• 센서학회지
• /
• 제22권5호
• /
• pp.369-373
• /
• 2013

In this paper, we developed contact type temperature sensor with single crystal silicon strip thermopile. This sensor consists of 15 p-type single crystal silicon strips, 17 n-types and contact electrodes on silicon dioxide silicon membrane. The result of electromotive force measuring showed very good characteristic as $15.18mV/^{\circ}C$ when temperature difference between the two ends of the thermopile occurs by applying thermal contact on the thermopile which was fabricated with silicon strip of $200{\mu}m$ length, $20{\mu}m$ width, $1{\mu}m$ thickness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1209-1212
• /
• 1995

This paper presents a capacitive humidity sensor using porous silicon layers formed tom the anodization of p-type silicon in HF solution. The upper electrodes consist of many aluminum strips over porous silicon, between which the porous silicon is etched away. The sensor showed a good sensitivity(20pF/%RH) and lineaity in the range of 40%RH$\sim$80%RH, a hysteresis of ${\pm}2%$ RH, and a slow transient response. These preliminary resluts show that futher improvement can still be expected.

• 한국정보과학회논문지:시스템및이론
• /
• 제28권12호
• /
• pp.653-659
• /
• 2001

본 논문에서는 실린더 파노라믹 영상을 생성하기 위한 효율적인 알고리즘을 제시한다. 먼저 영상 정렬 시 실린더와 영상간의 관계를 이용한 영상의 중심으로부터 같은 거리에 있는 영상 스트립을 비교하는 효율적인 영상 정렬 알고리즘을 기술하고, 원과 원에 접하는 다각형간의 관계를 이용하여 이분법으로부터 초점거리를 정확하게 추정하는 방법을 설명한다. 본논문에서 제안하는 알고리즘은 카메라 운동에 대한 제약점은 있지만, 빠르고 간단하기 때문에 실제 응용에서 효과적으로 사용 가능하다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.379-383
• /
• 2005

This paper proposes a new steel strip surface inspection system. The system acquires bright and dark field images of defects by using a stroboscopic IR LED light and area camera system and the defect images are preprocessed and segmented in real time for feature extraction. 4113 defect samples of cold roll steel strips are used to develop KNN (k-Nearest Neighbor) classifier which classifies the defects into 8 different types. The developed KNN classifier demonstrates about 85% classifying performance which is considered very plausible result.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVII)
• /
• pp.159-162
• /
• 2005

In this paper, we report a novel technique for the manufacture of polymeric bar-coded strips having diverse characteristics such as sensing with biocatalysts using a microfluidic platform and 'on the fly' photopolymerization. This method is a very simple, cost-effective means for mass production, and diverse materials sensitive to hazardous environments such as enzymes, DNA, or antigens are expected to be immobilized stably, as the fabrication process does not need any hazardous environments. On the basis of this technology, we fabricated enzyme-immobilized barcoded strip for multiple bio-analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.171-171
• /
• 2000

We have developed m innovative surface inspection system for automated quality control for steel products in POSCO. We had ever installed the various kinds of surface inspection systems, such as a linear CCD and a laser typed surface inspection systems at cold rolled strips production lines. But, these systems cannot fulfill the sufficient detection and classification rate, and real time processing performance. In order to increase detection and classification rate, we have used the Dark, Bright and Transition Field illumination and area type CCD camera, and fur the real time image processing, parallel computing has been used. In this paper, we introduced the automatic surface inspection system and real time image processing technique using the Object Detection, Defect Detection, Classification algorithms and its performance obtained at the production line.

• 한국소음진동공학회논문집
• /
• 제13권2호
• /
• pp.83-91
• /
• 2003

Pantograph design Process must be considered in terms of stability of aerodynamics and reduction of aeroacoustics. Furthermore pantograph needs to be insensible to severe circumstance condition like typhoon, tunnel, a change of season. In this paper, robust design of panhead sections is conducted based on the Taguchi's design of experiment method. In the aeroacoustic noise analysis, an acoustic analogy using the Ffowcs Williams and Hawkings(FW-H) equation is used to calculate the flow induced sound pressure level in aeroacoustics. From the near-field CFD analysis data, the far-field noise is predicted at the positions of 25 m away from Pantograph. Based on aerodynamic(CFD) and aeroacoustic(FW-H) analysis data, the optimal sizing and Positioning of panhead elements are determined using robust design optimization method. Design parameters such as thickness, length and radius are controllable factors, while outdoor air temperature and atmospheric pressure are considered as uncontrollable factors in the context of Taguchi's approach. A number of CFD simulation and aeroacoustic analysis are performed based on orthogonal arrays. In this paper, two-step optimization method is used as a parameter design procedure. It is executed using signal to noise(S/N) ratio and analysis of means(ANOM) method. So Thus, an optimal level of design parameters Is extracted to minimize the disconnection ration between contact strips and catenary system, and reduce the far-field aeroacoustic noise.

• Restorative Dentistry and Endodontics
• /
• 제8권1호
• /
• pp.97-106
• /
• 1982

The purpose of this study was to evaluate the effect of different polishing procedures on the surfaces of composite resins. Two-paste type comosite restorative resin (Hipol) was selected for this study. 70 cavities prepared on the plaster-stone dies, 6mm in diameter and 2mm in depth, was filled with composite resin according to the manufacturer's specifications and by polymerizing against mylar strips. The polymerized composite resin specimens were polished (surface finished) by using 6 polishing devices; white stones, diamond finishing points, 12-fluted carbide finishing burs, green stones, sand paper disks, and Quasite rubber disk after polished with sand paper disks and green stones. A profilometer (Bendix type) was used to record in microinches the surface roughness of each surface finished composite resin specimens. The results were as follows. 1. The best finished surface that can be obtained is a surface formed by the mylar matrix strip 2. The white stones produced the smoothest surface in the experimental group. 3. The green stones produced the roughest surface in the experimental group. 4. It was proved that the gradual use of finishing instruments from a rough one to fine ones reduced the surface roughness.

• 자원환경지질
• /
• 제28권6호
• /
• pp.553-558
• /
• 1995

본 논문에서는 깊이에 따라 밀도값과 (종파)속도값이 변하는 지하 하부층들의 반사계수로부터 밀도와 속도 주상도를 구하는 알고리즘을 개발하고자 하였다 하향연속(下向連續) 혹은 박층(剝層 layer stripping) 방식 알고리즘은 적분방정식을 이용한 계산법보다 계산 과정을 상당히 줄일 수 있다. 본 논문에서는 여러 방향으로의 입사파에 의한 반사계수를 개선된 하향연속 알고리즘을 이용하여 처리하였으며, 각 깊이에서 최소자승 맞춤(fitting)을 실행하였다. 본 연구결과는 다른 하향연속 알고리즘에 비하여 상당한 성과를 보여주고 있다.

• 대한임베디드공학회논문지
• /
• 제15권4호
• /
• pp.167-175
• /
• 2020

A blood-glucose meter is one of the in vitro diagnostic devices to measure and control the glucose concentration of diabetics. In order to measure the glucose level in the blood, the common method is to measure the amount of electrons, that is, the output current generated by glucose oxidation after a blood sample is inserted into the test strip containing an enzyme. The hematocrit is an obstacle in measuring accurate blood glucose concentration. This paper deals with the design and implementation of a blood-glucose meter to correct the hematocrit interference. We propose a sequential method which measures impedance using the alternating current and then measures glucose in the blood using the direct current. In addition, this paper introduces how to use commercial glucose strips based on the proposed system. Finally, we conducted the performance evaluation of the proposed system by comparing the measured current and impedance with those of the references. As a result, the standard deviation of the current measurement is approximately 0.6nA and the impedance measurement error for measuring the hematocrit is approximately within 1%. The proposed system will improve the accuracy of the conventional blood-glucose meter by reducing the hematocrit interference.