• Current Optics and Photonics
• /
• v.2 no.4
• /
• pp.348-355
• /
• 2018

How to measure the creepage distance of an insulator quickly and accurately is a problem for the power industry at present, and the noticeable concern is that the high voltage insulation equipment cannot be measured online in the charged state. In view of this situation, we develop an on-line measurement system of creepage distance for high voltage insulators based on binocular stereo vision. We have proposed a method of generating linear structured light using a conical off-axis mirror. The feasibility and effect of two ways to solve the interference problem of strong sunlight have been discussed, one way is to use bandpass filters to enhance the contrast ratio of linear structured light in the images, and the other way is to process the images with adaptive threshold segmentation and feature point extraction. After the system is calibrated, we tested the measurement error of the on-line measurement system with a composite insulator sample. Experimental results show that the maximum relative error is 1.45% and the average relative error is 0.69%, which satisfies the task requirement of not more than 5% of the maximum relative error.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.6
• /
• pp.587-591
• /
• 2005

Driving Waveform of AC PDP in reset periode is increased and decreased with constant slope to improve dark room contrast ratio and image quality. But the slope and magnitude of ramp waveform are related to strong and weak discharge with temperature change in AC PDP. So this paper proposes a methods of changing the slope and magnitude of ramp waveform during reset periode according to temperature change in AC PDP. Experimental variable factors ire chosen to setup slope, setdown slope, and -Vy voltage magnitude in Y sustain electrode. The proposed methods are expected to compensate for effect of the temperature change, causing misfiring in high and low temprature, with varing the slope and magnitude of ramp voltage during reset period and improve image quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1376-1380
• /
• 2007

The charged particle type display have characteristics of high contrast ratio and wide viewing angle, quick response time. We used the yellow(-) and the black(+) colored particles, which is respectively addressed to the cells of upper and rear panel by using electric field. Our independent addressing method has strong points compared to the mixed particle putting method. After addressing, we packaged two panels and did aging process, and then panel is driven by matrix method of four channel electrodes. Layers of particles are controlled by height of cell barriers and needed minimum two layers. When positive voltage is applied to the upper electrode, the yellow particles with negative charge move toward the upper substrate and the black particles with positive charge move toward opposite direction.

• Korea Trade Review
• /
• v.44 no.6
• /
• pp.217-230
• /
• 2019

This study investigates the impacts of international trade and foreign direct investment (FDI) on income distribution both nationally as well as provincially in Vietnam. This study uses panel data of 63 provinces in Vietnam for the period of 2008-2016 and a time series dataset from 1992 to 2016. We found the following results. First, the income distribution is significantly affected by per capita income. When we consider the Kuznets hypothesis, the intra-provincial income inequality of Vietnam's 63 provinces follows a regular U-shaped relationship. In contrast, the income distribution in Vietnam exhibits an inverted U-shaped relationship between the Gini coefficient and per capita income. Second, the inward FDI tends to reduce income gaps in each province through the employment of predominantly low-skilled workers. FDI, however, seems to increase income inequality throughout Vietnam. This result is potentially due to the strong concentration of FDI into a very few areas. Third, the effect of trade openness exhibits a decrease in inequality both within each province and in the whole country of Vietnam.

• Structural Engineering and Mechanics
• /
• v.80 no.6
• /
• pp.711-726
• /
• 2021

This paper presents a multiple parameters-based recursive methodology for the reliability quantification of civil structures subjected to meteorological disasters. Recognizing the challenge associated with characterizing at a single stroke all the meteorological disasters that may hit a structure during its service life, the proposed methodology by contrast features a multiparameter recursive mechanism to describe the meteorological demand of the structure. The benefit of the arrangements is that the essentially inevitable deviation of the practically observed meteorological data from those in the existing model can be mitigated in an adaptive manner. In particular, the implications of potential climate change to the relevant reliability of civil structures are allowed for. The application of the formulated methodology of recursive reliability quantification is illustrated by first considering the reliability quantification of a linear shear frame against simulated strong wind loads. A parametric study is engaged in this application to examine the effect of some hyperparameters in the configured hierarchical model. Further, the application is extended to a nonlinear hysteretic shear frame involving some field-observed cyclone data, and the incompleteness of the relevant structural diagnosis data that may arise in reality is taken into account. Also investigated is another application scenario where the reliability of a building envelope is assessed under hailstone impacts, and the emphasis is to demonstrate the recursive incorporation of newly obtained meteorological data.

• Journal of Wetlands Research
• /
• v.17 no.1
• /
• pp.19-25
• /
• 2015

The purpose of this study is to reveal the effect of plant life cycle to plant settlement by 1 year monitoring. The subjects of monitoring are the plants (3 plant life cycle, 9 taxa) well established in the mesocosm. 18 mesocosms were divided into 3 sets and water levels were maintained at 0, 20 and 60 cm during 16 weeks from mid-May, respectively and at 0 cm except these 16 weeks. Height and population size of transplanted perennial plants (Scirpus tabernaemontani, Zizania caduciflora, Typha (Typha angustifolia and Typha orientalis)) at 1st year were not affected by diverse water level, though any more seedlings of these species were not settled at this condition. In contrast, water level condition strong influenced annual and biennial plant, relatively. As a result, timing and duration of flooding have great effect on successful settlement of annual and biennial plant without rhizome.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.7
• /
• pp.2081-2085
• /
• 2014

Second-order rate constants ($k_N$) have been measured spectrophotometrically for the reactions of phenyl 2- pyridyl carbonate (6) with a series of cyclic secondary amines in MeCN at $25.0{\pm}0.1^{\circ}C$. The Br${\o}$nsted-type plot for the reaction of 6 is linear with ${\beta}_{nuc}$ = 0.54, which is typical for reactions reported previously to proceed through a concerted mechanism. Substrate 6 is over $10^3$ times more reactive than 2-pyridyl benzoate (5), although the reactions of 6 and 5 proceed through the same mechanism. A combination of steric hindrance, inductive effect and resonance contribution is responsible for the kinetic results. The reactions of 6 and 5 proceed through a cyclic transition state (TS) in which H-bonding interactions increase the nucleofugality of the leaving group (i.e., 2-pyridiniumoxide). The enhanced nucleofugality forces the reactions of 6 and 5 to proceed through a concerted mechanism. In contrast, the corresponding reaction of 4-nitrophenyl 2-pyridyl carbonate (7) proceeds through a stepwise mechanism with quantitative liberation of 4-nitrophenoxide ion as the leaving group, indicating that replacement of the 4-nitrophenoxy group in 7 by the PhO group in 6 changes the reaction mechanism (i.e., from a stepwise mechanism to a concerted pathway) as well as the leaving group (i.e., from 4-nitrophenoxide to 2-pyridiniumoxide). The strong electron-withdrawing ability of the 4-nitrophenoxy group in 7 inhibits formation of a H-bonded cyclic TS. The presence or absence of a H-bonded cyclic TS governs the reaction mechanism (i.e., a concerted or stepwise mechanism) as well as the leaving group (i.e., 2-pyridiniumoxide or 4-nitrophenoxide).

• KIEAE Journal
• /
• v.7 no.1
• /
• pp.65-72
• /
• 2007

As ecological design elements, daylighting can be applied to provide adequate illumination on visual tasks to create an attractive visual environment and to save electrical energy. Daylighting control systems reject direct sunlight and penetrate it onto the ceiling or to deep into the room. This study aims to evaluate the luminance environment of sloped light guide with automated venetian blind systems according to sun angle changes. For evaluation, a mock-up model was used and the south facing side-window mounted between the clerestory window and the view window. To assess luminance performance, 3 view points of luminance were monitored. As results, the conventional and lightshelves show ideal luminance ratio between workplane and surroundings(3:1) and workplane and darkness area(2:1) due to total ratio of surroundings and darkness area has lower ratio than workplane. Compared to the lightshelves window, conventional window shows unrelieved effect in between the workplane and brightness area(1:5). It means that there has low deviation according to the required standards. Also, compared to the ratio between the brightness area and darkness area(2~6:1) conventional window with high deviation(10~20:1) provide discomfort glare due to the excessively strong contrast, while lightshelves window shows a required luminance ratio that provide a three-dimensional effect to occupants. Therefore, luminance distribution indicate that application of a lightshelves and blinds not only has a significantly positive effect but also offers higher luminance quality in a daylit room

• Korean Journal of Remote Sensing
• /
• v.28 no.2
• /
• pp.203-214
• /
• 2012

The physical environment of urban areas covered mostly by concrete and asphalt is the main cause of the urban heat island effect, primarily becoming apparent through increased land surface temperature. This study examined the effect of different urban land cover types on the land surface temperature using MODIS, Landsat ETM+ and RapidEye satellite data. As a result, the remote sensing based land surface temperature showed a marked difference according to the land use pattern in the case study of Ilsan new city. The high-rise apartment residential districts with less building-to-land ratio and higher green area ratio revealed lower land surface temperature than the low-story single-family housing districts characterized by relatively high building-to-land ratio and low green area ratio. From the view of climate zone and land cover types, there is a strong linear correlation between the impervious land cover ratio and the land surface temperature; the land surface temperature increases as the impervious built-up areas expand. In contrast, vegetation;water and shadow areas affect the decrease of land surface temperature. There is also a negative (-) correlation between NDVI and land surface temperature but the seasonal variation of NDVI can be hardly corrected.

• Journal of Fashion Business
• /
• v.20 no.4
• /
• pp.50-71
• /
• 2016

This study analyzed the recognition rate of QR codes printed by digital transfer textile printing for mobile application. The purpose was to identify conditions that increase recognition rates of QR codes printed on textile, in order to increase utility of QR codes in the textile and fashion industries. The study focused on differences in the color of the QR codes and denier, which is a unit of textile fineness measurement, of the textile on which the QR codes were printed. And the recognition rates of QR codes according to the color and denier were analyzed. According to the result of this study, the colors of QR codes had an effect on the recognition of the codes by mobile applications. Specifically, strong contrast, i.e., bright background and relatively dark module, increased the recognition rate of the QR codes. Digital transfer textile printing tend to change the hue of red and yellow and increase brightness, and change in the printed colors also had an effect on the recognition rate of QR codes. There was a clear difference in the color and recognition rate of the printed QR code according to the denier of the textile, and this suggests denier has an effect on the recognition rate. The findings in this study can provide basic data for future research on QR codes digital printed on textile.