Journal of The Korean Society of Agricultural Engineers (한국농공학회논문집)

The Korean Society of Agricultural Engineers (한국농공학회)
권호 표지
DOI QR코드

DOI QR Code

Mechanical Properties and Durability of Abrasion of EVA Concrete Reinforced Steel Fiber

강섬유 보강 EVA 콘크리트의 역학적 특성 및 내마모성

  • Sung, Chan Yong (Department of Agricultural and Rural Engineering, Chungnam National University) ;
  • Nam, Ki Sung (Dohwa Engineering Co., Ltd.)
  • Received : 2014.08.04
  • Accepted : 2014.08.28
  • Published : 2014.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study was performed to evaluate compressive strength, flexural strength, static modulus of elasticity, stress-strain ratio and durability of abrasion on EVA concrete reinforced steel fiber (SF) in order to use hydraulic structures, underground utilities, offshore structures and structures being applied soil contaminated area. It is used ordinary portland cement, crushed coarse aggregate, nature fine aggregate, EVA redispersible polymer powder, superplasticizer and deforming agent to find optimum mix design of EVA concrete reinforced steel fiber. EVA concrete reinforced SF was effected on the improvement of mechanical properties and durability of abrasion.

Keywords

References

  1. Bae, S. C., and W. G. Hyung, 2013. Properties of polymer modified mortars using re-dispersible polymer powders. Journal of the Korea Institute of Building Construction 13(3): 235-241 (in Korean). https://doi.org/10.5345/JKIBC.2013.13.3.235
  2. Choi, S. Y., K. K. Yun, and S. S. Choi, 2008. Strengthen effect of RC beam overlaid or repaired by VES-LMC. Journal of the Korea Concrete Institute 20(4): 423-430 (in Korean). https://doi.org/10.4334/JKCI.2008.20.4.423
  3. Han, S. H., J. K. Kim, W. S. Park, and D. H. Kim, 2001. Effect of temperature and aging on the relationship between dynamic and static elastic modulus of concrete. Journal of the Korea Concrete Institute 13(6): 610-618 (in Korean).
  4. Jo, Y. K., 2009. A study on the water permeability and drying shrinkage of polymer cement composites. Journal of the Korea Institute of Building Construction 9(5): 73-79 (in Korea). https://doi.org/10.5345/JKIC.2009.9.3.073
  5. Kang, S. T., K. N. Hong, S. H. Han, and S. W. Kim, 2009. The effect of fiber volume fracture on the softening behavior of steel fiber-reinforced ultra strength concrete, Journal of the Korea Concrete Institute 21(1): 13-20 (in Korean). https://doi.org/10.4334/JKCI.2009.21.1.013
  6. Kim, D. H., J. W. Lee, and C. G. Park, 2012. Effect of mineral admixture on bond between structural synthetic fiber and latex modified cement mortar under sulfate environments. Journal of the Korean Society of Agricultural Engineers 54(5): 25-34 (in Korean). https://doi.org/10.5389/KSAE.2012.54.5.025
  7. Kim, I. S., and C. Y. Sung, 2008. Compressive strength and acid-resistant of polymer concrete using redispersible polymer and blast furance slag powder. Journal of The Korean Society Agricultural Engineers 50(5): 19-27 (in Korean). https://doi.org/10.5389/KSAE.2008.50.5.019
  8. Kim., Y. I., and C. Y. Sung, 2007. Strength and watertightness properties of EVA Modified high strength concrete. Journal of the Korean Society of Agricultural Engineers 49(1): 45-54 (in Korean). https://doi.org/10.5389/KSAE.2007.49.1.045
  9. Koo, B. K., K. S. Jung, and T. B. Kim, 1992. The effect of reingforcing of steel fiber on the strength properties of the high-strength concrete. Journal of the Korea Concrete Institute 4(2): 93-101 (in Korean).
  10. Lee, Y. S., and M. K. Joo, 2003. Drying shrinkage and strength properties of ultrarapid-hardening polymer-modified mortar using redispersible polymer powder. Journal of the Korea Concrete Institute 15(3): 409-416 (in Korean). https://doi.org/10.4334/JKCI.2003.15.3.409
  11. Noh, K. H., and C. Y. Sung, 2004. Mechanical and drying shrinkage properties of polypropylene fiber reinforced high flow concrete, Journal of the Korean Society of Agricultural Engineers 46(5): 79-85 (in Korean). https://doi.org/10.5389/KSAE.2004.46.5.079
  12. Oh, Y. H., 2008. Evaluation of flexural strength for normal and high strength concrete with hooked steel fibers. Journal of the Korea Concrete Institute 20(4): 531-539 (in Korean). https://doi.org/10.4334/JKCI.2008.20.4.531
  13. Park, S. B., and B. C. Lee, 2002. Mechanical properties of steel fiber reinforced concrete using waste glass. Journal of the Korea Concrete Institute 14(6): 1,032-1,039 (in Korean). https://doi.org/10.4334/JKCI.2002.14.6.1032
  14. Park, S. K., J. P. Won, and C. G. Park, 2008. Strength properties and determination method of mix proportion factor of latex modified concrete. Journal of the Korean Society of Agricultural Engineers 50(5): 39-50 (in Korean). https://doi.org/10.5389/KSAE.2008.50.5.039
  15. Song, H. W., C. H. Lee, and K. Y. Ann, 2008. Factors influencing chloride transport in concrete structures exposed to marine environments. Journal of Cement & Concrete Composites 30(2): 113-121. https://doi.org/10.1016/j.cemconcomp.2007.09.005
  16. Won, J. P., J. Y. Lee, C. G. Park, and S. G. Park, 2007. Optimum mix proportion of latex modfied repair mortar for agricultural concrete structures. Journal of the Korean Society of Agricultural Engineers 49(2): 37-46 (in Korean).