed framework consists of the following steps: (i) Estimation of 3D displacement and strain from images before and after deformation (water-fill event), (ii) evaluation of the expected performance of the measurement, and (iii) selection of measurement setting with the highest expected accuracy. The framework first estimates the full-field optical flow between the images before and after water-fill event, and project the flow to the finite element (FE) model to estimate the 3D displacement and strain. Then, the expected displacement/strain estimation accuracy is evaluated at each node/element of the FE model. Finally, methods and measurement settings with the highest expected accuracy are selected to achieve the best results from the field measurement. A physics-based graphics model (PBGM) of miter gates of the Greenup Lock and Dam with the updated texturing step is used to simulate the vision-based measurements in a photo-realistic environment and evaluate the expected performance of different measurement plans (camera properties, camera placement, post-processing algorithms). The framework investigated in this paper can be used to analyze and optimize the performance of the measurement with different camera placement and post-processing steps prior to the field test.

• Earthquakes and Structures
• /
• 제17권5호
• /
• pp.511-519
• /
• 2019

The concrete gravity dam is one of the most important parts of the nation's infrastructure. Besides the benefits, the dam also has some potentially catastrophic disasters related to the life of citizens directly. During the lifetime of service, some degradations in a dam may occur as consequences of operating conditions, environmental aspects and deterioration in materials from natural causes, especially from dynamic loads. Cumulative Absolute Velocity (CAV) plays a key role to assess the operational condition of a structure under seismic hazard. In previous researches, CAV is normally used in Nuclear Power Plant (NPP) fields, but there are no particular criteria or studies that have been made on dam structure. This paper presents a method to calculate the limitation of CAV for the Bohyeonsan Dam in Korea, where the critical Peak Ground Acceleration (PGA) is estimated from twelve sets of selected earthquakes based on High Confidence of Low Probability of Failure (HCLPF). HCLPF point denotes 5% damage probability with 95% confidence level in the fragility curve, and the corresponding PGA expresses the crucial acceleration of this dam. For determining the status of the dam, a 2D finite element model is simulated by ABAQUS. At first, the dam's parameters are optimized by the Minitab tool using the method of Central Composite Design (CCD) for increasing model reliability. Then the Response Surface Methodology (RSM) is used for updating the model and the optimization is implemented from the selected model parameters. Finally, the recorded response of the concrete gravity dam is compared against the results obtained from solving the numerical model for identifying the physical condition of the structure.

• Steel and Composite Structures
• /
• 제33권3호
• /
• pp.445-461
• /
• 2019

The ultrasonic guided wave-based technique has become one of the most promising methods in non-destructive evaluation and structural health monitoring, because of its advantages of large area inspection, evaluating inaccessible areas on the structure and high sensitivity to small damage. To further advance the development of damage detection technologies using ultrasonic guided waves for the inspection of welded components in structures, the transmission characteristics of the ultrasonic guided waves propagating through welded joints with various types of defects or damage in steel plates are studied and presented in this paper. A three-dimensional (3D) finite element (FE) model considering the different material properties of the mild steel, high strength steel and austenitic stainless steel plates and their corresponding welded joints as well as the interaction condition of the steel plate and welded joint, is developed. The FE model is validated against analytical solutions and experimental results reported in the literature and is demonstrated to be capable of providing a reliable prediction on the features of ultrasonic guided wave propagating through steel plates with welded joints and interacting with defects. Mode conversion and scattering analysis of guided waves transmitted through the different types of weld defects in steel plates are performed by using the validated FE model. Parametric studies are undertaken to elucidate the effects of several basic parameters for various types of weld defects on the transmission performance of guided waves. The findings of this research can provide a better understanding of the transmission behaviour of ultrasonic guided waves propagating through welded joints with defects. The method could be used for improving the performance of guided wave damage detection methods.

• Smart Structures and Systems
• /
• 제16권1호
• /
• pp.223-242
• /
• 2015

Wireless sensor networks (WSNs) have emerged as a novel solution to many of the challenges of structural health monitoring (SHM) in civil engineering structures. While research projects using WSNs are ongoing worldwide, implementations of WSNs on full-scale structures are limited. In this study, a WSN is deployed on a full-scale 17.3m-long, 11-bay highway sign support structure to investigate the ability to use vibration response data to detect damage induced in the structure. A multi-level damage detection strategy is employed for this structure: the Angle-between-String-and-Horizon (ASH) flexibility-based algorithm as the Level I and the Axial Strain (AS) flexibility-based algorithm as the Level II. For the proposed multi-level damage detection strategy, a coarse resolution Level I damage detection will be conducted first to detect the damaged region(s). Subsequently, a fine resolution Level II damage detection will be conducted in the damaged region(s) to locate the damaged element(s). Several damage cases are created on the full-scale highway sign support structure to validate the multi-level detection strategy. The multi-level damage detection strategy is shown to be successful in detecting damage in the structure in these cases.

• Smart Structures and Systems
• /
• 제19권1호
• /
• pp.1-10
• /
• 2017

The operation of subway trains induces secondary structure-borne vibrations in the nearby underground spaces. The vibration, along with the associated noise, can cause annoyance and adverse physical, physiological, and psychological effects on humans in dense urban environments. Traditional tethered instruments restrict the rapid measurement and assessment on such vibration effect. This paper presents a novel approach for Wireless Smart Sensor (WSS)-based autonomous evaluation system for the subway train-induced vibrations. The system was implemented on a MEMSIC's Imote2 platform, using a SHM-H high-sensitivity accelerometer board stacked on top. A new embedded application VibrationLevelCalculation, which determines the International Organization for Standardization defined weighted acceleration level, was added into the Illinois Structural Health Monitoring Project Service Toolsuite. The system was verified in a large underground space, where a nearby subway station is a good source of ground excitation caused by the running subway trains. Using an on-board processor, each sensor calculated the distribution of vibration levels within the testing zone, and sent the distribution of vibration level by radio to display it on the central server. Also, the raw time-histories and frequency spectrum were retrieved from the WSS leaf nodes. Subsequently, spectral vibration levels in the one-third octave band, characterizing the vibrating influence of different frequency components on human bodies, was also calculated from each sensor node. Experimental validation demonstrates that the proposed system is efficient for autonomously evaluating the subway train-induced ambient vibration of underground spaces, and the system holds the potential of greatly reducing the laboring of dynamic field testing.

• 한국지리정보학회지
• /
• 제22권2호
• /
• pp.97-106
• /
• 2019

오늘날 수많은 건설 시설물 중에서 항상 시설하여 관리해야하는 다양한 중대형 교량구조물의 안전상황을 점검하기 위하여 여러 가지의 계측장비를 이용하고 있지만 대부분 일정한 주기별로 교량의 변위거동을 측정하고 확인하는 방법을 사용하고 있다. 지속적으로 안전상황을 점검하기 위하여 여러 가지의 계측장비를 이용하고 있지만 대부분 실시간으로는 주요 시설물의 변위와 거동을 측정하고 상시적으로 확인하지 못하고 있는 것이다. 본 연구에서는 대형 교량구조물의 운행에 위험을 사전에 감지할 수 있도록 GNSS 및 환경센서와 드론영상 데이터를 무선 네트워크로 전송하여 사용할 수 있도록 하였다. 그 결과, 실시간으로 교량의 미세변위와 그 상태를 진단함으로서 위험 요소가 예상되는 교량의 구조부에 대한 보강, 수리 및 재해 방지 조치가 가능하도록 하여, 각종 재난과 사고를 사전에 예방하고 방재할 수 있는 새로운 대안을 제시할 수 있었다.

• 항공우주시스템공학회지
• /
• 제12권6호
• /
• pp.32-40
• /
• 2018

본 연구에서는 error-outlier 기반의 충격위치탐지 알고리즘과 다중화된 FBG 센서를 이용하여 탄소섬유 강화 플라스틱 복합재 평판 구조물에 대한 충격위치탐지를 수행하였다. 알고리즘의 주요 변수인 오차 임계값(ET)이 0.3 nm, 상수 수준(CL)이 110일 때 최적의 충격위치탐지 결과(최대 오차= 31.82 mm, 평균 오차= 6.31 mm)가 도출되었다. 또한 주어진 최적의 변수 조건에서의 충격위치탐지 과정과 결과를 상세히 분석하였다. 본 연구에서 제시된 다중화된 FBG 센서와 error-outlier 기반의 충격탐지 알고리즘은 복합재 구조물에 대한 충격탐지에 적합한 것으로 판단되며, 향후 다양한 구조 건전성 감시에 활용될 것으로 기대된다.

• Structural Engineering and Mechanics
• /
• 제69권4호
• /
• pp.407-416
• /
• 2019

This paper develops a wireless sensor for online fatigue crack detection and failure warning based on crack-induced nonlinear ultrasonic modulation. The wireless sensor consists of packaged piezoelectric (PZT) module, an excitation/sensing module, a data acquisition/processing module, a wireless communication module, and a power supply module. The packaged PZT and the excitation/sensing module generate ultrasonic waves on a structure and capture the response. Based on nonlinear ultrasonic modulation created by a crack, the data acquisition/processing module periodically performs fatigue crack diagnosis and provides failure warning if a component failure is imminent. The outcomes are transmitted to a base through the wireless communication module where two-levels duty cycling media access control (MAC) is implemented. The uniqueness of the paper lies in that 1) the proposed wireless sensor is developed specifically for online fatigue crack detection and failure warning, 2) failure warning as well as crack diagnosis are provided based on crack-induced nonlinear ultrasonic modulation, 3) event-driven operation of the sensor, considering rare extreme events such as earthquakes, is made possible with a power minimization strategy, and 4) the applicability of the wireless sensor to steel welded members is examined through field and laboratory tests. A fatigue crack on a steel welded specimen was successfully detected when the overall width of the crack was around $30{\mu}m$, and a failure warnings were provided when about 97.6% of the remaining useful fatigue lives were reached. Four wireless sensors were deployed on Yeongjong Grand Bridge in Souht Korea. The wireless sensor consumed 282.95 J for 3 weeks, and the processed results on the sensor were transmitted up to 20 m with over 90% success rate.

• Structural Engineering and Mechanics
• /
• 제71권1호
• /
• pp.57-63
• /
• 2019

During the last two decades, much joint research regarding vibration based methods has been done, leading to developing various algorithms and techniques. These algorithms and techniques can be divided into modal methods and signal methods. Although modal methods have been widely used for health monitoring and damage detection, signal methods due to higher efficiency have received considerable attention in various fields, including aerospace, mechanical and civil engineering. Signal-based methods are derived directly from the recorded responses through signal processing algorithms to detect damage. According to different signal processing techniques, signal-based methods can be divided into three categories including time domain methods, frequency domain methods, and time-frequency domain methods. The frequency domain methods are well-known and interest in using them has increased in recent years. To determine dynamic behaviours, to identify systems and to detect damages of bridges, different methods and algorithms have been proposed by researchers. In this study, a new algorithm to detect seismic damage in the bridge's piers is suggested. To evaluate the algorithm, an analytical model of a bridge with simple spans is used. Based on the algorithm, before and after damage, the bridge is excited by a sine force, and the piers' responses are measured. The dynamic specifications of the bridge are extracted by Power Spectral Density function. In addition, the Least Square Method is used to detect damage in the bridge's piers. The results indicate that the proposed algorithm can identify the seismic damage effectively. The algorithm is output-only method and measuring the excitation force is not needed. Moreover, the proposed approach does not need numerical models.

• Composites Research
• /
• 제31권6호
• /
• pp.429-434
• /
• 2018

본 연구에서는 구조물에 부착된 분포형 광섬유 센서의 변형률을 정밀하게 분석하기 위해 위치에 따른 변형률의 변화를 고려하여 광섬유 센서의 변형률 전달률을 분석하였다. 표면에 부착된 코팅된 광섬유 센서의 모델로부터 해석적으로 광섬유 센서의 변형률 전달률을 유도하였으며, 유도된 변형률 전달률은 유한요소해석을 통해 수치적으로 해석한 결과와 비교 검증하였다. 주 구조물의 변형률이 동일한 파장을 가지며 변하는 경우 센서의 변형률 전달률은 위치에 따라 동일한 값을 보였으며, 따라서 변형률 분포의 형상은 왜곡되지 않는다. 하지만 위치에 따라 변형률 파장이 변하면 변형률의 전달률이 위치에 따라 달라져 변형률 분포의 형상이 왜곡될 수 있음을 확인하였다. 본 연구를 통해 얻어진 파장에 따른 변형률 전달률은 분포형 광섬유 센서로부터 주 구조물의 변형률 분포를 정밀하게 추정하는데 유용하게 사용될 것으로 기대된다.