• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.487-490
• /
• 2002

In this paper, we report a novel way to evaluate the anticlinic interlayer coupling coefficient U between smectic layers of an antiferroelectric liquid crystal, by utilizing a small field-induced perturbation of the molecular orientation. U was found to exhibit an unusual "S-shaped" dependence on temperature, with values ranging between $0.4{\times}10^4$ and $0.4{\times}10^{-1}$ erg $cm^{-3}$ over a 10$^{\circ}C$ temperature range below smectic A-smectic $C_A$ phase transition temperature. The results are good agreement with estimates for U based upon the threshold field for the onset of solitary waves, and provide strong supporting the low-field regime for the single Fourier component model.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.49-52
• /
• 2005

In this study, abiotic transformation of 1-naphthol via oxidative-coupling reaction was evaluated using Mn oxide which is ubiquitous in natural soils. The transformation of 1-naphthol catalyzed by synthetic birnessite $({\delta}-MnO_2)$ followed pseudo-lst order reaction, and the rate constants was in the range of $0.053{\sim}0.13\;min^{-1}$ with birnessite loadings of $12.5{\sim}50\;mg/20\;mL$. Since the oxidation of 1-naphthol was occurred on the reactive surface of the oxide particles, the rate constants with various birnessite loadings were correlated with birnessite surface area concentration. The correlation showed a strong linearity, which confirms the supposition of the surface reaction. From the correlation, therefore, the surface area normalized rate constant, $k_{surf}$, was determined to be 0.032 $L/m^2\;min$.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.123-127
• /
• 2002

In order to set up the design rule of micro optical bench, optical coupling efficiencies of two sets of test benches are calculated. Simple linear connections of incoming and outgoing optical fibers with and without ball lenses are designed. Positional errors that are possible in actual fabrication processes are considered in the calculations and their tolerances are determined from 3dB conditions. For a simple fiber-to-fiber connection, the working distance is limited to $2.7\mu\textrm{m}$ and tilt error $5.8^{\circ}$. When ball lenses are located in front of each fiber, the working distance can be extended over $60\mu\textrm{m}$ , but the positional errors have the strong interaction among position parameters and thus should be considered simultaneously for tolerance design.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권1호
• /
• pp.6-10
• /
• 2013

We investigate the electrical and thermal transport properties of a sesquicarbide superconductor $La_2C_3$, including electrical resistivity, thermoelectric power, and thermal conductivity. The electrical resistivity exhibits a typical metallic character with a saturation behavior at high temperatures. The thermoelectric power shows a metallic behavior with pronounced phonon-drag effect, comparable with pure metals. The broad peak of the thermal conductivity is observed in the superconducting state, which is rapidly suppressed by magnetic fields. These observations suggest that the electron-phonon scattering is significant in $La_2C_3$, which is relevant with the relatively high-$T_c$ in $La_2C_3$ through strong electron-phonon coupling with low frequency phonon modes.

• 전산구조공학
• /
• 제4권4호
• /
• pp.97-106
• /
• 1991

주-부 구조물의 진동 특성을 파악하기 위한 새로운 방법인 frequency window method를 다중 지지되고 구조물간의 커플링이 강한 주-부 구조물을 해석하였다. 다항식의 합으로 표현된 특성 방정식과 이 식의 해는 기존의 고유치 해석 방법의 결과와는 다른 새로운 것으로 frequency window method의 주된 장점으로는 공진과 커플링 현상을 정량적으로 파악할 수 있는 피라미터의 정의, 전체 주-부 구조물의 모드특성을 나타내는 해석적인 식과 반복 기법의 도입으로 인한 해석 결과의 정확성등이 있다.

• Journal of Magnetics
• /
• 제15권1호
• /
• pp.17-20
• /
• 2010

The relationship between ferromagnet anisotropic magnetization and the antiferromagnet atomic spin configuration was investigated for various angles of the uniaxial deposition magnetic field of the FeMn layer in the Corning glass/Ta(5nm)/NiFe(7nm)/FeMn(25nm)/Ta(5nm) multilayer that was prepared by the ion beam sputter deposition. The exchange bias field ($H_{ex}$) obtained from the measurement of the easy-axis MR loop decreased to 40 Oe at the deposition field angle of $45^{\circ}$, and to 0 Oe at the angle of $90^{\circ}$. When the difference between the uniaxial axis between the ferromagnet NiFe and the antiferromagnet FeMn was $90^{\circ}$, the strong antiferromagnetic dipole moment of FeMn caused the weak ferromagnetic dipole moment of NiFe to rotate in the interface.

• 한국세라믹학회지
• /
• 제25권2호
• /
• pp.125-130
• /
• 1988

The characteristics of the PZT/PMM and PZT/Butadiene composites with 3 dimensional network structure have been investigated as a function of the PZT volume fraction. The dielectric constants of the PZT composites increased linearly as the PZT volume fraction increased. However, they are not significantly affected by the polymer compliance. The piezoelectric d33 coefficients of the PZT/Butadiene are largest than the PZT/PMM because of the high elastic compliance which promotes stress transfer. The values of the mechanical quality factor adn frequency factor of the PZT/PMM composite are slightly larger, while the planar coupling factor is smaller, than the PZT/Butadiene composite. These results are due to strong interaction and mechanical coupling between PZT and PMM.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.240-243
• /
• 2005

A design procedure using spatial Fourier transform is presented for a structural-acoustic coupled radiator that can emit sound in the desired direction with high power and low side lobe level. The design procedure consists of three steps. Firstly, the structural-acoustic coupled radiator is chosen to obtain strong coupling between structural vibration and acoustic pressure. The radiator is composed by two spaces which are separated by a wall. Spaces can be categorized as reverberant finite space and unbounded semi-infinite space, and the wall are composed of two plates and an opening. The velocities on the wall are predicted. Secondly, directivity and energy distribution of radiator are predicted in wave number domain using spatial Fourier transform. Finally, optimal design variables are calculated using a dual optimal algorithm. Its computational example is presented including the directivity and resulting pressure distribution using proposed procedure.

• Coupled systems mechanics
• /
• 제8권2호
• /
• pp.111-127
• /
• 2019

In this paper, we present a 2D multi-scale coupling computation procedure for localized failure. When modeling the behavior of a structure by a multi-scale method, the macro-scale is used to describe the homogenized response of the structure, and the micro-scale to describe the details of the behavior on the smaller scale of the material where some inelastic mechanisms, like damage or plasticity, can be defined. The micro-scale mesh is defined for each multi-scale element in a way to fit entirely inside it. The two scales are coupled by imposing the constraint on the displacement field over their interface. An embedded discontinuity is implemented in the macro-scale element to capture the softening behavior happening on the micro-scale. The computation is performed using the operator split solution procedure on both scales.

• International Journal of Computer Science & Network Security
• /
• 제23권1호
• /
• pp.120-124
• /
• 2023

Strong surface waves among collinearly arranged patch antenna arrays pose unwanted inter element coupling particularly when high permittivity dielectric materials are used. In order to avert those waves, a novel Defected Ground Structure (DGS) is carved out systematically between two E-plane patch antenna elements. The introduced low profile μ shaped structure consequently improves impedance bandwidth and reflection coefficient by suppressing surface waves considerably. Parametric simulation results are analyzed and discussed.