• The Korean Journal of Emergency Medical Services
• /
• v.11 no.3
• /
• pp.5-15
• /
• 2007

The purpose of this study was to identity the distribution of post-traumatic stress types and coping methods and to find the relationship between the post-traumatic stress types and the coping methods, for firefighters who experienced in Dea-Gu Subway Fire Disaster. The Subjects of this study were 126 firefighters who experienced Deagu Subway Disaster. Q questionnaire developed by Q-study and coping methods instrument based on that of Folkman & Lazaruswas revised and complemented by Kim Jung Hee was used. Data were analyzed by t-test, ANOVA using SPSS. The results of this study were as follows : 1. The distribution of post-traumatic stress types were 52.4% of Emotional arousal trauma, 34.1% of Trauma experience persistence and 13.5% of Physiological symptom experience. 2. The difference of post-traumatic stress types according to the general characteristics were significantly related to the physical injury(p = .010). 3. The minimum score of coping with post-traumatic stress types was 0.07, the maximum was 2.96 and the mean score was 1.27. 4. The coping methods according to the general characteristics were significantly different at active coping method according to educational level(p = .001), passive coping method according to educational level(p = .003) and passive coping method according to diagnosis(p = 0.20). 5. The mean score of active coping method according types were Emotional arousal trauma(1.505), trauma experience persistance(1.322) and Physiological symptom experience(1.276). The mean score of passive coping method related with types were Emotional arousal trauma(1.328), trauma experience persistance(1.254) and Physiological symptom experience(1.219).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.6
• /
• pp.68-74
• /
• 2014

This study analyzes structural stress and fatigue about three types of automotive wheels. As maximum equivalent stresses at 1, 2 and 3 types become lower than the yield stress of material and deformations become minute, theses types are thought be safe on durability. Type 2 model has the most fatigue life among three kinds of types and the rest of models with fatigue lives are shown in the order of type 1 and 3. As the most fatigue frequency of type 2 model happens at the state of average stress and amplitude stress on the stress range narrower than type 1 or 3, type 2 model becomes most stable. In case of type 2 with the state near the average stress of 0 MPa and the amplitude stress of 300MPa, the possibility of maximum damage becomes 30%. This stress state can be shown as the most damage possibility. These study results can be effectively utilized with the design on automotive wheel by anticipating and investigating prevention and durability against its damage.

• Perspectives in Nursing Science
• /
• v.14 no.2
• /
• pp.81-89
• /
• 2017

Purpose: This study was performed to identify levels of clinical practice stress and coping strategies according to the personality/behavior types of nursing students. Methods: The subjects of this study were 143 third- and fourth-grade nursing students in 14 nursing colleges who had experienced clinical practice. The questionnaire consisted of instruments to identify Dominance, Influence, Steadiness, and Conscientiousness (DISC) personality/behavior types, clinical stress, and stress coping strategies. The data were analyzed using Cronbach's ${\alpha}$, descriptive statistics, and ANOVA, using the SPSS 24.0 program. Results: The DISC pattern showed high priority in Steadiness (48.3%), followed by Conscientiousness (21.0%), Influence (16.1%), and Dominance (14.7%), in that order. The steadiness type showed the lowest level of stress among four patterns. Conclusion: This study found that the personality/behavior types of nursing students differ. Additionally, different personality/behavior types can be attributed to stress levels and stress coping behaviors. Based on these results, different personality and behavior types of nursing students should be considered to manage their stress levels related to the clinical practicum experience.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.6
• /
• pp.351-360
• /
• 2020

PURPOSE. The aim of the present study was to compare the stress distributions on the dental implants, abutments, and bone caused by different overdenture attachment types under functional chewing forces. MATERIALS AND METHODS. The 3D finite element models of the mandible, dental implants, attachment types, and prostheses were prepared. In accordance with a conventional dental implant supported overdenture design, the dental implants were positioned at the bone level in the canine teeth region bilaterally. A total of eight models using eight different attachment systems were used in this study. All the models were loaded to simulate chewing forces generated during the centric relationship (450 N), lateral movement (400 N), protrusive movement (400 N), and also in the presence of a food mass unilaterally (200 N). Stress outputs were obtained as the maximum principal stress and the equivalent von-Mises stress. RESULTS. In all attachment types, higher stress values were observed in the abutments, dental implants, and bone in the magnet attachments in different loading conditions. The highest stress values were observed among the magnet systems in the components of the Titanmagnetics model in all loading conditions (stresses were 15.4, 17.7, and 33.1 MPa on abutment, dental implant, and bone, respectively). The lowest stress value was observed in the models of Zest and O-Ring attachments. CONCLUSION. The results of the present study implied that attachment types permitting rotation and tolerating various angles created lower stresses on the bone, dental implants, and abutments.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.2
• /
• pp.197-206
• /
• 2006

Statement of problem: One of common problems associated with single teeth dental implant prosthetic is the loosening of screws that retain the implants. Purpose: The maintenance of screw joint stability is considered a function of the preload achieved in the screw when the suggested initial tightening torque is applied. The purpose of this study was to investigate acquired preload after initial clamping torque for estimating screw joint stability. Material and methods: A comparative study on the effect of initial clamping of two types of implant systems with different connections was conducted Three dimensional non-linear finite element analysis is adopted to compare the characteristics of screw preloads and stress distributions between two different types of implant systems composed with abutment, screw, and fixture under the same loading and boundary conditions. Results: 1. When the initial clamping torque of 32Ncm was applied to the implant systems, all types of implants generated the maximum effective stress at the first helix region of screw. 2. Morse taper connection types of implants generate lower stress distributions compared to those by butt joint connection types or implants due to large contact surface between abutment and fixture. 3. The internal types of implant systems with friction grip type implant systems have higher resistance to screw loosening than that of the external types of implant systems since the internal types of implant systems generated larger preload than that generated by the external types for the same tightening moments.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.4
• /
• pp.117-124
• /
• 2016

Stress is resistance to stimuli to destroy a balance of mind and body in order to maintain an original steady state : A type of response and avoidance. Mild stress, which happens in tension, has a positive effect to improve concentration, but most of stress is likely to be a main factor to damage health. This is because it causes physical ailments and psychological diseases (e.g., depression, anger, frustration, loneliness, and anxiety). The purpose of this study is to analyze the difference between two groups, daytime and night university students, on ego-state, stressors, and stress coping types to improve their academic achievement by reducing their stress. There were 266 university students, who participated in a survey from November 30, 2015 until September 30, 2016. The study employed three measuring instruments : Ego-gram, stressor scale, and stress coping type scale. All the collected data were analyzed through regression analysis and t-test. The results of the regression analysis showed no significant differences in ego-state, stressors, and stress coping types between two groups. However, the results of t-test showed significant difference between the two groups : In terms of ego-state, a CP (Critical Parent) average of the night university students was significantly higher than the daytime university students'. Also, there is a significant difference in employment, future issues, and economic issues : the daytime university students considered employment and future issues more serious, while the night university students had more mental burdens of economic issues. When it comes to coping stress types, there was no significant difference between the two groups.

• Journal of Information Technology Services
• /
• v.15 no.1
• /
• pp.255-268
• /
• 2016

The purpose of this paper is to propose a notification service for preventing unexpected accidents which will be occurred by enlisted men's stress in Korean Army. For this purpose we first evaluate the enlisted men's stress with reliable evaluation tools through survey. A representative sample size of about 1,500 enlisted men from all seven unit types was selected and surveyed considering types of unit, ranks, and regional characteristics. In the second, we analyse the results of level of stresses and stress reactions to distinguish high potential enlisted men who will happen to accident. Through the second step, we know enlisted men's stress reactions are different depending their unit types. Therefore the basic information about their stresses will be judged respectively according to their unit types. In the final step, we propose a notification service that offer the information about high potential enlisted men who will happen to accident to their managers rapidly through military Intranet and information systems. Their managers will get the previous information about occurrence of unexpected accidents and have time to check various things before they are occurred. We hope the proposed service contributes to prevent unexpected accidents and reduce the effort of military managers. Furthermore this paper offers several recommendations to apply the proposed service to Korean Army.

• Journal of Technologic Dentistry
• /
• v.34 no.4
• /
• pp.473-482
• /
• 2012

Purpose: The purpose of this study was to investigate the stress distribution of the surrounding tissues according to 3 proximal plate types of the RPI clasp. Methods: The removeable partial denture which mandibular right and left second premolars and mandibular molars were lost was attached to a three dimensional photo elastic epoxy resin model. Then 120N of vertical load was applied. After 3-dimensional photoelastic stress analysis was used to record the isochromatic fringe patterns. Results: Kratochvil type guiding plane exhibited little uniform stress distribution on load center and alveolar ridge, but higher stress concentration on buccal surface of second premolar. Krol type guiding plane exhibited the stress concentration on the front of load center and relatively higher stress concentration on buccal surface of first premolar. However, this type had no effect on canine. Researcher type guiding plane showed the stress concentration on second premolar and molar, but the little stress distribution on first premolar. Conclusion: In all types, excessive stress concentration was appeared and three types were not significant different.

• Journal of the Korean Society of Safety
• /
• v.26 no.2
• /
• pp.77-82
• /
• 2011

Recently, personal characteristics of organizational members arc regarded as an important factor that affects performance of organization. In addition, job stress is attributed to one of main factors that result in poor work ability and high turnover rate. In this study, job stress, work ability and DISC personality types were surveyed targeting 292 of foreman in shipbuilding company. The relationships between job stress and personal characteristics including personality types and correlation between job stress and work ability were analyzed based on the result of survey. As a result of statistical analysis, there were six statistically significant relationships between job stress and age, job tenure, work type, hobbies, exercise, personality types. On the other hand, there was a statistically significant relationship between work ability and exercise. Furthermore, negative correlation between job stress and work ability were found. In accordance with these analysis, this study presented how to improve work ability by managing job stress items and personal characteristics that affect the stress and the stress level.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.52-60
• /
• 2019

In this paper, four types of insulation coils were fabricated by adding various kinds of glycols to improve the flexibility and adhesion of insulating coils in varnish dispersed with PAI / Nano Silica_15wt%. The applied voltage and frequency were 1.5 kV / 20 kHz for accelerated life evaluation. Through the 6th temperature stress level, the cause of the insulation breakdown of the coil was ignored and only the breakdown time was measured. The Arrhenius model was chosen based on the theoretical relationship between chemical reaction rate and temperature for estimating the insulation life of the coil due to accelerated thermal stress. Three types of distributions (Weibull, Lognormal, Exponential) were selected as the relationship between thermal stress model and distribution. The average insulation lifetime was estimated under the temperature stress of four types of insulation coils through the relationship between one kind of model and three kinds of distributions.