In general, the cutting pattern of the membrane structures is determined by dividing the complicated curved 3-D surface into several 2-D plane strip by using flattening technique. In this procedure, however, some discrepancies ore occurred between actual stresses of equilibrated state and designed uniform stresses because the material properties are not considered. These deviations can cause the critical structural problems, wrinkling or overstress, and thus a optimization process should be considered. In this paper, a new analytical method for determining an optimum cutting pattern considering material properties is presented. Here, iterative procedure is introduced to decrease the errors caused in numerical process. The optimization method proposed can diminish the deviations occurred by material properties and numerical errors, simultaneously. As a results, it is shown that the final stress distributions for the HP shell model are sufficiently near to design stress distributions, and it can be concluded that this method can be used to obtain the optimized cutting pattern of membrane structures.
본 연구는 일부 사무직 행정공무원들의 직무스트레스 수준을 파악하고 사회심리적 요인(A형 행동유형, 통제신념, 자기존중감)과 직무스트레스와의 관련성을 규명하고자 시도하였다. 연구대상은 C도청에 근무하고 있는 공무원 634명(남자 505명, 여자 129명)이었으며, 자료 수집은 2013년 2월 18일부터 3월 10일까지의 기간 동안에 구조화된 무기명 자기기입식 설문지를 이용한 설문조사에 의하였다. 연구결과, 조사대상자의 직무스트레스 수준은 성별, 연령, 학력, 결혼상태, 직급, 근무경력, 공무원생활에 대한 만족도, 흡연상태, 음주상태, 수면시간, A형행동유형, 통제신념 및 자기존중감에 따라서 유의한 차이를 보였다. 사회심리적 요인과 직무스트레스 수준과의 상관관계를 보면, 업무요구도는 내적 통제신념과 유의한 음의 상관관계를 보였으며, 업무의 자율성은 A형행동유형, 내적 통제신념 및 자기존중감과 유의한 음의 상관관계를 보였다. 상사의 지지도는 외적 통제신념과 유의한 음의 상관관계를 보였다. 위계적다중회귀분석 결과 직무스트레스 수준에 영향을 미치는 요인으로는 연령, 주관적인 건강상태, 직위, 잔업시간, 질병으로 인한 결근, 업무에 대한 만족도, 수면시간, 여가시간, 외래진료경험유무, A형행동유형, 통제신념 및 자기존중감이 선정되었으며 이들의 설명력은 32.1%이었다. 위의 모델에서 보면 A형행동유형, 통제신념 및 자기존중감 등의 사회심리적 요인이 추가됨으로 해서 15.0%의 설명력을 증가시켜 직무스트레스에 사회심리적 요인이 큰 영향을 미치고 있음을 알 수 있었다.
Dypepsia is the most common gastrointestinal disease and mainly occurs by stress or food. According to the cause of dyspepsia, the clinical characteristics and the curative process are different in patients. The purpose of this study is to compare acute dyspepsia patients depending on food factor and stress factor. For this study, we analyzed the cause, and the symptoms of 59 acute dyspepsia patients and divided them into two groups: one group is 27 acute dyspepsia patient group caused by stress factor (stress factor group). The other group is 32 acute dyspepsia patient group caused by food factor (food factor group). In addition, we carried out HRV test and compared HRV index between two groups. There was no significant difference in past illness involved in gastrointestinal tract diseases between two groups. There were big differences in the frequency of chest discomfort, thurst, lack of appetite, and exhaustion after meals between two groups. There were many changes of tongue fur in food factor group. But there were many changes of tongue body in stress factor group. The pulse pattern is mostly wiry in stress factor group. But, The pulse pattern is mostly slippery in food factor group. HF, TP were significantly lower than food factor group in stress factor group, it means autonomic nerve system was more suppressd in stress factor group than food factor group. Food factor group improved sooner than stress factor group. This study presented the clinically different characteristics (past medical history, symptoms, tongue diagnosis, pulse pattern, curative process) of acute dyspepsia depending on food factor and stress factor. Thus, it provides the necessity of oriental medical diagnosis and treatment called pattern identification for acute dyspepsia.
The purpose of this investigation was to analyze stress distribution in implant supporting tissue according to different types of attachments such as combination bar attachment, Hader bar attachment, O-Ring attachment and Dal-Ro attachment that are used in mandibular overdenture by using two osseointegrated implants, to study the influence that POM IMC used in bar type attachment has in implant supporting tissue and compare the preceding analyses to find out an effective stress distribution method. Three dimensional photoelastic method was used to obtain the following results. (A) Analysis of stress distribution according to attachment type 1. Under vertical load condition, compressive stress was seen at implant supporting area of working side on all the photoelastic models but in Hader bar attachment tensional stress was seen at distal upper area of implant supporting area. Relatively Hader bar and O-Ring attachment showed even stress distribution pattern. 2. Under vertical load condition, compressive stress at implant apex area and tensional stress at implant lateral supporting area were seen at nonworking side of all models. 3. Under $25^{\circ}$ lateral load condition, general compressive stress was seen at working side implant supporting area in most of the models, especially at distal upper supporting area higher compressive stress concentration was seen in combination bar attachment and tensional stress concentration, in Hader bar attachment. 4. Under $25^{\circ}$ lateral load condition, compressive stress at implant apex area and tensional stress at implant lateral supporting area were seen at nonworking side of all models, except O-Ring model which showed compressive stress only. (B) Influence of POM IMC to stress distribution in bar type attachment 5. Under vertical load condition, better stress distribution pattern was seen at working side of combination bar and Hader bar attachment model using POM IMC. 6. Under vertical load condition, stress value was increased at nonworking side of combination bar attachment model using POM IMC and tendency of increasing compression was seen at nonworking side of Hader bar attachment model using POM IMC. 7. Under $25^{\circ}$ lateral load condition, better stress distribution pattern was seen at working side of combination bar attachment model using POM IMC but tendency of increasing stress was seen on working side of Hader bar attachment model using POM IMC. 8. Under $25^{\circ}$ lateral load condition, stress reduction was seen at nonworking side of combination bar attachment model using POM IMC but tendency of increasing stress was seen at nonworking side of Hader bar attachment model using POM IMC.
본 연구는 일부 여대생의 자아존중감, 무망감, 우울, 통제위치 및 A형행동유형과 취업스트레스간의 관련성을 파악하고 취업스트레스에 미치는 융복합적 영향을 분석하였다. 조사대상은 전북지역에서 임의로 선정된 531명의 여대생으로 하였으며, 자료수집은 2016년 3월 28일부터 4월 29일까지 자기기입식 설문지를 통해 이루어졌다. 위계적다중회귀분석 결과, 자아존중감이 낮을수록, 무망감이 높을수록, 우울이 높을수록, 외적통제위치가 높을수록, A형행동 유행이 높을수록 취업스트레스가 높았으며 이들의 설명력은 43.2%이었다. 공분산 구조분석 결과, 자아존중감, 무망감, 우울, 통제위치 및 A형 행동유형과 취업스트레스의 인과관계가 확인되었다. 이상의 연구결과를 볼 때, 여대생의 취업스트레스를 낮추기 위해서는 자아존중감을 높이고 무망감, 우울, 통제위치 및 A형행동유형을 낮추는 노력이 필요하다. 이러한 결과는 여대생의 취업스트레스를 줄이는 프로그램 및 정책 개발에 활용이 기대된다. 향후연구에서는 취업스트레스에 영향을 미치는 추가요인에 대한 분석이 필요하다.
Objectives: To investigate the prevalence of acute stress disorder (ASD) and post-traumatic stress disorder (PTSD) in patients with traffic injuries. In addition, PTSD patients was classified using 'pattern identification for jing ji and zheng chong'. Methods: Questionnaires such as the primary care PTSD screen for DSM-5(PC-PTSD-5), Korean version of PTSD checklist-5 (PCL-5-K), and the instrument of pattern identification for jing ji and zheng chong were conducted on 195 patients within 3 days to 1 year after traffic accidents. Patients were recruited from six medical institutions. Collected data were used to determine the prevalence of acute stress disorder and post-traumatic stress disorder. Results: On PC-PTSD-5, the prevalence was 39.1% for ASD and 50% for PTSD. On PCL-5-K, the prevalence was 20.4% for ASD and 29.3% for PTSD. Satisfying both PC-PTSD-5 and PCL-5-K, the prevalence was 18.2% for ASD and 25.8% for PTSD. As a result of pattern identification for jing ji and zheng chong, 'weakness of heart and gall bladder type' accounted for the highest proportions in both ASD and PTSD groups. Conclusions: In this study, the prevalence was 39.1% for ASD and 50% for PTSD by PC-PTSD-5. Satisfying both PC-PTSD-5 and PCL-5-K, the prevalence was 18.2% for ASD and 25.8% for PTSD. Further large-scale prospective studies are needed to analyze the prevalence of ASD and PTSD, the rate of progression from ASD to PTSD, and the type of pattern identification.
This study is on the constant-current stress corrosion test related to the load stress in welded zone and non-welded zone of high tensile strength steel for natural gas transmission. The surface corrosion pattern of the welded zone of API 5L-X65 specimens for natural gas transmission showed global corrosion and narrow pitting, and the pitting was increased by increasing the load stress. Initially, the average relative electrode potential and the average relative current of the high tensile strength steel for natural gas transmission specimens was decreased suddenly, and the average relative electrode potential was higher and the average relative current was lower in welded zone than base metal. and the average relative electrode potential was decreased by increasing the load stress, and the average relative current was somewhat increased by increasing the load stress. The corrosion rate was less in welded zone than base metal, and the corrosion rate was decreased by increasing the load stress.
Easy detection and evaluation of defect in the tube structure is a continuous problem and remains a significant demand in tube inspection technologies. This study is aimed to automate defect detection using the pattern recognition approach based on the classification of high frequency stress wave signals. The stress wave signals from vibrational impact excitation on several tube conditions were captured to identify the defect in ASTM A179 seamless steel tubes. The variation in stress wave propagation was captured by a high frequency sensor. Stress wave signals from four tubes with artificial defects of different depths and one reference tube were classified using the autoregressive (AR) algorithm. The results were demonstrated using a dendrogram. The preliminary research revealed the natural arrangement of stress wave signals were grouped into two clusters. The stress wave signals from the healthy tube were grouped together in one cluster and the signals from the defective tubes were classified in another cluster. This approach was effective in separating different stress wave signals and allowed quicker and easier defect identification and interpretation in steel tubes.
Most manufacturing processes, including welding, create residual stresses. Residual stresses can reduce material strength and cause fractures. For estimating the reliability and aging of a welded structure, residual stresses should be evaluated as precisely as possible. Optical techniques such as holographic interferometry, electronic speckle pattern interferometry (ESPI), Moire interferometry, and shearography are noncontact means of measuring residual stresses. Among optical techniques, ESPI is typically used as a nondestructive measurement technique of in-plane displacement, such as stress and strain, and out-of-plane displacement, such as vibration and bending. In this study, ESPI was used to measure the residual stress on the welded part of butt-welded American Society for Testing and Materials (ASTM) A36 specimens with $CO_2$ welding. Four types of specimens, base metal specimen (BSP), tensile specimen including welded part (TSP), compression specimen including welded part (CSP), and annealed tensile specimen including welded part (ATSP), were tested. BSP was used to obtain the elastic modulus of a base metal. TSP and CSP were used to compare residual stresses under tensile and compressive loading conditions. ATSP was used to confirm the effect of heat treatment. Residual stresses on the welded parts of specimens were obtained from the phase map images obtained by ESPI. The results confirmed that residual stresses of welded parts can be measured by ESPI.
Objectives: The purpose of the study is to investigate the correlation between stress and smartphone addiction in some university students. Methods: The subjects were 220 health major students in D area. The study was conducted for 2 weeks, in June, 2016. The questionnaire consisted of general characteristics of the subjects, awareness toward stress, stress-coping pattern, and smartphone addiction. Data was analyzed through SPSS 18.0 program. Results: In the analysis of stress levels according to general characteristics, female group showed higher experience compared to male group (high group 46.10, subgroup 44.38) (p<0.05). Male group and higher stress group showed higher experience in problem solving, social support, and emotional stress coping (p>0.05). Stress and stress coping (r=0.322), stress and smartphone addiction (r=0.299) showed positive correlation. The significant factors of smartphone addiction were average daily using time (${\beta}=0.477$, p<0.001), study stress (${\beta}=0.177$, p<0.05), social stress (${\beta}=0.323$, p<0.01), problem solving (${\beta}=-0.320$, p<0.001), social support (${\beta}=0.064$, p<0.05), and emotional stress coping (${\beta}=0.264$, p<0.001). These factors explained 30.8% of the variance in smartphone addiction. Conclusions: The results from this study indicated that stress had a negative impact on smartphone addictions in subjects. It is necessary to provide smartphone addiction management for stress management.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.