• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.857-862
• /
• 2007

The purpose of this research is to compare the stiffness increment effects with the floor plan shapes by the stiffness increment factors. For this, we generated the standard floor plans with Box and T type shapes. Then applied the stiffness increment factors -outrigger, material strength, member section- to those floor plans, and generated several alternative analysis models that make the effects of the factors to the lateral displacement exposed. Finally, we analyzed the stiffness increment effects and compared with each other by the stiffness increment factors. As a result, we found that the increment effects have not influence to floor plan shapes, and orders of stiffness increment effects are outrigger, core wall and material strength. We expect that the results of this study could be effectively utilized in the schematic structural design of tall buildings.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.397-402
• /
• 2001

Microstructural characteristics such as hydrates and porosity greatly influence the development of concrete strength. In this study, a strength estimation model for early-age concrete considerig, the microstructural characteristics was proposed, which considers the effects of both an increment of degree of hydration and capillary porosity on a strength increment. Hydration modeling and compressive strength test with curing temperature and curing ages were carried out. By comparing test results with estimated strength, it is found that the strength estimation model can estimate compressive strength of early-age concrete with curing ages and curing temperature within a margin of error.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.5
• /
• pp.49-55
• /
• 2002

The compression anchor is characterized by decrement of progressive failure, simple site work, economy and durability compared with tension anchor. In this paper, compression anchor is analysed through the laboratory element tests. The formula to be estimate the grout strength in fixed part of compression anchor and the effective reinforcement method for several types of soil were suggested. The following conclusions were made from this study : (1) A formula, which is able to calculate the grout strength in the fixed part of the compression anchor, is suggested. (2) The strength increment ratios( $R_{si}$) are 100％, 132％, 147％, 217％ according to the reinforcement method of grout. The reinforcement method is Non, Outside spiral, Inside-Outside spiral, Steel pipe, respectively. (3) The strength increment ratios( $R_{si}$) by reinforcing can be 8.23 times the strength increment effect according to the reinforcement types and ground confining pressure. (4) The steel pipe reinforcement is most effective in decomposed soil while, in the case of hard rock ground, high confining pressure is exerted on the grout, so there is no need to use reinforcements.

• Journal of Korean Port Research
• /
• v.14 no.3
• /
• pp.331-340
• /
• 2000

For the rational and economic design of the structural elements of ships which is built using welding, the ultimate strength analyses of the plates having initial imperfections, such as welding residual stresses and strains, are needful. The welding deformation usually relied on approximative equations or based on expert's experience. But in this paper, for the thermal elasto-plastic analysis of plates, the finite element analysis was performed, based on initial strain method. In formulating the incremental analysis, unbalanced force terns were included. In the plastic domain during the incremental process, the 2nd order terns stress increment and yield stress increment were considered, so that time increment could be controlled for a more stable solution. The ultimate strength analysis program of the plates having initial imperfections was made. The ultimate strength analysis was carried out based on the results of the welding deformations of this paper. In the ultimate strength analysis the Rayleigh-Ritz method based on the minimum potential theory was used.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.10a
• /
• pp.11-17
• /
• 1993

In this study, the fundamental properties of High-Strength Concrete(HSC), such as the slump loss, the temperature increment, the strength development, are considered by experiment. In reducing the temperature and the slump loss, and developing the strength of HSC, the application of silica fume as an admixtures is very effective. And when gypsum is added, the slump loss is reduced and the strength of HSC is improved remarkably, but the temperature of concrete is increased, thus a more study to reduce the temperature increment is required

• Journal of Korea Foundry Society
• /
• v.13 no.5
• /
• pp.432-440
• /
• 1993

Ductile cast iron has a good ductility and toughness than those of gray cast iron, because the shape of graphite is spheroidal. Also, it has been reported that, additional strengthening and toughening of the ductile cast iron can be obtainded from the proper combination of matrix structures by the heat treatment and addition of alloying elements. In this study the effect of special heat treatment and addition of alloying elements(Ni, Mo) on the multi-phase(ferrite-bainite-martensite) structures, strength and toughness of ductile cast iron were studied systematically. In water quenching from $770^{\circ}C$, the martensite volume(%) increased, but the ferrite volume(%) decreased with increment of Ni content. In as cast, pearlite volume(%) and hardness increased with increment of Mo and Ni contents. And with the increment of the destabilization austempering holding time, the bainite volume(%) increased but the martensite volume(%) decreased. As destabilization austempering holding time is same, bainite volume(%) decreased, martensite increased with the increment of Ni and Mo contents. The hardness and tensile strength decreased, but impact energy increased with the decrease of Ni and Mo contents, and increment of holding time of destabilization austempering treatment.

• Food Science and Biotechnology
• /
• v.14 no.2
• /
• pp.242-248
• /
• 2005

The effect of calcium and boron supplementation on bone strength was determined in growing and ovariectomized (OVX) Sparague-Dawley rats. Rats were divided into 9 groups and fed diet with different intake levels of calcium and boron for 4 weeks. About fifty percentages of rats in each group were OVX and the others were sham-operated. The rats were fed same diets after operation for 8 weeks. The feed intake, body weight gain, and FER were significantly higher in OVX rats than those in sham-operated ones. Serum osteocalcin, bone formation biomarker, was significantly increased with increment in calcium and boron intakes. Serum estradiol was lower in OVX rats than in sham-operated ones. Bone mineral density of femur was significantly lower in OVX rats than in other group. The breaking forces of bones were not significantly different among the groups. The urinary excretion of deoxypyridinoline, osteolytic marker was significantly increased with increment in calcium intake and ovariectomy. The urinary calcium excretion was significantly increased with increment in calcium intake, but decreased with increment in boron intake. According to theses results, the boron supplementation resulted in higher serum osteocalcin and lower urinary calcium excretion. Therefore, it could be suggested that the boron supplementation may be complementary and useful to calcium nutrition for bone health.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.613-616
• /
• 1999

The bond between reinforcing bar and concrete is a significant factor to confirm that they behave uniformly in the reinforced concrete. Thus, the studies on this field have been conducted by many researchers. But for the high strength lightweight concrete few studies have been done. In this study, the steel fiber reinforced high strength lightweight concrete developed to complement the brittleness of the high strength lightweight concrete was studied experimentally to find the local bond stress. Total 20 specimens were tested and the measured test values were compared with those calculated according to ACI 318-95 code and CEB-FIP code, respectively. The results indicate that the maximum bond stress has been influenced by increment of volume fracture of steel fiber, compressive strength and cover, Especially steel fiber caused not only increment of bond strength but also ductile behaviro.

• Journal of Surface Science and Engineering
• /
• v.37 no.5
• /
• pp.273-278
• /
• 2004

The requirements of getting spring steel with higher fatigue strength have been increased to achieve the weight reduction of a vehicle. As the possible increment in fatigue strength by using the conventional shot peening treatment is found to be limited, it is necessary to modify the shot peening treatment. In this study, to investigate the effects of warm shot peening on increasing fatigue strength, tests are conducted on spring steel SAE9524. By the results of rotating bending fatigue tests, the fatigue strength increases up to 23.8% in warm shot peening specimens at $200^{\circ}C$ compared with conventional shot peening. The major reason why the warm shot peening is effective to the improvement of fatigue strength is the increment of the compressive residual stress, which can be effectively formed by shot peening under the condition of warm temperature than room temperature.

• The Journal of Korean Physical Therapy
• /
• v.13 no.2
• /
• pp.273-280
• /
• 2001

The purpose of this study was to analyze the effect of quadriceps setting exercise(N= 10) and electrical stimulation(N= 10) on improvement of quadriceps muscle strength. The experiment were performed for 6weeks. The subject of this study was 20 college students(male) who had not any medical problems. The quadriceps muscle strength was evaluated by make use of the KIN COM(Isokinetic dynamometer). The electrical stimulator was used to stimulate the quadriceps muscle. The results were as follows: 1. The mean increment ratio was 29.6% for concentric muscle strength and 36.4% for eccentric muscle strength after quadriceps setting exercise(p<0.05). 2. The mean increment ratio was 21.2% for concentric muscle strength and 24.3% for eccentric muscle strength after electrical stimulation, but did not significantly higher than pre-electrical stimulation In this study, we have found that quadriceps setting exercise on left side affect the improvement of the muscle strength in college students(male). However, electrical stimulation did not affect on the muscle strength.