• Journal of the Korea Concrete Institute
• /
• v.12 no.1
• /
• pp.69-77
• /
• 2000

Recently, many strengthening methods are developed to repair damaged structures, when the original structure is under loading, which causes the difference of initial stresses between original member and bonded material. However, current design method or theory, which mostly depends on ultimately strength design, cannot account the difference of initial stresses between members, and it disregards the reduction of nominal strength. In this study, a new strengthening design theory and the amount of strengthening which can account the difference of initial stresses are developed, and applied to the case when a structure in service is repaired. The results show that the amount of strengthening material depends on the status of damages of structure, and the nominal strength is reduced depending on the degree of damages.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.605-610
• /
• 1997

An experimental investigation was conducted to examine the feasibility of Carbon Fiber Sheet(CFS), a kind of high strength fiber, for a repair and reinforcement method of concrete structures. The experimental program included tests of flexural beams different in wrapping method and amount of CFS. The beams were subjected to monotonic loading. Although the flexural strength for concrete members increases with wrapping methods of CFS., the reduction factor due to the distribution, amount bond of CFS should be completely examined. This study approached the effectiveness and application of CFS, along with reinforcement effects of CFS on reinforced concrete beams through tests. Test results indicated that the increase in the number of CFS layer caused the increase in strength of beams in strength.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.765-768
• /
• 2004

This study reports the site application of the early strength development technology for form stripping earlier than normal state in the apartment construction. It is a method of framework rationalization and it needs the technology of early strength development concrete and 6-day cycle process. We applied the method to the apartment construction to reduce the floor construction period and to maximize the economical effect by reduction of the period of total construction. As a result, we confirmed the superior property of the early strength development of the concrete and reliable success of 6-day cycle process.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.66-73
• /
• 2019

Recently, FDM-type 3D printer technology has been developed, and efforts have been made to improve the output formability and characteristics further. Through this, 3D printers are used in various fields, and printer technologies are suggested according to usage, such as FDM, SLA, DLP, and SLM. In particular, the FDM method is the most widely used, and the FDM method technology is being developed further. The characteristics of the output are produced by the FDM-type 3D printer, which is determined by various factors, and particularly the perspective of the Inter-Layer Fill Factor, which is the volume ratio of the laminated material that exerts a direct influence. In this study, the Inter-Layer Fill Factor is theoretically obtained by presenting the internal space between each layer according to the laminate thickness as a cross-sectional shape model, and the cross section of the actual laminated sample is compared with the theoretical model through experiments. Then, the equation for the theoretical model is defined, and the strength change according to each condition (tensile strength of material, reduction slope, strength reduction rate, and output strength) is confirmed. In addition, we investigated the influence on the correlation and strength between laminate thickness and the Inter-Layer Fill Factor.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.762-765
• /
• 2008

Shotcrete is NATM technique after tunnel excavation as major tunnel support for ground stability, curtail of execution period and reduction of execution expenses instead of general lining method. It is trend using constantly shotcrete lining. This high-strength shotcrete is require to use as constantly shotcrete lining. This brought out the solution of environmental pollution and harmfulness about human. Accordingly, in this study Specimens of strength measurement was made to develop shotcrete possible to develop in early materials with Cement Mineral Accelerator as NATM method construction. It's compared with existing shotcrete material, Unconfined Compression test, flexural strength test were experimented. The fish poison test was experimented to evaluate an influence of environment. On results of test, Unconfined Compressive Strength and flexural strength was equivalent with 28-day strength of existing material. On results of fish poison evaluation research subject material was founded environmentally friendly for existing shotcrete.

• Journal of Powder Materials
• /
• v.9 no.3
• /
• pp.153-160
• /
• 2002

A nitrogen gas atomized aluminum powder was consolidated by powder-in sheath rolling method. A pure aluminum tube with outer diameter of 12 mm and wall thickness of 1mm was used as a sheath. The aluminum tube filled with the aluminum powder, first, was cold-rolled to the thickness of 6mm for performing, and then consolidated by the cold rolling and/or subsequent hot rolling at 360, 460 and $560^{\circ}C$. The aluminum powder compact fabricated by the sheath rolling showed high relative density more than 0.96 at any rolling conditions. The 0.2% proof stress increased with increasing hot rolling reduction and hot rolling temperature. Tensile strength was hardly affected by change in the hot rolling reduction, whereas it decreased with increasing hot rolling temperature. The powder compact showed the large elongation when cold rolling or hot rolling reduction was large. It was found that the sheath rolling was an effective method for consolidation of aluminum powder.

• Journal of the Korean Society of Safety
• /
• v.16 no.1
• /
• pp.59-64
• /
• 2001

Even though there is a guideline for the required strength of pipe support in inspection, it does not mean the nominal strength which can be used for the form work design. And, Concrete Specification defines that the pipe support should be designed according to the steel design guidelines but the design details are not provided, such as buckling length and the sectional modulus, etc. For the better prediction of strength of pipe support, the slenderness ratio of support which reflects the boundary condition should be considered. In this paper, the elastic buckling formula based on the slenderness is derived. The formula contains the strength reduction factor that consider the strength deduction caused by initial lateral deformation and is 0.65 consistently regardless of boundary conditions. And the coefficient of effective buckling length is calculated from the experiment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05b
• /
• pp.51-52
• /
• 2010

In this study, it is confirmed that the use of equivalent age method can be applied to predict the early-age strength in case of using the new early strength concrete developed for the reduction of construction work period by our company, in apartment.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.2
• /
• pp.99-107
• /
• 2007

A method was suggested by You et al. (2000) to calculate safety factor of a tunnel based on numerical analysis with the shear strength reduction technique. In the method, the shotcrete is assumed to fail when its stress exceeds the allowable stress. The proposed method had been steadily developed by You et al. (2005) and Han et al. (2006). In this study, the previous routine was corrected so that tunnel construction sequences could be considered in calculating the safety factor of a tunnel. In addition, a proper way to model shotcrete is to be suggested by comparing with the previous studies.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.57-60
• /
• 2008

This study investigated the results of insulation heat curing method using double layer bubble sheet in slab concrete and mass concrete in cold weather environment. First of all, when double bubble sheets are applied, it was shown that slab concrete was protected from early freezing by remaining between 6 and 15℃ even in case outside temperature drops -9℃ below zero until the 2nd day from piling, and in the case of mass concrete, with the maximum temperature difference between the center and surface less than 4℃, crack occurrence index was close to 2 and no hydration heat crack occurred by internal constraint. The insulation heat preservation curing method using the double bubble sheet applied in this field prevented early freezing owing to stable curing temperature management, deterring concrete strength development delay at low temperature, and obtained the needed strength. Also, it was proven that the method is highly effective and economic for cold weather concrete quality maintenance through curing cost reduction like construction period shortening and labor cost reduction, etc by reducing the process of temporary equipment installation and disassembling.