• 제목/요약/키워드: stress range frequency

검색결과 205건 처리시간 0.024초

차분 전개를 이용한 표면파 기법의 모형 응답 계산 (A Study on the Finite Difference Forward Modeling in SASW Method)

  • 하희상;신창수;서정희
    • 지구물리와물리탐사
    • /
    • 제5권2호
    • /
    • pp.99-107
    • /
    • 2002
  • 표면파 기법(SASW, Spectral Analysis of Surface Waves)을 지반공학 분야에 효율적으로 적용하기 위해 모형 응답 알고리듬을 해석적으로 도출하였다. 이 논문에서는 이론적인 분산 곡선 응답 반응을 Aki and Richard에 의해 제안된 운동 응력 벡터(motion stress vector)를 이용하여 미분 방정식을 구성한 후 차분 전개를 통하여 구함으로서 동적 강성도 법이나 전파 행렬법에 비해 간단하고 빠르게 구할 수 있었다. 차분 전개를 통한 이론 분산 곡선 응답 반응 알고리즘으로 2개의 지구 모형에 대해 이론 분산 곡선을 구하여 타당성을 검증하였다. 또한 모형 응답 계산 과정에서 고려하여야 할 주파수 대역에 따른 적절한 모형의 크기에 대하여 고찰한 결과 각 파장의 $1.5\~2$배 이내로 모형의 크기를 결정할 때 경제적이고 안정적인 결과를 얻을 수 있었다.

Dynamic behavior of clayey sand over a wide range using dynamic triaxial and resonant column tests

  • Guler, Ersin;Afacan, Kamil B.
    • Geomechanics and Engineering
    • /
    • 제24권2호
    • /
    • pp.105-113
    • /
    • 2021
  • Deformations in soils induced by dynamic loads cause damage to the structures above the soil layers. It is important for geotechnical engineering practice that how the soil behaves due to repeated loads and the necessary precautions to be taken accordingly. Turkey is one of the most important seismic regions in Europe and earthquake studies to be conducted in this area are intended to reduce the damage as a result of taking the necessary measures. To determine the properties of soils under dynamic loads, stress-controlled dynamic triaxial and resonant column tests can be performed. In this study, these experiments were implemented in the laboratory on the clayey sand soil samples obtained from Bilecik Söğüt. To evaluate the effects of the confining pressure and rate of loading on the dynamic behavior of soils, samples were dynamically loaded by different rates at varying confining pressures. As a result, the changes in stress-strain properties of soils under dynamic loads were investigated. The alteration in behavior in terms of modulus reduction and damping ratios was obtained to vary a lot with the change of the lateral pressure on soil along with the frequency of the load.

다양한 시험법으로 규명된 암반 탄성계수 비교 (Comparison of Rock Young's Moduli Determined from Various Measurement Methods)

  • 유근환;장찬동
    • 지질공학
    • /
    • 제16권1호
    • /
    • pp.1-14
    • /
    • 2006
  • 국내의 대표적 암종이라 할 수 있는 화강암체와 편마암체에 대해 탄성계수 측정 방법으로 자주 이용되고 있는 Goodman jack시험, PS검층, 초음파 속도측정, 일축압축 변형 시험을 실시하여 각 탄성계수를 측정하고 그 특징을 알아보았다. 실내에서 측정 된 동.정탄성계수는 측정시 가해진 응력의 크기, 측정시 이용된 주파수의 범위, 가압/감압 등의 측정 조건에 따라 상당히 다른 결과를 보였다. 실내 측정조건이 현장조건에 가까워질수록 현장암반의 탄성 계수와 비슷한 값으로 측정되는데 이는 실내시험시 현장 상태를 구현하는 것이 중요하다는 점을 시사한다. 동탄성계수는 정탄성계수에 비해 대체로 높게 측정되었으며 그 원인으로는 (미세)균열의 응력에 따른 거동양상, 측정시 이용한 주파수의 범위 차이, 그리고 변형 진폭의 차이 등의 효과로 설명 할 수 있다. 다양한 방법으로 측정된 각 탄성 계수 상호간의 관계 및 특징은 현장 암반 탄성계수의 적절한 판단을 위해 도움이 될 것으로 기대된다.

Nonlocal elasticity approach for free longitudinal vibration of circular truncated nanocones and method of determining the range of nonlocal small scale

  • Li, C.;Sui, S.H.;Chen, L.;Yao, L.Q.
    • Smart Structures and Systems
    • /
    • 제21권3호
    • /
    • pp.279-286
    • /
    • 2018
  • The free longitudinal vibration of a circular truncated nanocone is investigated based on the nonlocal elasticity theory. Exact analytical formulations for tapered nanostructures are derived and the nonlinear differential governing equation of motion is developed. The nonlocal small scale effect unavailable in classical continuum theory is addressed to reveal the long-range interaction of atoms implicated in nonlocal constitutive relation. Unlike most previous studies applying the truncation method to the infinite higher-order differential equation, this paper aims to consider all higher-order terms to show the overall nonlocality. The explicit solution of nonlocal stress for longitudinal deformation is determined and it is an infinite series incorporating the classical stress derived in classical mechanics of materials and the infinite higher-order derivative of longitudinal displacement. Subsequently, the first three modes natural frequencies are calculated numerically and the significant effects of nonlocal small scale and vertex angle on natural frequencies are examined. The coupling phenomenon of natural frequency is observed and it is induced by the combined effects of nonlocal small scale and vertex angle. The critical value of nonlocal small scale is defined, and after that a new proposal for determining the range of nonlocal small scale is put forward since the principle of choosing the nonlocal small scale is still unclear at present. Additionally, two different types of nonlocal effects, namely the nonlocal stiffness weakening and strengthening, reversed phenomena existing in nanostructures are observed and verified. Hence the opposite nonlocal effects are resolved again clearly. The nano-engineers dealing with a circular truncated nanocone-based sensors and oscillators may benefit from the present work.

Double Two Switch Forward Transformer-Linked Soft-Switching PWM DC-DC Power Converter with Tapped Inductor Filters

  • Moisseev Serguei;Koudriavtsev Oleg;Hiraki Eiji;Nakamura Mantaro;Nakaoka Mutsuo;Hamada Satoshi
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
    • /
    • pp.193-197
    • /
    • 2001
  • This paper presents a novel circuit topology of the double two-switch forward type high frequency transformer linked soft-switching PWM DC-DC power converter with tapped inductor filters that can operate under a condition of the low peak voltage stress across the power semiconductor devices and lowered peak current stress through the transformer for some high power applications. This circuit topology of an interleaved two-switch forward soft-switching power converter is proposed in the order to minimize an idle circulating current due to the tapped inductor filter without of any additional active auxiliary resonant-assisted snubber circuits, such as active resonant DC link snubbers and AC link snubbers, active resonant commutation leg link snubbers. The unique advantages of this power converter are less power circuit components and power semiconductor devices, constant frequency PWM scheme, cost effective configuration and wider soft-switching PWM operation range under PWM power regulations load variations. The practical effectiveness of the proposed soft-switching converter circuit topology is tested by simulations and is proved by experimental results received from the 500W-100kHz breadboard setup.

  • PDF

간호대학생의 대학생활 적응에 미치는 영향 (Influence on Adjustment of University Life among Nnursing Students)

  • 차현수
    • 한국산학기술학회논문지
    • /
    • 제20권8호
    • /
    • pp.381-391
    • /
    • 2019
  • 이 연구의 목적은 건강증진행위, 스트레스, 자아효능감이 간호대학생 1, 2 학년의 대학생활 적응에 미치는 영향을 파악하기 위함이다. 자료는 1개 대학교 간호대학생 150명을 대상으로 2018년 11월 1일부터 11월 20일까지 자기기입식 설문지로 설문조사하여 수집하였다. 자료는 SPSS 22.0 (frequency, ANOVA, pearson's correlation, multiple regression) program 으로 분석하였다. 대학생활 적응 평균점수는 $75.85{\pm}9.43$ (범위:25~125) 이었다. 대학생활 적응은 스트레스와 부적 상관관계를 보였고 자아효능감과 정적 상관관계를 보였다. 스트레스는 자아효능감과 부적 상관관계를 보였다. 간호대학생 1, 2학년의 대학생활 적응에 영향을 미치는 요인들은 건강증진행위 (수면시간, 간식섭취, 음주, 취미활동), 스트레스, 자아효능감 등이었다. 덧붙여 건강증진행위, 스트레스, 자아효능감 등은 대학생활 적응에 13.9%의 설명력을 보였다. 이 연구의 결론은 건강증진행위(수면시간, 간식섭취, 음주, 취미활동), 스트레스, 자아효능감 등은 간호대학생 1, 2학년의 대학생활 적응에 중요한 영향을 미친다. 후속 연구에서는 건강증진행위와 자아효능감을 향상시키고 스트레스를 감소시키려는 연구가 필요하다. 간호대학생의 대학생활 적응을 향상시키기 위하여 위의 의미있는 변수들을 반영한 대학생활 적응 향상 프로그램을 개발해야 할 것이다.

Tripping wire가 부착된 회전원주에 의한 난류휴류의 응집구조 (Coherent Structures of Turbulent Wake Past a Rotating Circular Cylinder with a Tripping Wire)

  • 부정숙;이종춘
    • 대한기계학회논문집
    • /
    • 제19권8호
    • /
    • pp.1927-1939
    • /
    • 1995
  • An experimental investigation is conducted to find out the large scale coherent structures in the intermediate wake past a rotating cylinder with a single tripping wire attached. Relation between the vortex shedding frequency and the spin rate of rotating cylinder and the effects of the tripping wire on the flow characteristics were studied by using spectral analysis and conditional phase average technique, respectively. It is found that the vortex shedding frequency is bound to a certain range and varies regularly as spin rate increases. The coherent structures are compared with those of the plain rotating cylinder in the case of spin rate of 1.0. Distance between the upper and lower center of vortices increase and the vortex shedding time is delayed, the velocity fluctuation energy decreases near the center line of vortices and it spreads out to the outer region. The Reynolds shear stress increases highly in the upper region and the turbulent wake width expands with strong entrainment process.

Compact Wireless IPT System Using a Modified Voltage-fed Multi-resonant Class EF2 Inverter

  • Uddin, Mohammad Kamar;Mekhilef, Saad;Ramasamy, Gobbi
    • Journal of Power Electronics
    • /
    • 제18권1호
    • /
    • pp.277-288
    • /
    • 2018
  • Wireless inductive power transfer (IPT) technology is used in many applications today. A compact and high-frequency primary side inverter is one of the most important parts of a WPT system. In this study, a modified class EF-type voltage-fed multi-resonant inverter has been proposed for WPT application at a frequency range of 85-100 kHz. Instead of an infinite input choke inductor, a resonant inductor is used to reduce loss and power density. The peak voltage stress across the MOSFET has been reduced to almost 60% from a class-E inverter using a passive clamping circuit. A simple yet effective design procedure has been presented to calculate the various component values of the proposed inverter. The overall system is simulated using MATLAB/SimPowerSystem to verify the theoretical concepts. A 500-W prototype was built and tested to validate the simulated results. The inverter exhibited 90% efficiency at nearly perfect alignment condition, and efficiency reduced gradually with the misalignment of WPT coils. The proposed inverter maintains zero-voltage switching (ZVS) during considerable load changes and possesses all the inherent advantages of class E-type inverters.

무정형 PET 재료의 플라스틱 냉간 변형에서의 열처리 효과 (Annealing Effect in the Cold-Plastic Deformation of Amorphous PET Material)

  • 이종영;박성수
    • 폴리머
    • /
    • 제25권1호
    • /
    • pp.56-62
    • /
    • 2001
  • Polyethylene terephthalate(PET) 필름 시편을 약 0.5~500 mm/min의 속도까지 단계적으로 연신시켰을 때, 플라스틱 변형이 일어나는 동안에 투명 및 불투명 밴드들이 존재하는 넥킹영역이 형성되었다. 상기 시편의 응력-변형 곡선을 살펴보면, 응력 진동이 뚜렷하게 발생하였음을 확인할 수 있었다. 한편, 열처리된 시편의 응력-변형 곡선을 살펴보면, 응력 진동이 발생하지 않았음을 확인할 수 있었다. 시편들의 미세구조는 광학 현미경을 통하여 동적으로 관찰하였고, 시편들의 열적 특성은 시차 주사 열량기를 사용하여 10 ${\circ}C$/min의 승온 속도에서 측정하였다. 또한, 시편들의 배향화 및 결정화 정도는 단색-핀홀법을 이용하여 측정하였고, 시편들의 탄성계수는 동적 기계 분석기를 통하여 -150~70 ${\circ}C$의 온도 범위에서 1 Hz의 주파수 대에서 측정하였다. PET 펠렛을 전기로에서 약 83${\circ}C$에서 30분 동안 열처리하여 투명한 PET 제품을 제작하였다.

  • PDF

광대역 이봉형 응력 범위 스펙트럼에 대한 주파수 영역 피로 손상 평가 모델에 대한 연구 (A Study on Frequency Domain Fatigue Damage Prediction Models for Wide-Banded Bimodal Stress Range Spectra)

  • 박준범;강찬회;김경수;정준모;유창혁
    • 대한조선학회논문집
    • /
    • 제48권4호
    • /
    • pp.299-307
    • /
    • 2011
  • The offshore plants such as FPSO are subjected to combination loading of environmental conditions (swell, wave, wind and current). Therefore the fatigue damage is occurred in the operation time because the units encounter the environmental phenomena and the structural configurations are complicated. This paper is a research for frequency domain fatigue analysis of wide-band random loading focused on accuracy of fatigue damage estimation regarding the proposed methods. We selected ideal bi-modal spectrum. And comparison between time-domain fatigue analysis and frequency-domain fatigue analyses are conducted through the fatigue damage ratio. Fatigue damage ratios according to Vanmarcke's bandwidth parameter are founded for wide-band. Considering safety, we recommend that Jiao-Moan and Tovo-Benasciutti methods are optimal way at the fatigue design for wide-band response. But, it is important that these methods based on frequency-domain unstably change the accuracy according to the material parameter of S-N curve. This study will be background and guidance for the new frequency-domain fatigue analysis development in the future.