• Journal of Power Electronics
• /
• 제11권1호
• /
• pp.97-104
• /
• 2011

This paper proposes a new alternating current driving method for highly capacitive loads such as plasma display panels or piezoelectric actuators, etc. In the proposed scheme, a current balance transformer, which has two windings with the same turn-ratio, provides not only a resonance inductance for energy recovery but also a current balance among all of the switching devices of the driver for current stress reduction. The smaller conduction loss than conventional circuits occurs due to the dual conduction paths which are parallel each other in the current balance transformer. Also, the leakage inductances of the transformer are utilized as resonant inductors for energy recovery by the series resonance to the capacitive load. Furthermore, the resonance contributes to the small switching losses of the switching devices by soft-switching operation. To confirm the validity of the proposed circuit, prototype hardware with a 12-inch mercury-free flat fluorescent lamp is implemented. The experimental results are compared with a conventional energy-recovery circuit from the perspective of luminance performances.

• 에너지공학
• /
• 제27권1호
• /
• pp.21-32
• /
• 2018

In this paper, we reported the current technologies of water scaling removal and also water recovery from the flue gases, which are funded by Department of Energy (DOE), USA. Globally, water resources are limited due to the climate change. The potential impacts of climate change is food and water shortages. In the $21^{st}$ century, water shortages and pollution are expected to become more acute as populations grow and concentrate in cities. At present, the water stress increases over 62.0 ~ 75.8% of total water basin area and decreases over 19.7 ~ 29.0%. Many renewable energy sources demand secure water resources. Water is critical for successful climate change mitigation, as many efforts to reduce greenhouse gas emissions depend on reliable access to water resources. Water hardness is one of the major challenge to coal power plants. Department of energy (DOE) funded and encouraged for the development of advanced technologies for the removal of hardness of water (scaling) and also water recovery from the flue gases from coal power plants.

• 생명과학회지
• /
• 제14권4호
• /
• pp.573-576
• /
• 2004

The purpose of the present study is to investigate the lipid peroxidation, creatine kinase activity and cortisol hormone levels following the training intensity in elite judo players. Six elite Judo players participated in the experiments (3h repetition judo program), which include stretching, judo skill practice and cool down without recess. Blood sampling were taken at the judo gymnasium at the time of resting, 1h training, 2h training, 3h training, 2h recovery, and 24h recovery time and this were analyzed for CK, MDA and Cortisol levels. The results obtained were analyzed via repeated measures of ANOVA using SPSS package program (ver.10.0) and a value of p<.05 was considered statistically significant. The results from this study were as follows. In the CK levels, which reflect the contribution of creatine phosphate and muscle damage degree, there was a significant difference (p<.05) after judo training in every period. Recovery 24h showed the highest level. In the MDA levels, which reflect lipid peroxidation, there was a significant difference (p<.05) after judo training. Recovery 2h showed the lowest level. In the cortisol hormone levels, which reflect stress status, there was a significant difference (p<.05). In this study, we can conclude that For the trained athletes, MDA level was lower at the time of exercise compare to the other period, this is caused by the increased antioxidant defence mechanism.

• 대한인간공학회지
• /
• 제26권4호
• /
• pp.153-160
• /
• 2007

Due to the high occurrence rate of musculoskeletal disorders(MSDs), many Korean companies adopted various assessment tools to evaluate workers' musculoskeletal stress. Using the results of this evaluation, tasks were selected for improvements. However, there are still many workers who complained of musculoskeletal stress of their tasks. Their tasks usually consist of repetitive activities and a short rest cycle. This prompts a concern of reliability of the evaluation tools and especially RULA. Thus in this study, OCRA(The Occupational Repetitive Action tool) was used to check whether RULA(Rapid Upper Limb Assessment) evaluates workers' musculoskeletal stress reasonably well since OCRA has been known to be a good evaluation tool for repetitive tasks and tasks with short recovery periods. The evaluation was conducted on 142 tasks. It was found that 65 tasks showed higher action levels by OCRA than by RULA. However, 13 tasks showed the reversed result and 64 tasks showed the same level regardless of the evaluation tool. It was concluded that either RULA or OCRA alone cannot evaluate all types of tasks very well. It is suggested that OCRA needs to be used with RULA together for the evaluations of musculoskeletal stress at workplaces where repetitive activities and short recovery periods exist.

• 한국재료학회지
• /
• 제21권11호
• /
• pp.617-622
• /
• 2011

The effect of oxygen on the shape memory characteristics in Ti-18Nb-6Zr-XO (X = 0-1.5 at%) biomedical alloys was investigated by tensile tests. The alloys were fabricated by an arc melting method at Ar atmosphere. The ingots were cold-rolled to 0.45 mm with a reduction up to 95% in thickness. After severe cold-rolling, the plate was solution-treated at 1173 K for 1.8 ks. The fracture stress of the solution-treated specimens increased from 450 Mpa to 880 MPa with an increasing oxygen content up to 1.5%. The fracture stress increased by 287MPa with 1 at% increase of oxygen content. The critical stress for slip increased from 430 MPa to 695 MPa with an increasing oxygen content up to 1.5 at%. The maximum recovery strain of 4.1% was obtained in the Ti-18Nb-6Zr-0.5O (at%) alloy. The martensitic transformation temperature decreased by 140 K with a 1.0 at% increase in O content, which is lower than that of Ti-22Nb-(0-2.0)O (at%) by 20 K. This may have been caused by the effect of the addition of Zr. This study confirmed that addition of oxygen to the Ti-Nb-Zr alloy increases the critical stress for slip due to solid solution hardening without being detrimental to the maximum recovery strain.

• 대한본초학회지
• /
• 제38권5호
• /
• pp.1-7
• /
• 2023

Purpose : To compare the skin damage recovery efficacy of natural Angelicae Gigantis Radix extract (N-AGR) and cultivated A. Gigantis Radix extract (C-AGR). Through this, we confirmed whether the quality standards of herbal medicines recorded in the classic books make a difference in the experimental efficacy using epithelial cells. Methods : The quality standards of medicinal herbs in the classic books and the cultivation and processing conditions of two types of A. gigas were compared. After inducing oxidative stress with H₂O₂, cytoprotective property of N-AGR and C-AGR were evaluated through cell viability. Additionally, after wound formation of epithelial JB6 cells, N-AGR and C-AGR were treated to evaluate wound healing efficacy. Result : The natural A, gigas met the excellent quality standards of the classic books. N-AGR inhibited cell death by oxidative stress induced by H₂O₂, and was superior to C-AGR. Both N-AGR and C-AGR showed dose-dependent wound healing efficacy, but N-AGR was significantly superior to C-AGR. Conclusions : Through the oxidative stress of skin and skin wound healing efficacy experiments using epithelial cells, natural A. gigas showed superior efficacy compared to cultivated A. gigas.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권6호
• /
• pp.636-643
• /
• 2000

Facial asymmetry is the most frequent disease in craniofacial deformities. And the primary causing area of that is mostly placing in mandible. That is to say, it is known that primarily, mandible grows excessively or deficiently, and other facial region involving maxilla undergoes compensatory growth secondarily, so asymmetric face develops. In facial asymmetry, the surgical correction of undergrowth is more difficult than that of overgrowth and the reason of it is the postoperative relapse caused by stress of surrounding soft tissues. It means the stress of surrounding soft tissues occurring after bone lengthening and reducing above stress is the same meaning with reducing postoperative relapse. Among various areas, mandibular ramus is the most difficult area to lengthen vertically and maintain its length. The reason of it is considered by many authors as the stress of surrounding pterygomasseteric sling which is enveloping lower border of mandible and interrupting elongation of ramal height. So we applied two different surgical procedures in which pterygomasseteric slings have different stress respectively to monkeys which have similar masticatory function and anatomy to human being and compared relapse by radiographic film and observed periodically the histochemical change of masseteric muscle fiber. So we could see the following results. The relapse was less in EVRO group in which we separated pterygomasseric sling in inferior border and didn't approximate muscle sling after vertical lengthening to minimize the stress of soft tissues than IVRO group in which we elongated ramal height preserving pterygomassetric sling. Of course, we could see a problem in EVRO group such as bone resorption in inferior border caused by uncovering the periosteum of inferior border. But we expect that such problem will be solved by developing periosteum substitutes for covering the exposed bone and minimizing the surgical trauma. In histochemical study of masseteric muscle fiber, the fiber constituents of EVRO group in which we minimized soft tissue stress was changed immediately after operation and maintained it for 1 year, whereas that of IVRO group in which we preserved soft tissue stress was changed in more portion after operation and recovered it by 1 year. By the histochemical results, we can see that the recovery of fiber constituents reflect the recovery of muscle stress and it is closely related with relapse phenomenon.

• 접착 및 계면
• /
• 제9권3호
• /
• pp.20-26
• /
• 2008

형상기억합금(SMA)의 구조는 부가된 온도 혹은 응력에 의해 마텐자이트로부터 오스테나이트로의 변화가 가능하다는 것은 잘 알려져 있다. 형상기억합금섬유의 자체 형상회복력으로 인해 응력과 온도가 적용되는 동안에 응력이나 경화 모니터링 센서 또는 작동기로서 사용되었다. 초탄성 현상은 연속적인 기계적 하중 하에서나 온도변화 중에 응력-변형률 곡선에서 확인되었다. 반복하중 실험을 통해 응력-변형률 곡선에서 나타난 초탄성 현상 구간이 나타나는 응력 이력현상이 발생함을 확인하였다. 이것은 형상기억합금섬유 혹은 에폭시에 함침된 형상기억합금섬유 복합재료가 반복하중으로 계면물성 저하로 인한 형상기억 회복 성능의 저하를 의미한다. 강성도가 큰 에폭시 사용과 형상기억합금섬유의 표면처리 이후 형상기억합금섬유와 에폭시 사이의 계면결합력의 증대에도 불구하고 유사한 불완전한 초탄성을 보여 주었다. 단-형상기억합금섬유/에폭시 복합재료 내부에 남은 잔류 열과 이에 따른 잔류 응력으로 인해 에폭시에 함침된 단-형상기억합금섬유에서는 경화과정에서 불완전한 회복을 나타났다.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2011년도 추계학술대회
• /
• pp.5-6
• /
• 2011

• Journal of Power Electronics
• /
• 제9권6호
• /
• pp.823-834
• /
• 2009

This paper proposes a high-efficiency single-stage ac/dc converter. The proposed converter features low voltage stresses and reduced switching losses. It operates at the boundary of discontinuous- and continuous-conduction modes by employing variable switching frequency control. The turn-on switching loss of the switch can be reduced by turning it on when the voltage across it is at a minimum. The voltage across the bulk capacitor is independent of the output loads and maintained within the practical range for the universal line input, so the problem of high voltage stress across the bulk capacitor is alleviated. Moreover, the voltage stress of the output diodes is clamped to the output voltage, and the output diodes are turned off at zero-current. Thus, the reverse-recovery related losses of the output diodes are eliminated. The operational principles and circuit analysis are presented. A prototype circuit was built and tested for a 150 W (50V/3A) output power. The experimental results verify the performance of the proposed converter.