• 산경연구논집
• /
• 제13권9호
• /
• pp.11-26
• /
• 2022

Purpose: Manufacturers rely on interfirm governance mechanisms to reduce the risks inherent in uncertain environments; however, it is unclear which governance mechanisms are developed to manage relationships with suppliers. This study sought to enhance knowledge of how environmental uncertainty affects interfirm governance mechanisms under conditions reflecting varying levels of structural holes. To this end, the study investigated the relationships between manufacturers and major first-tier and sub-suppliers. In particular, the moderating effect of structural holes is examined. Research design, data and methodology: A questionnaire survey was conducted with a major first-tier supplier of a Korean engineering firm. Proposed hypotheses were tested using structural equation modeling. Results: The results show that while the relationship between environmental uncertainty and unilateral governance is positive but statistically insignificant, with bilateral governance is negative and statistically significant. The study also demonstrates that when structural holes are considered, the effects between environmental uncertainty and governance mechanisms are attenuated. Conclusions: This study suggests some theoretical and managerial contributions between exchange partners, especially, the results suggest that structural holes have a critical competitive advantage in uncertain environments. Therefore, manufacturers should carefully consider how they deal with environmental uncertainty when they make a business decision under structural holes situations.

• Steel and Composite Structures
• /
• 제51권3호
• /
• pp.225-241
• /
• 2024

For several reasons, cold-formed steel (CFS) beams are often manufactured with holes. Nevertheless, because of holes, the reduction in the web area causes a decrease in the bending strength. Edge stiffeners are presently added around the holes to improve the bending strength of flexural members. Therefore, this research studies CFSZ-beams with stiffened holes and investigates how edge stiffener affects bending strength and failure modes. Nonlinear analysis was carried out using ABAQUS software and the developed finite element (FE) model was verified against tests from previous studies. Using the verified FE model, a parametric study of 104 FE models was conducted to investigate the influence of key parameters on bending strength of Z- sections. The results indicated that the effect of holes is less noticeable in very thin Z-sections. Moreover, adding edge stiffeners around the holes improves the flexural capacity of Z-beams and sometimes restores the original bending capacity. Because the computational techniques used to solve the CFS buckling mode with stiffened holes are still unclear, a numerical method using constrained and unconstrained finite strip method (CUFSM) software was proposed to predict the elastic distortional buckling moment for a wide variety of CFSZ-sections with stiffened holes. A numerical method with two procedures was applied and validated. Upon comparison, the numerical method accurately predicted the distortional buckling moment of CFS Z-sections with stiffened holes.

• 유통과학연구
• /
• 제16권6호
• /
• pp.25-35
• /
• 2018

Purpose - Although marketing networks are crucial competitive advantage in terms of firm's new information and resource acquisition ability, their impact on new product development performance remains vague, especially under environmental uncertainty. The principal objective of this research is to provide a better understanding of effects of technological uncertainty and volume uncertainty on first tier supplier's perceived performance of new product development under conditions reflecting varying levels of structural holes. Specifically, this research examines the moderating effect of structural holes on the relationship between environmental uncertainty and new product development performance. Research design, data, and methodology - To test the hypotheses, a questionnaire survey was conducted with a Korean engineering firm's major first-tier suppliers in the context of internal network entities, manufacturer-supplier-subsupplier relationships, and to verify the proposed hypotheses, structural equation modeling was established. Construct measures were based on existing measures and previous research. Results - The survey results indicate that technological uncertainty and volume uncertainty differentially affect NPD performance under conditions of high and low structural holes. Conclusions - This study offer some theoretical and practical implications among distribution channel members, especially, this study suggests that interfirm networks have critical competitive advantage in uncertain environments. The distinctiveness of engineering industry might limit the generalizability of the results. Thus, future research should consider a wider range of industries.

• 디지털산업정보학회논문지
• /
• 제14권2호
• /
• pp.133-141
• /
• 2018

The purpose of this study was to propose a model of knowledge transfer in IT outsourcing. In this study, structural holes were chosen as antecedent factors, and job performance as a consequence factor. We conducted a survey in which we collected data from 42 respondents working in one of the leading IT companies in Seoul, South Korea. The data were analyzed using UCINET 6 and SmartPLS 2.0. The antecedent factors (structural holes in closeness network and in professional network) turned out to be statistically significant. Knowledge transfer considerably influenced job performance. Lastly, implications and limitations of these findings were discussed, and directions for future research were suggested.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권4호
• /
• pp.155-160
• /
• 2001

KS-code(KS B 0896) for nondestructive ultrasonic testing classifies the quality level by relative flaw size only. But flaw position is more important than the flaw size. Test blocks having artificial holes near surface show lower yield load than the blocks having deeply located holes from the surface. So, level calibration table was proposed for classifying the quality level of welded steel structures.

• 한국전산구조공학회논문집
• /
• 제17권4호
• /
• pp.405-412
• /
• 2004

재료나 핵연료조사시험에서 다공원통형구조물의 모든 구성품에서 감마열 및 fission과 같은 열원이 발생한다. 본 연구는 조사시험중 다공원통형구조물의 열적건전성을 평가하기 위해 온도분포에 대한 일반해를 구하는데 그 목적이 있다. 다공원통형 구조물의 온도해석을 위해 2차원 열전토 방정식을 이용하였다. 유한요소해석은 ANSYS 6.1을 이용하여 수행하였다. 다공원통형 구조물의 온도해석에서 이론해석결과와 유한요소해석결과는 홀의 개수가 3개 이하에서는 온도가 서로 잘 일치하는 것으로 나타났다. 구조물의 홀 개수가 4개일때, 온도분포해석에 대한 두 결과의 차이가 증가하였다.

• Structural Engineering and Mechanics
• /
• 제61권6호
• /
• pp.747-754
• /
• 2017

Exact solutions for stresses for an infinite rectangular plate perforated by two circular holes of different radii subjected to uni-axial or bi-axial uniform loads are investigated using the Airy stress function. The hoop stresses occurring at the edge of the circular hole are computed and plotted. Comparisons are made for the stress concentration factors for several types of loading conditions.

• 한국자동차공학회논문집
• /
• 제22권5호
• /
• pp.44-49
• /
• 2014

As expansion and contraction of bike disk brake are happened continuously by temperature at repeated urgent braking. In this study, 3 kinds of model are designed according to configurations of holes and thermal durabilities on bike disk brake are investigated by comparing 3 models through temperature and thermal analyses. Maximum thermal stress happened at the disk contacted with pad and the connection part fixing disk rotor. Instead of initial state, the temperature is uniformly distributed at transient state. As the area of hole at disk rotor face becomes wider, thermal stress becomes lower at the initial state. On the other hand, in case the number of holes increases, thermal stress becomes lower at the elapsed time of 100 seconds. The thermal durability of bike disk brake can be improved by applying this study result with configurations of holes.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권6호
• /
• pp.126-131
• /
• 2017

저유속 조건에서 소수력 에너지 생산 효율 증진을 위한 항력식 수직축 수차를 개발하기 위하여 전산 유체 동역학(CFD) 기법을 이용하여 수치해석을 수행하였다. 1.0~3.0 m/s의 유속 조건에서 수차 블레이드의 타공 유무에 따른 블레이드 압력 변화와 내부유동을 분석하였다. 수치해석 결과, 타공이 있는 경우 유속에 따라 수차 블레이드의 압력 및 유체 속도가 영향을 크게 받는 것으로 나타난 반면에, 타공이 없는 경우에는 유속에 따른 수차 블레이드의 압력 및 유체 속도의 영향이 상대적으로 감소하는 것으로 나타났다. 또한, 타공이 포함되지 않은 수차 블레이드에 비교하여 타공이 포함된 수차 블레이드 표면에서 압력 분포와 유체의 속도가 고르게 나타났으며, 따라서 수차 블레이드에 타공을 형성하는 것이 구조안전성 측면에서 도움이 될 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제28권1호
• /
• pp.53-67
• /
• 2008

Anisotropic materials are increasingly required in modern technological applications. Certainly, civil, mechanical and naval engineers frequently deal with the situation of analyzing the dynamical behaviour of structural elements being composed of such materials. For example, panels of anisotropic materials must sometimes support electromechanical engines, and besides, holes are performed in them for operational reasons e.g., conduits, ducts or electrical connections. This study is concerned with the natural frequencies and normal modes of vibration of rectangular anisotropic plates supported by different combinations of the classical boundary conditions: clamped, simply - supported and free, and with additional complexities such holes of free boundaries and attached concentrated masses. A variational approach (the well known Ritz method) is used, where the displacement amplitude is approximated by a set of beam functions in each coordinate direction corresponding to the sides of the rectangular plate. Consequently each coordinate function satisfies the essential boundary conditions at the outer edge of the plate. The influence of the position and magnitude of both hole and mass, on the natural frequencies and modal shapes of vibration are studied for a generic anisotropic material. The classical Ritz method with beam functions as spatial approximation proved to be a suitable procedure to solve a problem of such analytical complexity.