본 논문에서는 접지된 유전체층 위의 저항띠 격자구조에 의한 TE (transverse electric)산란 문제를 전자파 수치해석 방법으로 알려진 PMM (point matching method)를 이용하여 해석하였다. 경계조건들은 미지의 계수를 구하기 위하여 이용하였고, 저항 경계조건은 저항띠 위의 접선성분의 자계와 표면전류밀도와의 관계를 위해 적용하였고, 저항띠에 유도되는 전류밀도는 저항띠 영역의 두 경계면에서 자계의 차이에 의해 계산하였다. 저항띠의 표면에 유도 전류 밀도는 자계의 두 경계면의 위와 아래 차이에 의해 계산하였다. 저항띠의 균일저항율, 폭과 주기, 유전층의 비유전율과 두께 및 입사각에 대해 정규화된 기하광학적 반사전력을 계산하였다. 수치결과들은 기존의 FGMM (fourier galerkin moment method)를 이용한 수치해석 결과들과 비교하여 매우 잘 일치하였다.
본 논문에서는 2중 유전체층 사이의 저항띠 격자구조에 의한 TE(transverse electric) 산란 문제는 전자파 수치해석 방법으로 알려진 PMM(point matching method)를 이용하여 해석하였다. 경계조건들은 미지의 계수를 구하기 위하여 이용하였고, 산란 전자계는 Floquet 모드 함수의 급수로 전개하였고, 저항띠의 해석을 위해 저항 경계조건을 적용하였다. 저항띠의 폭과 주기, 2중 유전층 사이의 비유전율, 두께, 입사각 및 균일저항율에 대해 정규화된 반사과 투과전력을 계산하였다. 전반적으로, 도체 스트립에 대한 반사 전력은 비유전율의 값이 증가함에 따라 증가하였고, 균일저항율을 갖는 저항띠에 대한 반사 전력은 저항율의 값이 증가함에 따라 감소하였다. 본 논문의 제안된 구조에 대한 수치결과들은 기존 논문의 수치해석 결과들과 비교하여 매우 잘 일치하였다.
The effect of plastic deformation in an interfacial crack is considered. Yield zones are assumed to have the form of a strip along the interface. The crack is subjected to mode III loads at infinity and lies along the interface of two semi-infinite planes with different material properties. The size of the yield zones, the relation between the size of the yield zone and CTOD are obtained in a closed form solution. The J integral also can be obtained in a closed form Solution.
Initiation and propagation of interfacial crack along bimaterial interface are considered in this study. A biaxial loading device for a single specimen is used for obtaining a wide range of mode-mixities. The specimen is an edge-cracked bimaterial strip of glass and epoxy; the biaxial loading device, being capable of controlling displacements in two perpendicular directions, is developed. A series of interfacial crack initiation and Propagation experiments are conducted using the biaxial loading device for various mixed modes. Normal crack opening displacement (NCOD) is measured near crack front by a crack opening interferometry and used for extracting fracture parameters. From mixed mode interfacial crack initiation experiments, large increase in toughness with shear components is observed. The behavior of interfacial crack propagation analyzed as a function of mode-mix shows that initial crack propagation is delayed with increase of mode-mixity, and its velocity is increased with positive mode-mixity but decreased with negative case. However, it is found that crack propagation is less accelerated with positive mode-mixity than the negative mode-mixity, which may be caused by contact and/or effects of friction between far field and near-tip Held along the interfacial crack.
금속선 도파로 면과 금속 평면이 수직으로 적층된 장거리 표면-플라즈몬 도파로 구조를 제안하였으며, 표면-플라즈몬 모드의 특성을 유전체의 굴절율과 두께 변화에 대하여 이론적으로 분석하고 실험적으로 검증하였다. 위층의 금속선 도파로를 S-곡선과 Y-분기 형태로 변형시킨 이중-금속 도파로를 제작하여, 제안된 이중-금속 도파로 구조의 광 소자 응용 가능성을 살펴보았다. 제안된 이중금속 구조에서는 도파로 코어에 해당하는 두 금속 박막 사이의 유전체 굴절률을 임의로 선택하여도 장거리 표면 플라즈몬 모드가 존재할 수 있으며, 표면-플라즈몬 모드의 전파거리는 두 금속 박막 사이의 유전체 두께를 조절함으로써 증가시킬 수 있다. 또한, 이중-금속 도파로는 표면-플라즈몬을 전달할 뿐만 아니라, 삽입된 코어 유전체에 전압 및 전류를 인가하기에도 매우 적합한 구조로서, 표면-플라즈몬 능동소자 및 비선형 소자 구현에 많은 가능성을 열어줄 것으로 기대된다.
In this work was produced and analyzed a z-cut Ti:LiNbO$_{3}$ optical waveguide which applies for various optical devices.A waveguide channel with a thickness 8 .mu.m and a length 66,000.mu.m and a mach-zehnder interferometer type waveguide were fabricated at a diffusion temperature 1050.deg. C for 6-8hours in a wet $O_{2}$ environment. The resulting Ti:LiNbO$_{3}$ optical waveguide was measured to have a Ti-strip thickness of 950.angs. and low loss. Surfaces and cross-sections of a fabricated waveguide were analysed. The mode pattern anaysis revealed that the waveguide showed a single mode at a 1550nm wavelength. The effective dimension of the waveguide was calculated by measuring a gaussian profile; Wx=10.95.mu. and Wy=9.14.mu.m. a propagation loss, of 0.50dB/cm for a TM mode and 0.45dB/cm for a TE mode, was low enough to be accepatable for optical devices.
본 논문은 구형 마이크로스트립 안테나의 H-plane 상호결합에 관한 연구이다. 두 안테나의 상호결합을 계산하기 위해서 단일 마이크로스트립 패치의 교사저항을 구하였으며 결합된 전송선로를 even mode와 add mode로 분발하여 각 mode의 특성저항와 실효 유전률을 계산하였다. 이로부터 자계적으로 결합된 안테나를 S-band 주파수에서 S-parameter를 구한 결과 이론치와 실험치가 거의 일치함을 확인할 수 있었다.
본 논문에서는 접지평면위에 2개의 유전체 층을 가지는 저항띠 격자구조에서의 전자파 산란 문제를 수치해석 방법으로 잘 알려진 PMM 방법을 적용하여 저항띠의 저항을, 유전체층의 비유전율 및 두께, 입사각에 따라 수치해석하였다. 산란 전자계는 Floquet 모드 함수의 급수로 전개하였다. 경계조건은 미지의 계수를 구하기 위하여 적용하였고, 저항띠의 경계조건은 접선성분의 전계와 스트립 위의 전류와의 관계를 위해 적용하였다. 유전체층의 비유전율 및 두께가 커질수록 정규화된 반사전력이 커짐을 알 수 있었고, 스트립 폭의 값이 왼쪽에서 오른쪽으로 가면서 큰 값으로 이동하였다. 그리고 본 논문의 저항율이 영일 때 기존의 논문과 비교하여 매우 일치하였으며, 급변점에서의 대부분의 에너지는 입사각 이외의 다른 방향으로 산란된다.
본 논문에서는 박판구조물의 좌굴모드 및 좌굴응력값을 구하기 위해서 spline finite strip method를 이용하여 박판구조물이 흔히 좌굴을 일으키기 전에 다양한 초기부정형으로 인하여 발생할 수 있는 전좌굴변형 및 비선형 응력-변형률 관계를 포함한 비선형 비탄성 좌굴해석프로그램을 개발하였다. 이 방법은 다양한 지점조건과 임의의 하중조건을 가지는 박판구조물에 적용이 가능하며, 초기부정형과 잔류응력을 포함하고 있는 다양한 형태의 박판구조물의 비선형 좌굴거동을 보다 정확하게 예측할 수가 있었다.
In this study, the tests were performed on a series of reinforced concrete strip specimens to investigate a cracking behavior of reinforced concrete voided slab bridge. Also, the mid-span deflections, the crack widths and failure mode of reinforced concrete strip specimens were studied. It was found that serviceability of cracking and deflection at reinforced concrete voided slab bridge which were constructed and designed under verifying serviceability as design criteria are lower than common reinforced concrete member. On the basis of the experimental results, it is more reasonable concrete to evaluate crack occurring $f_r=2.0\surd{f_{ck}}$ rather than modulus of rupture of concrete, $f_r=0.8\surd{f_{ck}}$
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.