• 한국공간구조학회논문집
• /
• 제20권2호
• /
• pp.39-49
• /
• 2020

In this study, we will develop a hybrid cross-sectional shape of steel inserted type glued-laminated timber that can improve the strength of structural glued-laminated timber and maximize the ductility by using steel plate with excellent tensile and deformation ability. A total of three specimens were fabricated and the flexural performance test was carried out to evaluate the structural performance of the steel inserted type glued-laminated timber. In order to compare the effect of steel inserted glued-laminated timber, one structural glued-laminated timber test specimen composed of pure wood was manufactured. In addition, in order to evaluate the adhesion performance of the steel inserted, one each of a screw joint test specimen and a polyurethane joint test specimen was prepared. As a result, all the specimens showed the initial crack in the finger joint near the force point. This has been shown to be a cause of crack diffusion and strength degradation. The use of finger joints in the maximum moment section is considered to affect the strength and ductility of the glued-laminated timber beam. Polyurethane-adhesive steel inserted glued-laminated timber showed fully-composite behavior with little horizontal separation between the steel plate and glued-laminated timber until the maximum load was reached. This method has been shown to exhibit sufficient retention bending performance.

• Journal of the Korean Wood Science and Technology
• /
• 제38권5호
• /
• pp.399-404
• /
• 2010

A new green home designed to save money while at the same time saving the environment with some of the finest green features available in the market. Composite column composed of structural steel and structural glued laminated timber is avery Eco-friendly building products for design building because that use recycled or second hand. For compare to compressive strength of structural glued laminated timber (glulam), structural steel, and composite column (steel-glulam), tested compressive strength of each specimen. 1) structural glued laminated timber : Theoretical compressive strength is 151.6 kN similar to elastic limits. 2) structural steel (H type) : Theoretical compressive strength is 148.2 kN little under the elastic limits. 3) structural steel (D type) : Theoretical compressive strength is 147.3 kN upper than the elastic limits. 4) composite column : Actual elastic limits are about 600 kN. Result in, composite column improve compressive strength of Structural steel column and provide structural stability of the building.

• Journal of the Korean Wood Science and Technology
• /
• 제37권4호
• /
• pp.300-309
• /
• 2009

목재를 이용한 구조의 효율적인 사용은 자원의 낭비를 줄이고 세계 환경을 보호할 수 있다. 이 연구는 대단면 목조건축을 위해 강재와 구조용 집성재를 이용한 내화성능을 지닌 복합재료의 개발을 목적으로 한다. 내화 시험에 앞서 구조용 강재와 구조용 집성재를 이용한 복합재료의 휨강도 특성을 확인하고자 한다. 구조용 강재 보(H type)와 구조용 집성재 보, 구조용 강재와 구조용 집성재를 이용한 복합재료 보의 휨시험을 시행하였다. 구조용 집성재간의 접착제로는 레졸시놀계를 사용하였으며 구조용 강재와 구조용 집성재 간의 접착제로는 폴리우레탄 수지를 사용하였다. 휨시험은 KS F 2150에 의거하여 시행하였으며 각각의 평균 최대하중은 복합재료가 137.5 kN, 구조용 집성재가 106.5 kN, 구조용 강재가 48 kN을 나타내었다. 구조용 집성재가 높은 휨탄성력을 지니고 있기 때문에 복합재료를 사용할 경우 구조적 안정성을 부여할 뿐 아니라 친환경적인 재료로 이용될 수 있을 것이다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.23-24
• /
• 2023

In this study, an easily recyclable separable glued-laminated timber (GLT)-steel beam was developed, and a structural design method was presented. The GLT and steel were mechanically composited using self-tapping screws. The GLT-steel beam was designed to fail in the compression of GLT. The bending moment and load-carrying capacity of the GLT-steel beam were predicted based on composite beam theory and compared with experimental test data. As a result, the GLT-steel beam exhibited ductile behavior, and compression failure of GLT was observed. The screw connection showed no damage while the steel plate was extended. The load-carrying capacity of GLT after failure was similar to the load resistance predicted by the compressive strength of GLT and the tensile strength of steel. This indicates that the ductile behavior of the GLT-steel beam can be safely designed by the tensile strength (yield) of steel.

• 한국건축시공학회지
• /
• 제23권6호
• /
• pp.761-772
• /
• 2023

목구조 내화설계는 탄화두께를 이용하여 설계에 반영할 잔존단면을 산정하여 구조설계에 반영한다. 유럽이나 미국에서는 목재의 특성에 따라 탄화두께를 제시하여 적용하고 있으며, 국내에서는 내화시험을 통해 탄화두께를 산출하고 있다. 본 연구에서는 국내 구조용 집성재에 사용되고 있는 접착제별로 구조용 집성재를 제작하여 접착제 종류에 따른 탄화특성과 접착면의 방향성에 따라 내화성능에 미치는 영향을 비교하였다. 집성재 집성 시 사용되는 접착제중 멜라민이 내화성능에 가장 유리한 것으로 나타났으며, 다음으로 레소시놀, 폴리우레탄 순이었다. 또한 적층면보다는 적층단면이 접착제의 영향으로 인해 탄화속도가 커서 내화성능에 더 많은 영향을 주는 것으로 확인되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제44권3호
• /
• pp.449-456
• /
• 2016

본 연구의 목적은 국산 구조용 집성재를 대상으로, 제조과정의 탄소배출을 정량화하고 탄소배출 저감방안을 제시하는 것이다. 총 2개소의 구조용 집성재 제조업체를 대상으로 원료, 수송, 제조 공정, 제조에 의한 에너지소비량 등을 현장 실사하였다. 현장에서 수집한 자료 및 구축된 전과정목록과 같은 관련문헌을 토대로 단위부피당 탄소배출을 정량화하였다. 국산 구조용 집성재의 제재 및 건조, 집성 공정별 온실가스 배출결과는 각각 31.0, 109.0, 94.2 kg $CO_2eq./m^3$으로 나타났다. 수입 구조용 집성재와 비교하였을 때 약 13% 온실가스를 적게 배출하는 것으로 나타났다. 또한 기존의 건조 에너지원을 바이오매스로 전환시에는 기존 대비 37%의 온실가스를 감축하여 친환경성을 제고할 수 있을 것으로 판단되었다. 본 결과는 향후 목조주택의 환경성을 규명하기 위한 전과정평가 수행 시, 투입된 목재제품의 전과정목록분석을 위한 기초자료로 활용될 것으로 기대된다.

• Journal of the Korean Wood Science and Technology
• /
• 제43권5호
• /
• pp.682-690
• /
• 2015

The bonding performance of two types of wood adhesives, namely phenol-resorcinol-formaldehyde (PRF) resin and melamine-urea-formaldehyde (MUF) resin for glued laminated timber manufactured by high frequency (HF) heating was evaluated. The HF heating system consists of HF oscillator with dielectric heating system for curing adhesives, and hydraulic press system for clamping glued laminated timber. The designed frequency and output power of the HF system was as 5 MHz and 60 kW, respectively. To verify dielectric heating mechanism under HF oscillation, the heat loss factors of laminae and adhesives were measured. The results show that it is possible to selectively heat adhesives for their curing due to the remarkably higher loss factor of the adhesives than those of wood laminae. The temperature of adhesive in the bonding line reached up to the set temperature within a few seconds by high frequency oscillating, which advanced the curing of adhesive afterwards. The bonding performance, such as shear strength of bonding line, water soaking delamination, and boiling water soaking delamination of PRF resin met the requirement of Korean Standard (KS), however the MUF resin did not meet the KS requirement of boiling water soaking delamination. These results indicate that the HF heating system is successful to manufacture glued laminated timbers with PRF resins to meet the bonding requirements.

• Journal of the Korean Wood Science and Technology
• /
• 제44권4호
• /
• pp.607-615
• /
• 2016

The delamination along the annual ring on the cross-section of laminae and the bonding strength according to the tangential angle between laminae were evaluated for the production of 3-ply cross-laminated timber (CLT) using domestic larch. Since there is no standard for CLT in Korea, the production and test of specimens for bonding strength followed the standard procedure of "Structural glued laminated timber" (KS F 3021). The standard specifies to exclude any measurement from the cracks of timbers resulted from drying or knots during delamination test of the glued laminated timbers. However, the failure of cross-sectional tissues along the annual rings was observed near the glue-line of all specimens during the delamination test. Because this phenomenon can generate defects in the CLT that may be exposed to various temperatures and relative humidities after the actual construction, the delamination percentage was measured by including this wood failure. As a result, the delamination percentage of the CLT which had been combined in such a way that the annual rings of outer lamina were directed inward was the lowest, which was around 13%, regardless of the annual ring direction of the middle lamina. On the other hand, the delamination percentage of the CLT which had been combined in such a way that the annual rings of outer lamina were directed outward was the highest, which was around 26%. Furthermore, end-split occurred in the outer lamina during the drying process of the boiling delamination test, which affected the delamination percentage. Therefore, the soaking delamination test was found to be more appropriate for evaluating the delamination strength of CLT. The block shear strength of larch CLT was $3.9{\pm}0.9$ MPa on average, which was 46% lower than the block shear strength requirement (7.1 MPa) of the standard, but satisfied the criteria of the block shear strength (3.5 MPa) of the European Standard (prEN 16351: 2013).

• 한국건축시공학회지
• /
• 제24권3호
• /
• pp.331-341
• /
• 2024

본 연구에서는 구조용 집성재 보의 휨강도 및 연성능력을 보완하고자 강재-목재 합성보의 휨성능을 평가하였다. 실험체는 구조용 집성재 보 1식과 강재-목재 합성보 2식으로 구성하였다. 강재-목재 합성보는 부착 방법에 따라 액상형 접착제와 나사못을 사용하여 휨성능을 평가하였다. 실험결과, 강재-목재 합성보는 구조용 집성재 보에 비하여 구조성능이 약 2~3배 높아 휨강도 및 연성능력이 충분히 확보된 것으로 나타났다. 또한, 액상형 접착제를 사용한 경우가 나사못을 적용한 실험체에 비하여 우수한 구조성능을 보여주었다.

• Journal of the Korean Wood Science and Technology
• /
• 제44권1호
• /
• pp.30-39
• /
• 2016

구조용 집성재 라멘 접합부에 일반적으로 사용되는 접합철물을 대신하여 단판과 Glass Fiber Reinforced Plastic (GFRP)를 복합시킨 GFRP 보강적층판과 삽입 접착형 GFRP rod를 접합물로 사용하여 낙엽송 집성재 문형라멘 구조의 수평가력 성능평가를 실시하였다. 실험결과 GFRP rod와 에폭시 접착제를 이용한 삽입 접착형 접합부는 기존의 접합철물을 이용한 실험체와 비교하여 항복내력, 종국내력, 초기강성이 각각 49%, 52%, 61% 낮게 측정되었다. 이러한 접합부는 GFRP rod와 집성재 간의 접착력이 중요한 내력 기구로 현장적용 시 문제가 발생할 수 있는 가능성이 크다고 판단된다. 반면, GFRP 보강적층판과 목재(Eucalyptus marginata)핀을 이용한 실험체는 집성재 슬릿 접합부의 단면적 손실이 큼에도 불구하고 항복내력, 종국내력, 초기강성, 소성률이 전부 3% 이내로 측정되었다. 게다가 사이클에 대한 강성변화율도 35%로 가장 낮게 측정되며 접합철물을 이용한 실험체와 거의 동등한 성능을 발휘한 것을 확인하였다.