• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.501-506
• /
• 1998

This paper is an experimental study on the flexural strength and ductility capacity of reinforced high performance concrete beams with the concrete which has compressive strength of 600~700kg/$\textrm{cm}^2$, slump value of 20~25cm and slump-flow value of 60~70cm. Total 8 beams with different tensile reinforcement ratio and pattern of loading were tested. Form the results of reinforced high performance concrete beams, the equivalent stress block parameters proposed by MacGregor et al. or New Zealand code are recommended to use. Also, an extreme fiber concrete compressive strain of reinforced high performance concrete beams are distributed 0.0033~0.0048. In reinforced high performance concrete beams, reinforcement ratio in order to insure curvature ductility index 2 and 4 propose by ACI code should be less than those of reinforced normal strength concrete beams.

• 한국농공학회논문집
• /
• 제56권5호
• /
• pp.45-54
• /
• 2014

This study was performed to evaluate compressive strength, flexural strength, static modulus of elasticity, stress-strain ratio and durability of abrasion on EVA concrete reinforced steel fiber (SF) in order to use hydraulic structures, underground utilities, offshore structures and structures being applied soil contaminated area. It is used ordinary portland cement, crushed coarse aggregate, nature fine aggregate, EVA redispersible polymer powder, superplasticizer and deforming agent to find optimum mix design of EVA concrete reinforced steel fiber. EVA concrete reinforced SF was effected on the improvement of mechanical properties and durability of abrasion.

• Advances in nano research
• /
• 제15권2호
• /
• pp.165-174
• /
• 2023

The study investigated the effect of geometric structures of nano-patterned surfaces, such as peak sharpness, height, width, aspect ratio, and spacing, on mechano-bactericidal properties. Here, in silico models were developed to explain surface interactions with Escherichia coli. Numerical solutions were performed based on the finite element method and verified by the artificial neural network method. An E. coli cell adhered to the nano surface formed elastic and creep deformation models, and the cells' maximum deformation, maximum stress, and maximum strain were calculated. The results determined that the increase in peak sharpness, aspect ratio, and spacing values increased the maximum deformation, maximum stress, and maximum strain on E. coli cell. In addition, the results showed that FEM and ANN methods were in good agreement with each other. This study proved that the geometrical structures of nano-patterned surfaces have an important role in the mechano-bactericidal effect.

• 농업과학연구
• /
• 제14권2호
• /
• pp.329-344
• /
• 1987

과압밀비(過壓密比)와 전단속도(剪斷速度) 및 다짐율(率)이 점성토(粘性土)의 응력변형특성(應力變形特性)에 미치는 영향(影響)을 검토(檢討)하기 위해서 반부극하(反復戟荷)에 의(依)한 삼축압축시험(三軸壓縮試驗)을 한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 반부재하(反復載荷)를 했을 때 같은 변형(變形)에서 축차응력의 차(差)는 큰 변형(變形)에서 반부재하(反復載荷)했을 때 더욱 크게 나타났고 공극수압(空隙水壓)은 제하시(除荷時)에는 감소(減少)하다가 다시 증가(增加)하며 재재하(再載荷)되면서 급격히 증가하는 현상(現象)을 나타냈다. 2. 과압밀비(過壓密比)가 클수록 변형(變形)의 증가(增加)에 따라 회복되는 탄성변형률은 감소(減少)하였으며 제일재하계수(除一載荷係數)는 과압밀비가 증가(增加)할수록 감소(減少)하였다. 3. 전단속도(剪斷速度)가 증가(增加)함에 따라 탄성변형율(彈性變形率)은 증가(增加)하였고 변형(變形)의 증가(增加)에 따라 탄성변형율(彈性變形率)은 감소(減少)하였다. 제일재하계수(除一載荷係數)는 변형(變形)이 증가(增加)함에 따라 감소(減少)하였고 전단속도(剪斷速度)가 빠른 경우에 큰 값을 나타냈다. 4. 회복되는 탄성변형율(彈性變形率)은 다짐율이 증가(增加)함에 따라 크게 나타났고 또 변형(變形)이 증가(增加)함에 따라 탄성변형율(彈性變形率)은 약간 감소(減少)하는 경향(傾向)을 나타냈다. 제일재하계수(除一載荷係數)는 다짐율(率)의 증가(增加)에 따라 뚜렷한 경향(傾向)은 보이지 않았으나 일반적(一般的)으로 변형(變形)이 증가(增加)함에 따라 감소(減少)하는 경향(傾向)을 나타냈다.

• 콘크리트학회논문집
• /
• 제20권2호
• /
• pp.221-229
• /
• 2008

와이어로프와 T형 강판을 이용한 개선된 비부착형 기둥보강 공법이 개발되었다. 제시된 절차에 따라 보강된 기둥 8개와 동일한 조건의 무보강 기둥 1개가 중심 축하중 하에서 실험되었다. 주요 변수는 와이어로프 체적비와 T 강판의 플랜지 폭 및 배치 형상이다. 실험된 기둥의 축하중 내력과 연성비는 각각 ACI 318-05의 예측값과 Chung et al.에 의해 수행된 일반 띠기둥의 실험 결과와 비교되었다. 게다가 와이어로프와 T 강판으로 구속된 콘크리트의 응력-변형률 관계를 평가하기 위한 모델이 제시되었다. 실험 결과로부터 기둥의 축하중 내력과 연성은 와이어로프의 체적비와 T 강판의 플랜지 폭의 증가와 함께 증가하였다. 특히 동일 횡보강근 지수에서 와이어로프 체적비가 0.0039 이상일 때 보강된 기둥의 연성비는 띠철근 기둥에 비해 현저히 높았다. 개발된 보강기술에 의해 구속된 콘크리트의 응력-변형률 관계 모델이 제시되었다. 예측된 응력-변형률 관계는 실험 결과와 잘 일치하였다.

• Structural Engineering and Mechanics
• /
• 제19권2호
• /
• pp.185-198
• /
• 2005

In the design of reinforced concrete beams, it is a standard practice to use the yield stress of the steel reinforcement for the evaluation of the flexural strength. However, because of strain hardening, the tensile strength of the steel reinforcement is often substantially higher than the yield stress. Thus, it is a common belief that the actual flexural strength should be higher than the theoretical flexural strength evaluated with strain hardening ignored. The possible increase in flexural strength due to strain hardening is a two-edge sword. In some cases, it may be treated as strength reserve contributing to extra safety. In other cases, it could lead to greater shear demand causing brittle shear failure of the beam or unexpected greater capacity of the beam causing violation of the strong column-weak beam design philosophy. Strain hardening may also have certain effect on the flexural ductility. In this paper, the effects of strain hardening on the post-peak flexural behaviour, particularly the flexural strength and ductility, of reinforced normal- and high-strength concrete beams are studied. The results reveal that the effects of strain hardening could be quite significant when the tension steel ratio is relatively small.

• Structural Engineering and Mechanics
• /
• 제48권2호
• /
• pp.195-205
• /
• 2013

The buckling problem of linearly tapered micro-columns is investigated on the basis of modified strain gradient elasticity theory. Bernoulli-Euler beam theory is used to model the non-uniform micro column. Rayleigh-Ritz solution method is utilized to obtain the critical buckling loads of the tapered cantilever micro-columns for different taper ratios. Some comparative results for the cases of rectangular and circular cross-sections are presented in graphical and tabular form to show the differences between the results obtained by modified strain gradient elasticity theory and those achieved by modified couple stress and classical theories. From the results, it is observed that the differences between critical buckling loads achieved by classical and those predicted by non-classical theories are considerable for smaller values of the ratio of the micro-column thickness (or diameter) at its bottom end to the additional material length scale parameters and the differences also increase due to increasing of the taper ratio.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.700-705
• /
• 2005

This study presents a fatigue line with a plastic rotational angle to a great extent of plastic strain of Low-Cycle-fatigue period, such as earthquake, etc. This fatigue line with a plastic rotational angle is measured and analysed more simply in practice rather than Woehler's fatigue line which is developed in stress variation of the structure. It shows that the slope of fatigue line with a plastic rotational angle is equal to that with plastic strain through the experiments by proving the correlation that the plastic strain ratio is directly proportional to the plastic rotational angle in plastic hinge.

• Toxicological Research
• /
• 제31권4호
• /
• pp.415-420
• /
• 2015

The purpose of the present study is to investigate the correlations between food intake behavior and job stress level and neuropeptide hormone concentrations. Job strain and food intake behavior were first identified using a self-reported questionnaire, concentrations of neuropeptide hormones (adiponectin, brain derived neurotrophic factor [BDNF], leptin, and ghrelin) were determined, and the correlations were analyzed. In the results, job strain showed significant correlations with adiponectin (odds ratio [OR], 1.220; 95% confidence interval [CI], 1.001~1.498; p < 0.05) and BDNF (OR, 0.793; 95% CI, 0.646~0.974; p < 0.05), and ghrelin exhibited a significant correlation with food intake score (OR, 0.911; 95% CI, 0.842~0.985, p < 0.05). These results suggest that job stress affects food intake regulation by altering the physiological concentrations of neuropeptide hormones as well as emotional status.

• 한국지반공학회논문집
• /
• 제23권4호
• /
• pp.169-183
• /
• 2007

쇄석다짐말뚝으로 보강된 연약지반 상 기초지반의 침하특성과 하중분담효과를 구명하기 위하여 말뚝과 지반의 경계면 조건, 치환율, 형상비 및 상재하중 등을 고려하여 말뚝의 입력물성치 산정을 위한 현장재하시험과 수치해석을 수행하였고 본 연구의 해석결과와 비교, 검증하기 위하여 현장원형(prototype)시험을 진행 중에 있다. 아울러 기존의 SCP에 대한 탄성 하중전이 이론을 보정하여 수정식을 제안하였다. 해석결과 연성기초에 설치된 쇄석다짐말뚝의 경우 강성기초와는 다르게 경계면 조건에 따라 크게 영향을 받으며 침하특성은 자유변형률(free strain)로 인하여 말뚝은 감소하고 주변지반은 증가하는 경향을 보였으며 응력집중비는 말뚝 하부로 내려감에 따라 증가하였다. 또한 치환율과 형상비 증가에 따라 최대 응력집중비가 증가하나 어느 한계 이상에서는 수렴되었고 고치환율과 긴 말뚝에서는 상재하중 증가에 따른 영향을 크게 받는 것으로 나타났다.