• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.127-133
• /
• 2003

In this study, a problem formulation and solution for design optimization of laminate composite cylindrical beam section is presented. The objective of this research is to determine the optimal dimension of the laminated composite cylindrical beam sections which has the equivalent flexural rigidities to those of the steel cylindrical beam sections. The analytical model is based on the laminate theory and accounts for the material coupling for arbitrary laminate stacking sequence configuration. The outer diameter and thickness of the beam are design variables. The solutions described are found using a global search algorithm, Genetic Algorithms (GA).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.350-355
• /
• 2005

All the facility, the structure and the rolling stock have limited life so after starting use, we must decide disuse or use when it exeeds the lifetime. Currently the subway which exeeds the lifetime appeared in our country. Structural members of rolling stock structures were occurred corrosion after passage of time and It gives a many effect in the structure strength. In this study, it accomplished a structural analysis which use FEM for the No.2 subway line which operated currently, and it investigated the structural strength change which it follows with dimension change of structural members due to corrosion

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2004년도 추계 학술발표대회 논문집
• /
• pp.28-29
• /
• 2004

• Composites Research
• /
• 제28권5호
• /
• pp.285-290
• /
• 2015

구조전지에서 멀티스케일로 일어나는 다중물리현상은 기계적 물성을 테스트하는 것을 어렵게 한다. 본 연구에서는 구조전지 셀에 적합한 기계적 물성 테스트 방법을 이용하여 탄소섬유직물의 전해질 코팅이 기계적 성능에 미치는 효과를 알아보았다. 이를 위해 ASTM의 표준 시편 규격을 참고하여 2가지 종류의 시편을 제작하였다. 기계적 물성 실험은 탄소섬유직물에 전해질을 도포하여 전해질 코팅을 수행하고 이를 다시 에폭시에 경화를 시켜 시편을 만들고 만능 인장시험기를 이용하여 인장실험을 진행하였다. 실험결과, 탄소섬유직물에 전해질의 코팅이 기계적물성에는 큰 영향을 주지 않음을 확인할 수 있었다. 또한 실험에 이용한 축소된 규격의 시편이 타당함을 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제48권6호
• /
• pp.791-807
• /
• 2013

Ultra High Performance Cementitious Composites with compressive strength 200MPa (UHPCC-200) is proposed for the structural design of super high hybrid wind turbine tower to gain durability, ductility and high strength design objectives. The minimal wall thickness is analyzed using basic bending and compression theory and is modified by a toque influence coefficient. Two cases of wall thickness combination of middle and bottom segment including varied ratio and constant ratio are considered within typical wall thickness dimension. Using nonlinear finite element analysis, the effects of wall thickness combinations with varied and constant ratio and prestress on the structural stress and lateral displacement are calculated and analyzed. The design limitation of the segmental wall thickness combinations is recommended.

• Structural Engineering and Mechanics
• /
• 제21권5호
• /
• pp.495-506
• /
• 2005

A neural network based model is developed for the structural analysis of masonry infilled steel frames, which can account for the non-linearities in the material properties and structural behaviour. Using the data available from the analytical methods, an ANN model with input parameters consisting of dimension of frame, size of infill, properties of steel and infill was developed. It was found to be acceptable in predicting the failure modes of infilled frames and corresponding failure load subject to limitations in the training data and the predicted results are tested using the available experimental results. The study shows the importance of validating the ANN models in simulating structural behaviour especially when the data are limited. The ANN model was also compared with the available experimental results and was found to perform well.

• 한국농공학회논문집
• /
• 제50권1호
• /
• pp.49-57
• /
• 2008

This study evaluated the flexural properties and fire resistance of polyolefm based structural synthetic fiber reinforced concrete. The effects of differing fiber length, dimension and fiber volume fraction were studied. Flexural and fire resistance test were conducted in accordance with the JCI SF-4 and RABT time heating temperature curve, respectively. The Flexural test results indicated that the polyolefln based structural fiber reinforcement showed an ability to increase the flexural toughness and good fire resistance significantly(as compared to steel fiber reinforcement).

• Journal of the Korean Data and Information Science Society
• /
• 제28권4호
• /
• pp.889-898
• /
• 2017

In this research multiple change-points estimation for South Korean electricity generation data is considered. We analyze the South Korean electricity data via deterministically trending dynamic time series model with multiple structural changes in trends in a Bayesian approach. The number of change-points and the timing are unknown. The goal is to find the best model with the appropriate number of change-points and the length of the segments. A genetic algorithm is implemented to solve this optimization problem with a variable dimension of parameters. We estimate the structural change-points for South Korean electricity generation data and Nile River flow data additionally.

• Educational Technology International
• /
• 제9권2호
• /
• pp.39-56
• /
• 2008

This paper investigates the relationship between the structural characteristics of a virtual CoP and the measures of social network analysis. Several implications were developed by the results of the study First, the study, based on reviews of both the CoP and SNA literature, identified specific structural measures of SNA; connectedness, geodesic distance, and density. Second, the formal CoP investigated in this study showed greater development that the classic, informal CoP in terms of the structural dimension of a CoP. The results show that those measures of social network analysis provide an illuminating way to better understand the structural properties of CoP's. Implications of the study with some suggestions for future research are provided.

• Child Health Nursing Research
• /
• 제26권2호
• /
• pp.222-237
• /
• 2020

Purpose: The purpose of this study was to analyze the concept of social support of nursing students using a hybrid model and to derive a definition and attributes of social support through theoretical, fieldwork, and final analysis stages. Methods: Twenty-nine studies were analyzed in the theoretical stage. Seventeen in-depth interviews were conducted with nursing students in the fieldwork stage. In the final analysis stage, the concept of social support was defined and the attributes were derived by integrating the theoretical and fieldwork stages. Results: The attributes of social support of nursing students identified in the final analysis consisted of two dimensions and eight attributes. The two dimensions were structural and functional support. The eight attributes were social network, educational, emotional, informational, economic, positive evaluation, self-esteem support, and support by providing a role model provision. The structural dimension included the social network support attribute. The functional dimension included the remaining seven attributes. Educational support and support by providing of a role model provision were newly derived attributes that reflected specific characteristics of nursing students. Conclusion: Based on the results of this study, we suggest that researchers should attempt to develop a scale to measure the social support of nursing students.