1 |
G.W. Koroll, R.K. Kumar, E.M. Bowles, Burning velocities of hydrogen-air mixtures, Combust. Flame 94 (3) (1993) 330-340.
DOI
|
2 |
M.C. Krejci, et al., Laminar flame speed and ignition delay time data for the kinetic modeling of hydrogen and syngas fuel blends, J. Eng. Gas Turbines Power 135 (2013) 2.
|
3 |
S. Verhelst, T. Wallner, Hydrogen-fueled internal combustion engines, Prog. Energy Combust. Sci. 35 (6) (2009), 490-257.
DOI
|
4 |
R. Siegel, J.R. Howell, Thermal Radiation Heat Transfer, Hemisphere Pub. Corp., Washington DC, 1992.
|
5 |
M. Metghalchi, J.C. Keck, Burning velocities of mixtures of air with methanol, isooctane, and indolence at high pressure and temperature, Combust. Flame 48 (1982) 191-210.
DOI
|
6 |
C. Sohn, et al., A burning velocity correlation for premixed hydrogen/air/steam flames, KSME Int. J. 13 (3) (1999) 294-303.
DOI
|
7 |
B. Devolder, T. Peter, R. Pieter, Performance of a buoyancy-modified k-u and k-u SST turbulence model for simulating wave breaking under regular waves using OpenFOAM, Coast Eng. 138 (2018) 49-65.
DOI
|
8 |
P. Cheng, Two-dimensional radiating gas flow by a moment method, AIAA J. 2 (9) (1964) 1662-1664.
DOI
|
9 |
F.R. Menter, et al., Ten years of industrial experience with the SST turbulence model, Turbul., Heat Mass Transf. 4 (1) (2003) 625-632.
|
10 |
OECD/NEA Thai Project, NEA/CSNI/R(2011)9 (2012).
|
11 |
A.C. Rakhimov, et al., The role of CFD combustion modelling in hydrogen safety managementeVI: validation for slow deflagration in homogeneous hydrogen-air-steam experiments, Nucl. Eng. Des. 311 (2017) 142-155.
DOI
|
12 |
H.G. Weller, The Development of a New Flame Area Combustion Model Using Conditional Averaging. Thermo-fluids section report TF 9307, 1993.
|
13 |
OpenFOAM project web pages. http://www.openfoam.org.
|
14 |
OECD/NEA THAI Project, Hydrogen and fission product issues relevant for containment safety assessment under severe accident conditions, Final Rep., NEA/CSNI/R (2010), 3(2010).
|
15 |
F.R. Menter, Influence of freestream values on k-omega turbulence model predictions, AIAA J. 30 (6) (1992) 1657-1659.
DOI
|
16 |
V.L. Zimont, Gas premixed combustion at high turbulence. Turbulent flame closure combustion model, Exp. Therm. Fluid Sci. 21 (1-3) (2000) 179-186.
DOI
|
17 |
M. P. Sherman, et al. The behavior of hydrogen during accidents in light water reactors. reportNRC Report NUREG/CR-1561 (SAND-80-1495). Sandia National Laboratories, NTIS, (1980).
|
18 |
M. Berman, J.C. Cummings, The hydrogen problem in LWRs, Nucl. Saf. 25 (1984) 53-74.
|
19 |
W. Breitung, S.B. Dorofeev, Criteria for deflagration-to-detonation transition (DDT) in nuclear containment analysis. SMIRT-15 Post-Conference Seminar on Containment of Nuclear Reactor, 1999. Seoul, Korea.
|
20 |
H. Tadej, M.J. Komen, K. Ivo, Hydrogeneairesteam deflagration experiment simulated using different turbulent flame-speed closure models, J. Nucl. Eng. Radiat. Sci. 4 (2018).
|
21 |
A. Saghafian, et al., An efficient flamelet-based combustion model for compressible flows, Combust. Flame 162.3 (2015) 652-667.
DOI
|
22 |
J.R. Howell, et al., Thermal Radiation Heat Transfer, CRC press, 2020.
|
23 |
S.S. Sazhin, et al., The P-1 model for thermal radiation transfer: advantages and limitations, Fuel 75 (3) (1996) 289-294.
DOI
|
24 |
A. Vdovin, A.O. Gonzalez, Radiation Heat Transfer in OpenFOAM, 2009.
|