• Journal of the Korean Mathematical Society
• /
• v.36 no.3
• /
• pp.581-592
• /
• 1999

Let M be a properly immersed timelike hypersurface of $\overline{M}$. If M is a diagonal type, M satisfies the generic condition under the certain conditions of the eigenvalues of the shape operator. Moreover, applying them to Raychaudhuri equation, we can show that M satisfies the generic condition. Thus, by these results, we establish the singularity theorem for M in $\overline{M}$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.5
• /
• pp.526-529
• /
• 2004

The nematic liquid crysta](NLC) aligning capabilities using a-C:H thin film deposited at the three kinds of rf bias condition were investigated. A high pretilt angle of NLC on low substrate rf bias applied a-C:H thin films was observed and the low pretilt angle of the NLC on high substrate rf bias applied a-C:H thin films was observed. Consequently, the high NLC pretilt angle and the good aligning capabilities of LC alignment by the IB alignment method on the a-C:H thin film deposited at 1 W rf bias condition can be achieved. It is considered that pretilt angle of the NLC may be attributed to substrate rf bias condition and IB energy time. Therefore, LC alignment is affected by topographical structure forming strong IB energy.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.3 s.43
• /
• pp.59-68
• /
• 2005

The energy-based seismic design method Is more rational in comparison with current seismic design code in that it can directly account for the effects of cumulative damage by earthquake and hysteretic behavior of the structure. However there are research results that don't reach a consensus depending on the ground motion characteristic and structural properties. For that reason in this study the influences of ground motion characteristics and structural properties on energy demands were evaluated using 100 earthquake ground motions recorded in different soil conditions, and the results obtained were compared with those of previous works. Results show that ductility ratios and sue conditions have significant influence on input energy. The results show that the ratio of hysteretic to input energy is considerably influenced by the ductility ratio, damping ratio, and strong motion duration, while the effect of site condition is insignificant.

• Structural Engineering and Mechanics
• /
• v.90 no.5
• /
• pp.493-504
• /
• 2024

This paper presents the methodology and results for the investigation of the structural safety of 40 aged underground water tanks to support the weight of photovoltaic (PV) systems that were supposed to be placed on their roof reinforced concrete (RC) slabs. The investigation procedure included (1) review of available documents; (2) visual inspection of the roof RC slabs; (3) carrying out a series of nondestructive (ND) tests; and (4) analysis of results. Out of the 40 tanks, eleven failed the visual inspection phase and were discarded from further investigation. The roof RC slabs of the tanks that passed the visual inspection were subjected to a series of ND tests that included infrared thermography, impact echo, ultrasonic pulse velocity (UPV), Schmidt hammer, concrete core compressive strength, and water-soluble chloride content. The NDT results proved that eight more tanks were not suitable to support the PV systems. Based on the results of the visual inspection and testing, a probabilistic decision-making criterion was established to reach a decision regarding the structural integrity of the roof slabs. The study concluded that the condition of the drainage filter was essential in protecting the tanks and its intact presence can be used as a strong indication of the structural integrity of the roof RC slabs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.87-90
• /
• 2009

A dual-cell-gap transflective liquid crystal display (TR-LCD) with identical response time in the transmissive and reflective regions is demonstrated. In the transmissive region, strong anchoring energy condition is used to decrease the response time, while in the reflective region weak anchoring energy condition is used to increase the response time. The simulated dual-cell-gap TR-LCD has good performances.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1955-1962
• /
• 2017

Induction motors are a workhorse for the industry. The condition monitoring and fault analysis are the main concern for the engineers. The bearing is one of the vital segment of the induction machine and the condition of the whole machine is decided based on the condition of the bearing. In the present paper, the vibration signal of the bearing has been used for the analysis. The first line of action is to perform a statistical analysis of the vibration signal which gives trends in signal. To get the location of a fault in the bearing the second action is to develop an index based on Wavelet Packet Transform node energy named as Bearing Damage Index (BDI). Further, Teager-Kaiser Energy Operator (TKEO) has been calculated from higher index value to get the envelope and finally Power Spectral Density (PSD) has been applied to identify the fault frequencies. A performance index has also been developed to compare the usefulness of the proposed method with other existing methods. The result shows that the strong amplitude of fault characteristics and its side bands help to decide the type of fault present in the recorded signal obtained from the bearing.

• Nuclear Engineering and Technology
• /
• v.53 no.3
• /
• pp.732-740
• /
• 2021

Scattering resonance of medium mass nuclides leads complex spectrum in the fast reactor, which requires thousands of energy groups in the spectrum calculation. When the broad-group cross sections are collapsed, reaction rate cannot be completely conserved. To eliminate the error from energy collapsing, the Super-homogenization method in energy collapsing (ESPH) was employed in the fast reactor code SARAX. An ESPH factor was derived based on the ESPH-corrected SN transport equation. By applying the factor in problems with reflective boundary condition, both the effective multiplication factor and reaction rate were conserved. The fixed-source iteration was used to ensure the stability of ESPH iteration. However, in the energy collapsing process of SARAX, the vacuum boundary condition was adopted, which was necessary for fast reactors with strong heterogeneity. To further reduce the error caused by leakage, an additional conservation factor was proposed to correct the neutron current in energy collapsing. To evaluate the performance of ESPH with conservation factor, numerical benchmarks of fast reactors were calculated. The results of broad-group calculation agreed well with the direct full-core Monte-Carlo calculation, including the effective multiplication factor, radial power distribution, total control rod worth and sodium void worth.

• Nuclear Engineering and Technology
• /
• v.54 no.4
• /
• pp.1321-1335
• /
• 2022

This study was conducted to investigate the effect of absorption coefficient models on the P1 radiation model for a premixed hydrogen flame containing the water vapor. A CFD combustion simulation analysis was performed using XiFoam, one of the open-source CFD solvers in OpenFOAM. The solver using the flamelet combustion model has been modified to implement radiative heat transfer. The absorption coefficient models used in this study the grey-mean model and constant model, and for comparison, case without radiation was added. This CFD simulation study consisted of benchmarking the THAI HD-15 and HD-22 experiments. The difference between the two tests is the inclusion of water vapor in the condition before ignition. In the case of the HD-22 experiment containing water vapor in the initial condition, the simulation results show that the grey-mean absorption coefficient model has a strong influence on the temperature decrease of the flame and on the change in pressure inside the vessel.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1437-1439
• /
• 1996

In this paper, investigations on a three stage processing technique involving the co-evaporation of In-Se, Cu-Se and In-Se in this order at different deposition condition was undertaken. At first stage, we obtained good $In_{2}Se_{3}$ films by In-Se coevaporation. $In_{2}Se_{3}$ films show smooth and dense structure. And ration of In:Se was 2:3 $CulnSe_2$ thin films deposited by three stage process have shown strong adhesion on Mo coated glass substrates and good morphological properties suitable device fabrication. XWD spectra show single phase chalcopyrite $CulnSe_2$ films with strong orientation in the 112 plane. Resistivity of $CulnSe_2$ thin films was about $5{\times}10^{5}\;{\Omega}{\cdot}cm$. Surface morphology of CdS/$CulnSe_2$/Mo films was very good because of no pin holes.

• Journal of Nutrition and Health
• /
• v.35 no.1
• /
• pp.124-136
• /
• 2002

As the elderly population has increased in recent years in Korea chronic degenerative diseases prevalent in the aged have garnered attention in relation to food behavior. In general, dietary intakes of elderly Koreans were inadequate in quality as well as in quantity. Especially, intakes of Ca, vitamin A, and riboflavin along with total energy were insufficient. They tended to consume high carbohydrate and low fat energy rates which may be resulted from long standing vegetable-based flood patterns. Relationships between dietary intakes and indices of cardiovascular diseases revealed that blood pressures and serum lipids patterns tended to be poor in individuals having high abdominal fat accumulations which seemed to be related with dietary consumption of high carbohydrate and insufficient intake of many nutrients. These results suggested that a nutritionally balanced diet including animal sources floods is needed in order to prevent an abdominal obesity and cardiovascular diseases. The bone health status of the Korean elderly appeared poor. It was more serious in women recording a higher prevalence rate of osteopenia and osteoporosis than in men. There were strong associations between dietary factors and bone health status. Bone mineral density was found to be higher with higher intakes of protein energy rate, the total amount of feeds, and many nutrients including Ca and p, indicating that a good quality diet is essential in maintaining healthy bone status in later life. mental health condition of the elderly as measured by cognitive function and the degree of depression was also inadequate and had strong association with dietary consumption. The positive results were obtained in individuals having an adequate dict. Therefore, it could be summarized that the physical as well as mental health in elderly Koreans are highly related with their dietary patterns. Thus, the older adults need te consume nutritionally well balanced diet in sufficient amount, which contains various flood items including significant amounts of animal source floods in a daily diet in order to maintain healthy condition.