• Journal of Microbiology and Biotechnology
• /
• v.26 no.6
• /
• pp.1018-1025
• /
• 2016

Probiotics are considered as the best effective alternatives to antibiotics. The aim of this study was to characterize the probiotic potential of lactobacilli for use in swine farming by using in vitro evaluation methods. A total of 106 lactic acid bacterial isolates, originating from porcine feces, were first screened for the capacity to survive stresses considered important for putative probiotic strains. Sixteen isolates showed notable acid and bile resistance, antibacterial activity, and adherence to intestinal porcine epithelial cells (IPEC-1). One isolate, LR1, identified as Lactobacillus reuteri, was selected for extensive study of its probiotic and functional properties in IPEC-1 cell models. L. reuteri LR1 exhibited good adhesion to IPEC-1 cells and could inhibit the adhesion of enterotoxigenic Escherichia coli (ETEC) to IPEC-1 cells. L. reuteri LR1 could also modulate transcript and protein expression of cytokines involved in inflammation in IPEC-1 cells; the Lactobacillus strain inhibited the ETEC-induced expression of proinflammatory transcripts (IL-6 and TNF-α) and protein (IL-6), and increased the level of anti-inflammatory cytokine (IL-10). Measurement of the permeation of FD-4 showed that L. reuteri LR1 could maintain barrier integrity in monolayer IPEC-1 cells exposed to ETEC. Immunolocalization experiments showed L. reuteri LR1 could also prevent ETEC-induced tight junction ZO-1 disruption. Together, these results indicate that L. reuteri LR1 exhibits desirable probiotic properties and could be a potential probiotic for use in swine production.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.3
• /
• pp.25-36
• /
• 2016

As the first public park in Korea, birth place of the march first independence movement, and a representative space of leisure of old men, Tapgol Park contains diverse symbolisms and meanings. In 2000, Seoul authorities selected the symbolism of the March First independence movement, and carried forward the sacralization project of Tapgol Park. They eliminated facilities, including vending machines, and restricted most of the leisure activities in the park such as drinking singing dancing, speech, playing chess, writing calligraphy, etc., and loitering. Also, they changed the park's design into a less available space with green areas and switched wooden benches to granite stone. Since the project finished, a representative phenomenon was the elderly men's exodus to Jongmyo Park, where the restrictions were not strong as in Tapgol Park. As a result, the numbers of users in Tapgol Park decreased sharply. However, overcrowded(more than 3000) Jongmyo Park is also in the middle of a sacralization project now. According to an investigation including observation and in-depth interview, most of the elderly men who use the parks almost everyday were in the low economic class. They just visit the parks everyday and chat with their peers, gaining comfort from each other. These phenomena can be interpreted as a social exclusion in society, which made the elderly men move to another place. Meanwhile, although fifteen years has passed since the project was completed, many people still regard the Tapgol Park as a place for elderly men instead of the birth place of the March First Independence Movement. This study focused on such problems and vague place identity, which is neither a memorial place nor a public park. The study discovery the fact they missed the symbolism that Tapgol Park was the first urban park of Korea. Also, it stresses that the monumentality does not need to be sacred, reverent, or inflexible. With this point of view, this study discussed public aspect and everydayness, which are included in most of the urban parks. Finally, this study suggests Tapgol Park as an urban park that has an identity that embraces the condition of monumentality, everydayness, and publicness all together.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.154-162
• /
• 2016

The aim of this study was to develop a transgenic petunia with enhanced resistance to sulfur dioxide ($SO_2$) gas by stacking two genes, SOD2 and NDPK2, which are both known to confer resistance to abiotic stresses. The first-generation hybrids ($TF_1$) were obtained through reciprocal crosses between an SOD2-transgenic line SOD2-2-1-1-35($T_4$)[S($T_4$)] and an NDPK2-transgenic line NDPK2-7-1($T_2$)[N7-1($T_2$)]. Approximately 32.1-73.0% of the first-generation hybrids ($TF_1$) carried both SOD2 and NDPK2 genes. These hybrids showed 2.6 and 5.1 times less damage than hybrids carrying only SOD2 or NDPK2 genes, respectively, when they were treated with $SO_2$ gas at 30 ppm. This confirmed that the heterozygous hybrids were more resistant to $SO_2$ than the hybrids carrying either one of the resistance genes. Second-generation hybrids ($TF_2$) were obtained by selfing the $TF_1$ individuals. We confirmed the expression of the stacked genes in the $TF_2$ hybrids by phenotypic observation of their response to $SO_2$ gas at 30 ppm as well as using RT-qPCR and photosynthetic efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.1-7
• /
• 2017

Cobalt silicide was used as a counter electrode in order to confirm its reliability in dye-sensitized solar cell (DSSC) devices. 100 nm-Co/300 nm-Si/quartz was formed by an evaporator and cobalt silicide was formed by vacuum heat treatment at $700^{\circ}C$ for 60 min to form approximately 350 nm-CoSi. This process was followed by etching in $80^{\circ}C$-30% $H_2SO_4$ to remove the cobalt residue on the cobalt silicide surface. Also, for the comparison against Pt, we prepared a 100 nm-Pt/glass counter electrode. Cobalt silicide was used for the counter electrode in order to confirm its reliability in DSSC devices and maintained for 0, 168, 336, 504, 672, and 840 hours at $80^{\circ}C$. The photovoltaic properties of the DSSCs employing cobalt silicide were confirmed by using a simulator and potentiostat. Cyclic-voltammetry, field emission scanning electron microscopy, focused ion beam scanning electron microscopy, and energy dispersive spectrometry analyses were used to confirm the catalytic activity, microstructure, and composition, respectively. The energy conversion efficiency (ECE) as a function of time and ECE of the DSSC with Pt and CoSi counter electrodes were maintained for 504 hours. However, after 672 hours, the ECEs decreased to a half of their initial values. The results of the catalytic activity analysis showed that the catalytic activities of the Pt and CoSi counter electrodes decreased to 64% and 57% of their initial values, respectively(after 840 hours). The microstructure analysis showed that the CoSi layer improved the durability in the electrolyte, but because the stress concentrates on the contact surface between the lower quartz substrate and the CoSi layer, cracks are formed locally and flaking occurs. Thus, deterioration occurs due to the residual stress built up during the silicidation of the CoSi counter electrode, so it is necessary to take measures against these residual stresses, in order to ensure the reliability of the electrode.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.324-332
• /
• 2009

The purpose of this study was to investigate the effect of rigidity of post core systems on stress distribution by the theoretical technique, finite element stress-analysis method. Three-dimensional finite element models simulating an endodontically treated maxillary central incisor restored with a zirconia ceramic crown were prepared and 1.5 mm ferrule height was provided. Each model contained cortical bone, trabecular bone, periodontal ligament, 4 mm apical root canal filling, and post-and-core. Six combinations of three parallel type post (zirconia ceramic, glass fiber, and stainless steel) and two core (Paracore and Tetric ceram) materials were evaluated, respectively. A 50 N static occlusal load was applied to the palatal surface of the crown with a $60^{\circ}$angle to the long axis of the tooth. The differences in stress transfer characteristics of the models were analyzed. von Mises stresses were chosen for presentation of results and maximum displacement and hydrostatic pressure were also calculated. An increase of the elastic modulus of the post material increased the stress, but shifted the maximum stress location from the dentin surface to the post material. Buccal side of cervical region (junction of core and crown) of the glass fiber post restored tooth was subjected to the highest stress concentration. Maximum von Mises stress in the remaining radicular tooth structure for low elastic modulus resin core (29.21 MPa) was slightly higher than that for high elastic modulus resin core (29.14 MPa) in case of glass fiber post. Maximum displacement of glass fiber post restored tooth was higher than that of zirconia ceramic or stainless steel post restored tooth.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.324-327
• /
• 2008

'Onnuri' is a japonica rice cultivar developed from the cross between 'Milyang 165' and HR14732-B-67-2-3 at Honam Agricultural Research Institute (HARI), NICS, RDA, in 2005. This cultivar has a short grain shape and about 121 days growth duration from transplanting to harvesting in Korean climate condition. In reaction to biotic and abiotic stresses, it shows resistance to blast, bacterial blight pathogen from $K_1$ to $K_3$ and stripe virus, but susceptible to other major diseases and insect pests. The milled kernel of 'Onnuri' is translucent with non-glutinous endosperm. It has about 18.6% of amylose content and better palatability of cooked rice compared with 'Chucheongbyeo' cultivated in Kyunggi province. The milled rice yield of 'Onnuri' is about 5.94 MT/ha under the standard fertilizer level of the ordinary transplanting cultivation. 'Onnuri' would be adaptable to southern plain of Cheonan, middle-northern plain, and southern mid-mountainous of Korea.

• Korean Journal of Breeding Science
• /
• v.43 no.6
• /
• pp.549-553
• /
• 2011

'Jungmo 1012', a new japonica rice intermediate parent developed from a cross between 'Sambaegbyeo' having a good eating-quality and lodging resistance, and 'Ou329', was developed by the rice breeding team of Sangju Substation, National Institute of Crop Science, Rural Development Administration in 2010. This variety has about 120 days growth duration from transplanting to harvesting in southern mid-mountainous area of Korea. It has 78 cm culm length and tolerance to lodging. In reaction to biotic and abiotic stresses, it shows strong resistance to blast and viviparous germination, but is susceptible to bacterial blight, virus diseases, and insect pests. The milled rice of 'Jungmo 1012' exhibit translucent, relatively clear non-glutinous endosperm and medium short grain. It has a little lower amylose content of 18.2%, and higher protein content of 6.3%, and good palatability of cooked rice compared with 'Odaebyeo'. The milled rice yield performance of this variety is about 5.55 MT/ha in local adaptability test for three years. 'Jungmo 1012' will be adaptable to southern mid-mountainous of South Korea.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.352-355
• /
• 2008

"Unmi" is a new japonica rice variety developed by the rice breeding team of Honam Agricultural Research Institute, NICS, RDA in 2007. This variety was developed from a across between Samcheonbyeo with lodging and cold tolerance and HR17870 derived from the cross of Iksan435 (Sobibyeo) and Sangju17 with resistance to diseases and good quality. This variety has about 110 days of growth duration from transplanting to harvesting in northern plain, northern and southern mid-mountainous areas of South Korea. It is about 68 cm in culm length and tolerant to lodging. In reaction to biotic and abiotic stresses, it shows moderate resistance to blast, and to bacterial blight pathogen races from $K_1$ to $K_3$, but susceptible to other major diseases and insect pests. The milled rice of "Unmi" is translucent and has relatively clear non-glutinous endosperm and medium short grain. It has about 17.3% amylose content and 6.3% of protein and similar palatability of cooked rice compared with Odaebyeo. The milled rice yield performance of this variety is about 5.16 MT/ha under the standard fertilizer level of the ordinary transplanting cultivation. "Unmi" would be adaptable for ordinary transplanting in the northern plain, northern and southern mid-mountainous area of South Korea.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.314-318
• /
• 2009

A new rice cultivar "Jinbaek" carrying Xa3 and xa5 was derived from the cross between 'HR15204-38-3' with xa5 gene resistant to bacterial blight K1, K2, K3 and K3a, and F1 plant derived from the cross between Junam and Sindongjin with Xa3 gene. "Jinbaek" has approximately 125 days of growth duration from transplanting to harvesting in the west-southern coastal and Honam plain of Korea. Culm length of "Jinbaek" is 71 cm. In reaction to biotic stresses, it shows moderate resistance to blast, and wide spectrum resistance to bacterial blight pathogen, K1, K2, K3, and K3a but susceptible to rice stripe virus and blast. The milled rice of "Jinbaek" exhibits translucent, relatively clear non-glutinous endosperm and midium short grain. It has lower amylose content (18.8%) and protein content (6.2%) compared with Nampyeong. The milled rice yield of this cultivar was 5.30 MT/ha in local adaptability test of three years from 2006 to 2008. This cultivar would be adaptable to the bacterial blight-prone area in the south-western coast and Honam plain of Korea.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.333-337
• /
• 2009

A new malting barley variety, "Daho", was developed from the cross between "Milyang85 and Suwon335" at the Department of Rice and Winter Cereal Crop (DRWCC) NICS, in 2007. An elite line, YMB2064-B-8-2-4-1-1, was selected in 2004 and designated as "Milyang134". It showed good agronomic performance in the regional adaptation yield trials (RYT) from 2005 to 2007 and was released with the name of "Daho", having high yielding and BaYMV resistance. The average heading and maturing dates of "Daho" were April 19 and May 27, which were 2 days later and 1 day earlier than those of "Jinyang", leading variety, at the regional adaptation yield trials (RYT), respectively. "Daho" had longer culm length (84 cm), more spikes per $m^2$ (915) and higher 1,000 grain weight (39.2 g) than those of "Jinyang" in paddy field condition. "Daho" was showed resistance to BaYMV at the regions of Naju, Jinju, and Milyang but moderately resistance at Iksan. However, the response of "Daho" to other environmental stresses was similar to "Jinyang". The yields of "Daho" at upland and paddy fields were about 5.20 MT/ha, 4.81 MT/ha, respectively, which is about 38%, 25% higher than those of "Jinyang" in the regional adaptation yield trials (RYT), respectively. It has higher grain assortment, germination capacity, water sensitivity and Kolback index but lower malt extract, diastatic power and filtration speed than those of "Jinyang".