1 |
Grad, L., Grum, J., Polajnar, I. and Slabe, J.M. (2004), "Feasibility study of acoustic signals for on-line monitoring in short circuit gas metal arc welding", Int. J. Mach. Tool. Manuf., 44 (5), 555-561.
DOI
|
2 |
Hall, L.D. and Mba, D. (2004), "Acoustic emissions diagnosis of rotor-stator rubs using the KS statistic", Mech. Syst. Signal Process., 18 (4), 849-868.
DOI
|
3 |
Haritos, N. and Owen, J.S. (2004), "The use of vibration data for damage detection in bridges: a comparison of system identification and pattern recognition approaches", Struct. Health Monitor., 3(2), 141-163.
DOI
|
4 |
Jamaludin, N. (2000), "Monitoring low speed rolling element bearing using stress waves technique", Ph.D. Dissertation; Cranfield University, Bedford, UK.
|
5 |
Jamaludin, N. and Mba, D. (2002a), "Monitoring extremely slow rolling element bearings: Part I", NDT & E International, 35(6), 349-358.
DOI
|
6 |
Jamaludin, N. and Mba, D. (2002b), "Monitoring extremely slow rolling element bearings: Part II", NDT & E International, 35(6), 359-366.
DOI
|
7 |
Lee, T.H., Choi, I.H. and Jhang, K.Y. (2008), "Single-mode guided wave technique using ring-arrayed laser beam for thin-tube inspection", NDT & E International, 41(8), 632-637.
DOI
|
8 |
Mahjoob, M.J., Shahsavari, A. and Marzban, A. (2007), "A vibration-based damage detection method for pipes conveying fluid", Proceedings of the 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Hawaii, USA, April.
|
9 |
Ryu, K., Son, D., Park, D. and Jung, J. (2009), "Reactance change at defect in Inconel tube with nickel sleeving", IEEE Trans. Magn., 45(6), 2733-2735.
DOI
|
10 |
Sansalone, M. (1997), "Impact-echo: The complete story", ACI Struct. J., 94(6), 777-786.
|
11 |
Allahkaram, S.R., Zakersafaee, P. and Haghgoo, S.A.M. (2011), "Failure analysis of heat exchanger tubes of four gas coolers", Eng. Fail. Anal., 18(3), 1108-1114.
DOI
|
12 |
Antaki, G.A. (2005), Piping and Pipeline Engineering-Design, Construction, Maintenance, Integrity, and Repair, Marcel Dekker, Inc., New York, NY, USA.
|
13 |
Atamturktur, S., Bornn, L. and Hemez, F. (2011), "Vibration characteristics of vaulted masonry monuments undergoing differential support settlement", Eng. Struct., 33(9), 2472-2484.
DOI
ScienceOn
|
14 |
Baxter, M.G., Pullin, R., Holford, K.M. and Evans, S.L. (2007), "Delta T source location for acoustic emission", Mech. Syst. Signal Process., 21(3), 1512-1520.
DOI
|
15 |
Birchall, M. (2007), "Internal ultrasonic pipe & tube inspection-IRIS", IV Conferencia Panamericana de END, Bueno Aires, Argentina, October.
|
16 |
Birring, A.S. (1999), "Selection of NDT techniques for inspection of heat exchanger tubing", ASNT International Conference on Petroleum Industry Inspection, Houston, TX, USA, June.
|
17 |
Broersen, P.M.T. (2006), Automatic Autocorrelation and Spectral Analysis, Springer-Verlag, London, United Kingdom.
|
18 |
Bulloch, J.H., Callagy, A.G., Scully, S. and Greene, A. (2009), "A failure analysis and remnant life assessment of boiler evaporator tubes in two 250MW boilers", Eng. Fail. Anal., 16(3), 775-793.
DOI
|
19 |
Carino, N.J. (2013), "Training: Often the missing link in using NDT methods", Construct. Build. Mater., 38, 1316-1329.
DOI
|
20 |
Sansalone, M. and Streett, W.B. (1997), Impact-echo: Nondestructive Evaluation of Concrete and Masonry, Bullbrier Press, Ithaca, NY, USA.
|
21 |
Schubert, F., Wiggenhauser, H. and Lausch, R. (2004), "On the accuracy of thickness measurements in impact-echo testing of finite concrete specimens-numerical and experimental results", Ultrasonics, 42(1-9), 897-901.
DOI
|
22 |
Shehadeh, M.F., Abdou, W., Steel, J.A. and Reuben, R.L. (2008), "Aspects of acoustic emission attenuation in steel pipes subject to different internal and external environments", Proceedings of the Institution of Mechanical Engineers, Part E: J. Process Mech. Eng., 222(1), 41-54.
DOI
|
23 |
Thanagasundram, S. and Schlindwein, F.S. (2006a), "Autoregressive based diagnostics scheme for detection of bearing faults", Proceedings of ISMA, Belgium, September.
|
24 |
Thanagasundram, S. and Schlindwein, F.S. (2006b), "Autoregressive order selection for rotating machinery", Int. J. Acoust. Vib., 11(3), 1-11.
|
25 |
Wilson, J.W. and Tian, G.Y. (2007), "Pulsed electromagnetic methods for defect detection and characterisation", NDT & E International, 40(4), 275-283.
DOI
|
26 |
Xueqin, L., Gang, L. and Shangqing, L. (2008), "The development of the boiler water wall tube inspection", Third International Conference on Electric Utility Deregulation and Restructuring and Power Technologies DRPT 2008, Nanjing, China, April.
|
27 |
Yang, B. and Li, X. (2013), "Pulsed remote field technique used for nondestructive inspection of ferromagnetic tube", NDT & E International, 25(1), 3-12.
DOI
|
28 |
Zakiah, A.H., Jamaludin, N., Syarif, J. and Yahya, S.Y.S. (2013), "Detection and analysis of defect in steel tube using Vibration Impact Acoustic Emission (VIAE) method", Int. Rev. Mech. Eng., 8(1), 277-282.
|
29 |
Cicero, S., Lacalle, R., Cicero, R. and Garcia, J. (2010), "Failure analysis of a steam generator superheater drain tube used in a dump", Eng. Fail. Anal., 17(1), 301-312.
DOI
|
30 |
Chen, X., He, Z. and Xiang, J. (2005), "Experiments on crack identification in cantilever beams", Experim. Mech., 45(3), 295-300.
DOI
|
31 |
Da Silva, J.J., Lima, A.M.N., Neff, F.H. and Neto, J.S. (2009), "Non-invasive fast detection of internal fouling layers in tubes and ducts by acoustic vibration analysis", IEEE Trans. Instrument. Measure., 58(1), 108-114.
DOI
|
32 |
Da Silva, R.R., Soares, S.D., Caloba, L.P., Siqueira, M.H.S. and Rebello, J.M.A. (2006), "Detection of the propagation of defects in pressurised pipes by means of the acoustic emission technique using artificial neural networks", Insight-Non-Destructive Test. Condition Monit., 48(1), 45-51.
DOI
|
33 |
Elforjani, M. and Mba, D. (2010), "Accelerated natural fault diagnosis in slow speed bearings with acoustic emission", Eng. Fract. Mech., 77(1), 112-127.
DOI
|
34 |
Gao, Y., Brennan, M.J., Joseph, P.F., Muggleton, J.M. and Hunaidi, O. (2005), "On the selection of acoustic/vibration sensors for leak detection in plastic water pipes", J. Sound Vib., 283(3-5), 927-941.
DOI
|
35 |
Godin, N, Huguet, S., Gaertner, R. and Salmon, L. (2004), "Clustering of acoustic emission signals collected during tensile tests on unidirectional glass/polyester composite using supervised and unsupervised classifiers", NDT & E International, 37 (4), 253-264.
DOI
|
36 |
Gotoh, Y. and Takahashi, N. (2007), "Three-dimensional FEM analysis of electromagnetic inspection of outer side defects on steel tube using inner coil", IEEE Trans. Magn., 43(4), 1733-1736.
DOI
|
37 |
Zhang, Y., Ye, Z. and Xu, X. (2007), "An adaptive method for channel equalization in MFL inspection", NDT & E International, 40(2), 127-139.
DOI
|
38 |
Zalik, K.R. (2008), "An efficient k′-means clustering algorithm", Pattern Recogn. Lett., 29(9), 1385-1391.
DOI
|
39 |
Zhan, Y.M. and Mechefske, C.K. (2007), "Robust detection of gearbox deterioration using compromised autoregressive modeling and Kolmogorov-Smirnov test statistic-Part I: Compromised autoregressive modeling with the aid of hypothesis tests and simulation analysis", Mech. Syst. Signal Process., 21(5), 1953-1982.
DOI
|