• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.934-939
• /
• 1998

This study discusses the results of adiabatic temperature rise tests which were performed considering various parameters, such as cement type, water-cement ratio, unit cement weigh, admixtures and placing temperature, which influence the temperature rise(K) and reaction velocity ($\alpha$). Theadiabatic temperature rise models obtained from this study are similar to those of Japan Concrete Institute. The models to calculate temperature rise and reaction velocity could be used the analysis f concrete thermal stress.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.43
• /
• pp.197-204
• /
• 1997

Torques on each joint, the compression on L5/S1 disc, the force on hand of a rider are estimated using a static biomechnic model. Forces that the rider applies to the pedals, saddle and handle during starting and speeding are estimated using static mechanics. Physical stress is considered accroding to handle height and horizontal distance between handle and pedal. When handle height is higher in normal speeding, the force on handle and sum of torques on each joint decreases.

• Journal of the Korean Society of Safety
• /
• v.11 no.3
• /
• pp.53-58
• /
• 1996

This paper deals with the bending fatigue strength of sintering spur gears. The test specimens are used to sintering spur gear to be consisted of Fe-C-Ni-Mn and SCM415 spur gear. The fatigue test at a constant stress amplitude is performed by using an electrohydraulic servo-controlled pulsating tester. The S-N curves are obtained and the enhancement of fatigue strength due to carburized treatment is clarified, Accordingly, this study presents the fatigue strength of sintering spur gear, SCM415 spur gear and carburized gears of them. The strength enhancement due to the carburized treatment is discussed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.815-816
• /
• 2010

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2018.06a
• /
• pp.93-93
• /
• 2018

• Korean Security Journal
• /
• no.31
• /
• pp.47-71
• /
• 2012

This study is to analyse the effect on self-effectiveness of a course decision of duty stress in the college students related to guard major study. For this, the college students related to guard major study in Gwang-ju and Jeonnam region were selected as a universe at April 2011. And a sampling was practiced as a random sample. A question investigation was used in a entry method of self-estimation. Furthermore a total of 171 person(85.5%) was used as final analysis data. The collected data were employed in a statistics program of SPSS for win version 17.0. And used in a way of Pearson's interrelation analysis and Multiple Regression Analysis. The conclusion was as follows. Firstly, family surroundings stress and studies stress of duty stress affected beneficially statistically a goal selection of self-effectiveness of course decision. Family surroundings influenced upon it positively. And studies effected on it negatively. Secondly, all factors of duty stress didn't affect beneficially statistically the work information of self-effectiveness of course decision. Thirdly, school surroundings stress of duty stress influenced upon positively statistically the problem solution of self-effectiveness of course decision. Fourthly, personality stress and duty anxiety stress affected beneficially statistically the future plan of self-effectiveness of course decision. Personality influenced upon it negatively and duty anxiety affected it positively.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.489-500
• /
• 1997

The number of railway bridges in Korea reaches to about 3,000. Among them, the ratio of steel bridges is about 47%. Most of the long span railway bridges take the truss type, its number is 15 in Korea. These bridges have more than 30 years service life, it is expected that the damages of cracks and corrosion is going. Therefore, the estimation of fatigue life with random stress is considered as significant subject in maintenance. In this paper, the random stress was measured in bridges and counted the stress cycles using the rainflow counting method So, the stress range frequencies and their equivalent stress are obtained and the amplification factor for the span length, bridge types and traveling speed is assessed by the dynamic testing. From the results, the stress range of the stringer and the lower chord is higher than the other members and the characteristics of the stress histogram is varied to the loading system and the amount of the passing through trains. And the impact effects are depended on the traveling speed as well as the span length.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.4
• /
• pp.369-374
• /
• 2015

In this paper, an EM sensing based prestressing force estimation method is proposed, in which it can estimate tensile force of PS tendon for PSC girder. The PSC girder has more improved performance than the general concrete girder by introducing the prestressing to the concrete. Thus the PSC girder bridge is widely constructed due to its high performance and low cost. However, the prestressing force has not been managed nevertheless it is major factor for the maintenance of the PSC girder bridge. The prestressing force was just measured during construction using jacking device and after that, it can not be managed. For this reason, this paper proposes a tensile force estimation method of PS tendon based on EM sensor. The permeability of ferroelectric material is changed according to the induced stress to the material, in which it can be measured using EM sensor. To measure the permeability of PS tendon, the EM sensor was fabricated and verified by performing the MTS test. The test was performed using 7-wire steel tendon under the 0, 40, 80, 120, 160, 200 KN of tensile force. The permeability of PS tendon was gradually decreased according to the increasement of tensile force. The regression method was used to find the relation between permeability and stress. As a result, the permeability has linear relation with the tensile force of PS tendon and the pre-stressing force can be estimated by the derived estimation equation.

• The Journal of Engineering Geology
• /
• v.10 no.3
• /
• pp.225-236
• /
• 2000

We conducted laboratory simulations of deep vertical drilling into the earth's crust to induce borehole breakouts and investigated their potential use for estimating in situ stress magnitudes in Westerly granite and Berea sandstone. Our experiments consisted of two major stages, a series of triaxial tests and borehole-breakout formation tests under a wide range of far-field stresses. We derived the Mohr-Coulomb, Nadai and Mogi failure criteria from the triaxial test results. Each criterion was compared with the stress condition at breakout boundaries. We concluded that the well known Mohr-Coulomb criterion is not compatible with the stress condition at breakout failure. On the other hand, polyaxial (truly triaxial) failure criteria such as the Nadai criterion for Berea sandstone and the Mogi criterion for Westerly granite were much more suitable for predicting breakout failure zone. Such failure criteria appeared to enable the reliable estimation of the magnitude of one of two horizontal principal stresses if the other one is known.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.1
• /
• pp.99-108
• /
• 2012

In this paper, fatigue tests are conducted for the specimens with longitudinal and transverse attachment under variable amplitude axial loading based on storm model. Considered loadings include repeated single storm, 6 or 8 storms randomly, and storms including calm sea condition while the mean stress and the maximum stress of loadings are changed. The effect of three variables are investigated; root mean square(RMS) value of stress amplitude, mean stress shift and maximum stress, which can characterize storm loading on fatigue life. In addition, experiments including calm sea loading are also carried out to investigate the effect of calm sea state. Test results are evaluated and compared with DNV-CN2005 and Matsuoka's method for the estimation of crack initiation and propagation life. To verify the validity of the criteria, the measured crack initiation lifes are compared with the specific crack length 15mm, which are calculated with beach marks.