• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1677-1685
• /
• 2014

Short discrete fibers compounded with concrete can enhance the tensile resistance and ductility of concrete. Recently, the effectiveness of the reinforcement has increased according to the increasing length of steel fiber. However, the lengthening of steel fiber requires reducing the ratio of the fiber content to remain the workability and quality of concrete. Thus, the present study evaluated the flexural performance of fiber reinforced concrete with less than l.0% fiber volume ratios of steel fiber, 30mm and 60mm long, and polypropylene fiber, being evaluated as a good reinforcing material with chemical stability, long-term durability, and cost effectiveness. Concrete with more than 0.25% steel and 0.5% polypropylene fibers improved the brittle failure of concrete after reaching cracking strength. Concrete reinforced with polypropylene exhibited deflection-softening behavior, but that with more than 0.5% polypropylene delayed stress reduction and recovered flexural strength by 60 to 80% after cracking strength. In conclusion, concrete reinforced with more than 0.75% polypropylene could improve structural flexural performance. In particular, energy absorption capacity of reinforced concrete with 1.0% polypropylene fiber was similar to that with 0.5% and 0.7% steel fibers.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.259-266
• /
• 2012

A general earthquake resistant design philosophy of ductile frame buildings allows beams to form plastic hinges adjacent to beam-column connections. In order to carry out this design philosophy, the ultimate bond or shear strength of the beam should be greater than the flexural yielding force and should not degrade before reaching its required ductility. The behavior of RC members dominated by bond or shear action reveals a dramatic reduction of energy dissipation in the hysteretic response due to the severe pinching effects. In this study, a method was proposed to predict the deformability of reinforced concrete members with short-span-to-depth-ratios, which would result in bond failure after flexural yielding. Repeated or cyclic loading produces a progressive deterioration of bond that may lead to failure at lower cyclic bond stress levels. Accumulation of bond damage is caused by the propagation of micro-cracks and progressive crushing of concrete in front of the lugs. The proposed method takes into account bond deterioration due to the degradation of concrete in the post yield range. In order to verify bond deformability of the proposed method, the predicted results were compared with the experimental results of RC members reported in the technical literature. Comparisons between the observed and calculated bond deformability of the tested RC members showed reasonably good agreement.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.141-146
• /
• 2005

Ship have cutout inner bottom and girder and floor etc. Ship's structure is used much, and structure strength must be situated, but establish new concept when high stress interacts sometimes fatally the area. There is no big problem usually by aim of weight reduction, a person and change of freight, piping etc. Because cutout's existence grow up in this place, and, elastic buckling strength by load causes large effect in ultimate strength. Therefore, stiffened perforated plate considering buckling strength and ultimate strength is one of important design criteria which must examine when decide structural concept at initial design. Therefore, and, reasonable buckling strength about perforated stiffened plate need to ultimate strength limited design . Calculated ultimate strength varied several web height and cutout's dimension, and thickness in this investigated data. Used program(ANSYS) applied F.E.A code based on finite element method.

• YAKHAK HOEJI
• /
• v.55 no.4
• /
• pp.319-323
• /
• 2011

Curcumin, of which a critical characteristic is the capacity of crossing the blood-brain barrier, has been reported to induce the expression of neuroprotective heme oxygenase (HO)-1. The aim of this study is to compare HO-1-inducing capacity and neuroprotective activity of curcumin, its demethoxy (demethoxycurcumin, DMC; bis-demethoxycurcumin, BDMC) and hydrogenated derivatives (tetrahydrocurcumin, THC) in mouse hippocampal HT22 cells. Curcumin attenuated glutamate-induced cell death through HO-1 expression. DMC lacking a methoxy group on one of the aromatic rings possessed slightly lower activity in HO-1 expression and neuroprotection than curcumin. Similarly, BDMC, which lacks two methoxy groups on both of the aromatic rings, showed less activity than curcumin. These findings suggest that the presence of methoxy groups on the aromatic ring is required to enhance neuroprotective HO-1 expression. The reduction of the diarylheptadienone chain of curcumin by hydrogen, as in THC, was accompanied by a complete loss of ability to induce HO-1 expression and neuroprotection, suggesting that the conjugated double bonds of the central seven-carbon chain of curcumin may be essential for its ability to induce neuroprotective HO-1 expression. Our findings may provide useful information for further development of neuroprotective HO-1 inducers.

• Culinary science and hospitality research
• /
• v.21 no.1
• /
• pp.210-224
• /
• 2015

The purpose of this study is to identify the effects of involvement in temple food on overall satisfaction, recommendation, and revisit intention. From June 15 to August 30, 2014, for those who have participated in temple stay at four temples in South Korea, the self-administered survey was conducted. Of a total of 400 questionnaires, 289 were employed for the analyses, which accounted for 72% of response rate. Results shows that the involvement in temple food positively influenced experience driven by motivation in temple stay. Considering a particular research topic of temple stay, it implies that the involvement in temple food plays a key role in affecting emotional and social value relating to experience in temple stay. Entertaining, educational, aesthetic, deviated factors created by this experience will contribute to making special memories and feeling great enjoyment. In addition, emotional and social value by temple food have a positive effect on recommendation and revisit intention through experience satisfaction. Furthermore, experiential factor was significant to overall satisfaction, revisit and recommendation intention. Social and emotional value according to involvement in temple food, in terms of conclusions in this study, influenced a reduction of stress and improvement of enjoyment. These values relating to involvement in temple food, therefore, are assumed to be the causal relationship with experiential factor and satisfaction in temple stay and subsequently will be regarded as determinants in defining temple food as a heathy dish.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.915-922
• /
• 2017

The study on the thermal and oil resistance rubber composite, 2016. [6] predicted the lifetime of Fluorocarbon Rubber by accelerating aging at high temperature ($150^{\circ}C$, $175^{\circ}C$, $200^{\circ}C$). general rubber products are likely to exhibit different properties depending on the degradation factors such as temperature, humidity, ozone, light, emulsion, mechanical and electrical stress. To solve these problems, We compared the rate of change about tensile strength, elongation rate, volume change rate, weight change rate, thickness change rate, thermal conductivity in low temperature promoting aging on the basis of predictive lifetime of high temperature promoting aging. As a result of the review, the required life expectancy was satisfied, but there was a slight difference in the rate of change between the high-temperature promoted aging life result and the low temperature promoted aging life result. The cause was a reduction in "tensile strength / elongation" and an increase in "volume / weight / thickness" caused by the main chain decomposition of fluorine rubber due to aging at high temperature promoting aging. However, the low temperature promoting aging was caused by the curing reaction of fluorine rubber at $80^{\circ}C$. The tensile strength / elongation and volume / weight / thickness changes were small.

• Journal of Life Science
• /
• v.23 no.12
• /
• pp.1428-1435
• /
• 2013

The aim of this study is to investigate the melanogenic effect of Oenanthe javanica ethanolic extracts (OJE) containing quercetin and kaempferol in melanoma cells (B16F1). In order to determine whether OJE inhibits melanin synthesis at the cellular level, the melanoma cells were cultured in the presence of different concentrations of OJE. In the present study, the antioxidant effects of OJE on DPPH radical scavenging, power reduction, lipid peroxidation, and DNA oxidation were evaluated in a cell free system. Furthermore, the effect of OJE on the production of melanin was determined by dopaquinone (DOPA) assay and tyrosinase activity. In addition, the protein expression of tyrosinase, as well as antioxidant enzymes such as superoxide dismutase (SOD)-1, SOD-2 and glutathione reductase (GSH), were examined using Western blot analysis. In this study, it was observed that OJE exhibited an inhibitory effect on lipid peroxidation and blocked the DNA oxidation induced by the hydroxyl radical produced by Fenton's reagent. OJE increased melanin synthesis above 50 ${\mu}g/ml$ and tyrosinase activity was detected above 50 ${\mu}g/ml$. In Western blot analysis, OJE increased the expression levels of tyrosinase, SOD-1, SOD-2, and GSH in a dose-dependent manner. These findings indicate that OJE with antioxidant activity can regulate the tyrosinase activity and melanin production in melanocyte, suggesting that it could promote the development of black hair as well as protect skin from oxidative stress.

• Korean Journal of Materials Research
• /
• v.10 no.4
• /
• pp.312-316
• /
• 2000

A study has been made to investigate the effects of hot isostatic pressing(HIP ping) on bond strength and elevated temperature characteristics of thermal barrier coating(TBC). The specimens were prepared by HIPping of TBC which is composed of the ceramic top coat(8wt%$Y_2$$O_3$-$ZrO_2$) and the metallic bond coat on the matrix of IN738LC superalloy. The results showed that the porosity and microcracks in the ceramic top coat of TBC were significantly decreased by HIP. As a result, the bond strength of the HIPped coating was increased above 48% compared to that of as-coated specimen and microstructure was homogenized. It was found that the thermal cycle resistance of HIPped coating was inferior to that of as-coated specimen. It was considered that this result was mainly caused by the reduction of internal defects in the top coat layer which could play a role in relaxing the thermal stress due to a large difference in thermal expansion between TBC and matrix.

• The Korean Journal of Ecology
• /
• v.26 no.3
• /
• pp.135-142
• /
• 2003

Four legume plants showed better growth by the external nitrogen supply rather than the symbiotic nitrogen fixation only under salt additions. In case of Glycine max and Phaseolus angularis, total nitrogen contents decreased by high salinity level but their amino acid levels significantly increased with the increase of salt treatments and indicated high soluble-/insoluble-N ratios. Cassia tora and Albizzia julibrissin contained less amino acids than G. max and P. angularis but total N (esp. insoluble N fraction) increased with higher salt levels. Asparagine occurred as a main amino acid especially in G. max and P. angularis and can be seen as potential N-storage form in these plants. It might be play an important role for the osmoregulation mechanism under the saline condition. Meanwhile, to investigate what kinds of nitrogen sources are effective for overcoming salt stress on soybean plants, various N forms and concentrations (NH₄NO₃-N, NO₃-N, NH₄NO₃-N; 2.5 and 5 mM) were additionally supplied to the salt gradient medium. Soybean plants treated with NH₄NO₃-N showed the best growth up to 40 mM NaCl and NO₃- fed plants indicated good growth even at 80 mM NaCl treatments. Contrary to NH₄NO₃- and NO₃- fed plants, NH₄/sup +/- fed plants showed remarkable growth reduction and died by 40 and 80 mM NaCl treatments after the first harvest (15th day). Consequently, these results suggest that salt excluding and resistant capacities of soybean plants under NaCl treatments are increased in order of NH₄ - N, control, NO₃- N and NH₄NO₃- N depending on N concentration except NH₄- N treatments.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.1
• /
• pp.103-110
• /
• 2010

Recently, reducing usage of cement and using by-product of industry such as blast furnace slag and fly-ash have been increased to reduce $CO_2$ gas emission. That apply to construction. As a result, reduction of environmental stress and recycling of resources are expected. In this study, as basic study to the reuse of resources and reduce Environmental Load, comparing and analyzing hardening characteristics and durability as using the blast furnace slag and fly-ash, examining concrete characteristics substituted the three elements for the blast furnace slag and fly-ash and evaluating the relationship as binder. Through this, it want to provide the basic data for mass utilization. Blast furnace slag powder and replaced at fly-ash compressive strength of concrete in the strength of the initial seven days material age lower level of expression significantly compared to the concrete, but, 28 days after the similar or higher compressive strength than the concrete expression of the was. In addition, the reserves replacement of blast furnace slag powder salt injury increasing resistance are seen improvements, according to the conventional blast furnace slag powder study by the chloride ions on the surface of the concrete are improved being fixation salt injury resistance is considered.