Browse > Article
http://dx.doi.org/10.4334/JKCI.2012.24.3.259

Evaluation for Deformability of RC Members Failing in Bond after Flexural Yielding  

Choi, Han-Byeol (Dept. of Mega Building Structure, Sungkyunkwan University)
Lee, Jung-Yoon (Dept. of Architectural Engineering, Sungkyunkwan University)
Publication Information
Journal of the Korea Concrete Institute / v.24, no.3, 2012 , pp. 259-266 More about this Journal
Abstract
A general earthquake resistant design philosophy of ductile frame buildings allows beams to form plastic hinges adjacent to beam-column connections. In order to carry out this design philosophy, the ultimate bond or shear strength of the beam should be greater than the flexural yielding force and should not degrade before reaching its required ductility. The behavior of RC members dominated by bond or shear action reveals a dramatic reduction of energy dissipation in the hysteretic response due to the severe pinching effects. In this study, a method was proposed to predict the deformability of reinforced concrete members with short-span-to-depth-ratios, which would result in bond failure after flexural yielding. Repeated or cyclic loading produces a progressive deterioration of bond that may lead to failure at lower cyclic bond stress levels. Accumulation of bond damage is caused by the propagation of micro-cracks and progressive crushing of concrete in front of the lugs. The proposed method takes into account bond deterioration due to the degradation of concrete in the post yield range. In order to verify bond deformability of the proposed method, the predicted results were compared with the experimental results of RC members reported in the technical literature. Comparisons between the observed and calculated bond deformability of the tested RC members showed reasonably good agreement.
Keywords
RC member; shear span-to-overall depth ratio; bond failure after flexural yielding; plastic hinge length; ductile capacity;
Citations & Related Records
연도 인용수 순위
  • Reference
1 ACI-ASCE Committee 352, "Recommendations for Design of Beam-Column Connections in Monolithic Reinforced Concrete Structures," Journal Proceedings, American Concrete Institute, Vol. 82, No. 3, 1985, pp. 266-284.
2 Toshiyuki Kanakubo et al., "高强度人工輕量骨材コンクりトを用い構造部材の耐震性能に關する硏究 - 多段配筋を有するT形ばりの靭性," AIJ 日本建築學會大會學術講演梗槪集, 1989, pp. 405-408.
3 Ichinose, T., "Splitting Bond Failure of Columns under Seismic Action," ACI Structural Journal, No. 92-S51, 1995, pp. 535-542.
4 Fujii, S. and Morita, S., "Splitting Bond Capacities of Deformed Bars - Part1 Experimental Studies on Main Factors Influencing Splitting Bond Failure," Transactions of the AIJ, No. 319, 1982, pp. 47-55.
5 Hawkins, N. M., Lin, I. J., and Jeang, F. L., "Local Bond Strength of Concrete for Cyclic Reversed Loadings," Department of Civil Engineering, University of Washington Seattle, WA 98915 USA, pp. 331-341
6 Architectural Institute of Japan, Design Guideline for Earthquake Resistant Reinforced Concrete Buildings Based on Ultimate Strength Concept, 1990, pp. 104-105.
7 Hsu, T. T. C., "Softened Truss Model Theory for Shear and Torsion," ACI Structural Journal, Vol. 85, No. 6, 1988, pp. 624-635.
8 Vecchio, F. J. and Collins, M. P., "The Modified Compression- Field Theory for Reinforced Concrete Elements Subjected to Shear," ACI Structural Journal, Vol. 83, No. 2, 1989, pp. 219-231.
9 Ou, Y. C. and Kurniawan, R. A., "Plastic Hinge Length of Circular Reinforced Concrete Columns," The Eleventh Taiwan- Korea-Japan Joint Seminar on Earthquake Engineering for Building Structures SEEBUS, Kyoto, Japan, 2009, pp. 103-110.
10 Watanabe, F., "Mechanism of Shear Failure of R/C Column due to Bond Splitting," Proceedings of JCI 2nd Colloquium on Shear Analysis of RC Structures, JCI, 1983, pp. 61-68.
11 Lee, J. Y., "Theoretical Prediction of Shear Strength and Ductility of Reinforced Concrete Beams," A Thesis Submitted for the Degree of Doctor of Philosophy, Kyoto University, 1998, pp. 222-281.
12 Task Group Bond Models (former CEB Task Group 2.5), Bond of Reinforcement in Concrete, CEB-FIP, 2000.
13 김경원, "지진 하중을 받는 철근콘크리트 보의 부착 연성 평가," 성균관대학교 대학원 건설 환경 시스템 공학부 석사 학위 청구 논문, 1997, pp. 31-45.
14 Lee, J. Y. and Watanabe, F., "Predicting the Longitudinal Axial Strain in the Plastic Hinge Regions of Reinforced Concrete Beams Subjected to Reversed Cyclic Loading," Engineering Structures, Vol. 25, No. 7, 2003, pp. 927-939.   DOI   ScienceOn
15 Eligeuhausen, R., Popov, E. P., and Bertero, V. V., Local Bond Stress-Slip Relationships of Deformed Bars under Generalized Excitations, Report No. UCB/EERC82-83, Earthquake Engineering Research Center, University of California, Berkeley, California, 1993, pp. 169 (515/E45/1983).
16 Harajli, M. H., Hamad, B. S., and Rteil, A. A., "Effect of Confinement of Bond Strength between Steel Bars and Concrete," ACI Structural Journal, Vol. 101, No. 5, 2004, pp. 595-603.