• 대한기계학회논문집
• /
• 제13권4호
• /
• pp.660-669
• /
• 1989

본 논문에서는 쐐기형 다이를 이용한 판재의 인발에 대한 슬립라인장에서 스트레인을 구하는 방법을 제시하고 이로부터 가공중에 생길 수 있는 역학적 문제의 공학적 해석을 얻고자 한다.

• Geomechanics and Engineering
• /
• 제38권3호
• /
• pp.261-273
• /
• 2024

This study presents a groundbreaking analytical approach to find an exact solution for the bearing capacity of strip footings on reinforced slopes, utilizing the two-phase approach and slip line method. The two-phase approach is considered as a generalized homogenization technique. The slip line method is leveraged to derive the stress field as a lower bound solution and the velocity field as an upper bound solution, thereby facilitating the attainment of an exact solution. The key finding points out the variation of the bearing capacity factor N_γ with influencing factors including the backfill soil friction angle, the footing setback distance from the slope crest edge, slope angle, strength, and volumetric fraction of inclusion layers. The results are evaluated by comparing them with those of relevant studies in the literature considering analytical and experimental studies. Through the application of the two-phase approach, it becomes feasible to determine the tensile loads mobilized along the inclusion layers associated with the failure zone. It is attempted to demonstrate the results by utilizing non-dimensional graphs to clearly illustrate variable impacts on reinforced soil stability. This research contributes significantly to advancing geotechnical engineering practices, specifically in the realm of static design considerations for reinforced soil structures.

• Progress in Superconductivity
• /
• 제14권2호
• /
• pp.96-98
• /
• 2012

Bias current dependence of a superconducting strip photon detector is studied in the wavelength range of 405 to 1310 nm. The detector is made of an $MgB_2$ meander pattern with the line width of 135 nm and thickness of 10 nm. At 1310 nm, the detection efficiency exponentially decreases as the bias current decreases. While at 405 nm, the detection efficiency almost saturates in the high bias current region. These features suggest that the intrinsic detection efficiency of the $MgB_2$ detector is high at 405 nm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.53.4-53
• /
• 2001

This paper described about the system which can be inspect work roll surface for deciding a milling schedule and roll changing at hot strip mill in POSCO. Developed system consists of CCD camera, Xenon lamp with fiber bundle and mechanical control part. The water probe build up water pole between head of probe and roll surface to acquisite a good image from a work roll surface under the bad environment with steam, cooling water and high temperature. This system is possible to monitor a work roll surface of about 12${\times}$9mm. We have shown the validation of the developed system which can monitor the evolution of degradation on work roll surface.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권10호
• /
• pp.539-545
• /
• 2004

In this paper, we consider the problem of capacitance matrix calculation for strip-line and other interconnects crossings. The problem is formulated in the spectral domain using the method of moments. Sinc-functions are employed as basis functions. Conventionally, such a formulation leads to a large, non-sparse system of linear equations in which the calculation of each of the coefficient requires the evaluation of a Fourier-Bessel integral. Such calculations are computationally very intensive. In the method proposed here, we provide simplified expressions for the coefficients in the moment method matrix. Using these simplified expressions, the coefficients can be calculated very efficiently. This leads to a fast evaluation of the capacitance matrix of the structure. Computer simulations are provided illustrating the validity of the method proposed.

• 한국세라믹학회지
• /
• 제40권4호
• /
• pp.375-379
• /
• 2003

In this paper, a novel design of multilayer ceramic-based Transmit/Receive (T/R) switch using Low Temperature Co-fired Ceramic (LTCC) technology have been presented. Compact T/R switch has been designed by transforming quarter-wave transmission line to its lumped equivalent circuit. Especially, high-Q three dimensional inductors with double strip have been proposed and incorporated. The proposed inductor has been modeled by multi-conductor coupled lines. A measured inductor quality factor (Q) of 80 and a Self-Resonance Frequency (SRF) of 6.6 GHz have been demonstrated. The inductor library has been incorporated into the design of WCDMA T/R switch.

• 한국통신학회논문지
• /
• 제11권6호
• /
• pp.388-395
• /
• 1986

Spectral domain에서 hybrid mode 분석과 Galerkin method를 사용하여 차폐된 단일, 결합 및 edge-offset 마이크로 스트립 구조의 분산특성을 고찰하였다. 진행방향의 스트립 전류에 대한 새로운 2개의 basis function이 제안되었으며 그들을 사용한 수치해의 수렵속도를 비교하였다. 결합 마이크로 스트립의 전류분포는 단일 마이크로 스트입의 전류분포로부터 Fourier변환의 shift theorem을 이용하여 얻었으며 off-centered 스트립의 분산에 대한 영향이 논의되었다. 수치 결과들은 여러가지 구조 parameter 들을 포함하여 다른 유용한 data 들과 비교한 결과 잘 일치함을 알 수 있었다.

• 대한전자공학회논문지
• /
• 제13권1호
• /
• pp.31-34
• /
• 1976

본 논문에서는 특성임피이던스가 선형적으로 변화하는 불균일박송선로의 특성, 특히 임피이던스정합특성을 해석하고 아울러 특성임피이던스 및 스트립의 폭이 선형적으로 변화하는 하는 불균일 마이크로스트립의 정합특성을 실험적으로 고찰하였다. In this paper, the characteristics, especially impedance matching behavior of linearly tapered transmission line which impedance is varied linearly is analyzed. Also impedance matching of nonuniform microstrip which characteristic impedance or width of strip is varied linearly are experimentally investigated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1416-1417
• /
• 2008

External electromagnetic penetration occurs hazard effects on electronic and electrical systems. complementary full wave analysis method need much of analysis time, memory. But BLT method need less time, memory. BLT method need to decouple the system into each volumes and surfaces for setting tubes and junctions. When 1 V/m impulsive EMP noise penetrates into PCB strip line(w=2mm, L=6cm), ringing wave appears at each loads attached in strip-line. Its frequency is 91.8MHz.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.265-269
• /
• 1996

In this paper, electric field interference was analyzed in the Printed Circuit Board to restrain the elcctromagnetic wave using Boundary Element Method and Finite Element Method. First, charge density distribution was simulated using Boundary Element Method and the characteristic impedance was caculated to restrain the reflex wave, and mutual capacitance was caculated in the multi-strip line PCB. Finally, electric field was simulated in the variable patterns using Finite Element Method. As a result, the optimal structure and characteristics of strip line was obtained and the imformations about the optimal design pattern could be obtained with the analysing the feild distribution.