• 경영정보학연구
• /
• 제12권2호
• /
• pp.121-144
• /
• 2010

최근 들어, IT 부문에서는 ITSM의 도입이 확산되고 있는데, ITSM의 성공을 위해서는 단순히 프로세스의 구축이나 솔루션의 도입만이 아니라 지속적인 개선이 필요하다. 이러한 지속적인 개선의 주요한 도구로 6시그마 기법이 활용되고 있다. 본 연구에서는 프로젝트 수준에서 성공 사례와 실패 사례를 비교 분석하여, ITSM의 지속적인 개선에 6시그마 기법을 성공적으로 적용하는데 영향을 미칠 수 있는 요인들을 식별한다. 이를 위해서 먼저, 문헌 분석을 통해 6시그마 기법 적용의 성공요인을 식별하여 분류하고, 이러한 성공요인들 중에서 본 연구의 목적과 내용에 부합하는 요인을 결정한다. 선별된 요인을 중심으로 성공 사례와 실패 사례를 비교 분석하여, 이러한 요인들이 6시그마를 활용한 ITSM 개선 프로젝트의 성공과 실패에 미치는 영향을 분석한다. 분석 결과, 경영층 및 중간관리자의 참여, 프로젝트 팀의 참여, 프로젝트 선정 및 검증, 고객 및 시장연계, 기업 전략 및 목표 연계 등 5가지 요인 모두가 성공 사례와 실패 사례 간에 차이가 있다는 것을 발견하였다.

• Korea-Australia Rheology Journal
• /
• 제13권1호
• /
• pp.29-35
• /
• 2001

The development of filament stretching extensional rheometers over the past decade has enabled the systematic measurement of the transient extensional stress growth in dilute and semi-dilute polymer solutions. The strain-hardening in the extensional viscosity of dilute solutions overwhelms the perturbative effects of capillarity, inertia & gravity and the kinematics of the extensional deformation become increasingly homogeneous at large strains. This permits the development of a robust open-loop control algorithm for rapidly realizing a deformation with constant stretch history that is desired for extensional rheometry. For entangled fluids such as concentrated solutions and melts the situation is less well defined since the material functions are governed by the molecular weight between entanglements, and the fluids therefore show much less pronounced strain-hardening in transient elongation. We use experiments with semi-dilute/entangled and concentrated/entangled monodisperse polystyrene solutions coupled with time-dependent numerical computations using nonlinear viscoelastic constitutive equations such as the Giesekus model in order to show that an open-loop control strategy is still viable for such fluids. Multiple iterations using a successive substitution may be necessary, however, in order to obtain the true transient extensional viscosity material function. At large strains and high extension rates the extension of fluid filaments in both dilute and concentrated polymer solutions is limited by the onset of purely elastic instabilities which result in necking or peeling of the elongating column. The mode of instability is demonstrated to be a sensitive function of the magnitude of the strain-hardening in the fluid sample. In entangled solutions of linear polymers the observed transition from necking instability to peeling instability observed at high strain rates (of order of the reciprocal of the Rouse time for the fluid) is directly connected to the cross-over from a reptative mechanism of tube orientation to one of chain extension.

• 한국간호교육학회지
• /
• 제21권1호
• /
• pp.95-107
• /
• 2015

Purpose: The purpose of this study was to develop a tailored simulation learning (SL) program and to evaluate the effects of the program on the clinical competency, clinical decision-making competency, and communicative competency of new nursing staffs in intensive care units (ICU) and emergency rooms (ER). Methods: In this quasi-experimental study, fifteen nurses were assigned to the experimental group and fifteen to the control group. The experimental group was given the SL program of four sessions, whereas the lectures of four sessions were given to the control group. Data were analyzed using a $x^2$-test, Mann-Whitney U test, and Kruskal-Wallis test with an SPSS program. Analysis of covariance was used to treat the covariate of pre communicative competency between the experimental and control groups. Results: Based on the education needs of new nursing staffs in ICUs and ERs, three learning scenarios and one evaluating scenario were developed for the SL program. The score for clinical competency, clinical decision-making competency, and communicative competency were significantly higher in the experimental group compared with the control group. Conclusion: The SL program is an effective learning strategy for new nursing staffs in ICUs and ERs. These findings suggest that an SL program be offered as an alternative for new nurse orientation and continuing nurse education.

• 경영과정보연구
• /
• 제34권3호
• /
• pp.141-160
• /
• 2015

USNs, NFC, M2M에서 확장된 사물인터넷은 새로운 컨버전스 기술로써 주요 이슈가 되고 있다. 사물인터넷은 인간의 개입 없이 센싱 네트워크와 프로세싱 간에 공동으로 지능형 연결을 구축할 수 있는 네트워킹으로 정의된다. 본 연구의 목적은 사물인터넷이 물류 산업에 기여하는 것과 미래 사회에 대한 변화를 예측하는 것이다. 실제 세계 시장의 리더가 되기 위해서는 물류 산업의 사물인터넷 개발을 더 많이 요구하고 새로운 서비스 창조와 차별화된 시장을 위한 전략이 필요하다. 그러므로 물류 산업의 세계 리더가 되기 위해서는 다른 것들 보다 사물인터넷 표준화, 사생활 보호, 보안문제 등이 중요하다는 것을 알 수 있다. 따라서, 본 연구에서는 물류 산업의 사물인터넷 개발을 위해서 고객편의를 높이도록 노력하고 소비자의 수요를 잘 고려하여 차별화된 사물인터넷 물류 서비스를 제공할 수 있게 하여야 한다는 것을 보여주고자 함이 본 논문의 목적이며, 이를 위해 국내외 사례를 분석하고자 한다.

• 동아시아경상학회지
• /
• 제6권1호
• /
• pp.42-46
• /
• 2018

Purpose - The purpose of this study was to review and analyze EAJBE (The East Asian Journal of Business Economics) of EABEA (The East Asia Business Economics Association) and all of their published articles of 2013 to 2017 and to revise and update the existing publication standards and practices in order to improve the overall quality and reputation of EAJBE. Research design, data, and methodology - This paper applied an analytical approach, a case study method, to analyze and examine the published articles and the publication standards and practices of EAJBE (East Asian Journal of Business Economics) from their first publication. Results - The EAJBE has been issuing academic journals four times a year since its foundation. Although it is a journal based in Korea, overseas scholars publish articles steadily compared to other academic journals and the EAJBE raises the level of globalization. The level of internationalization of association's management and editorial members is also high, making the overall academic journal more cosmopolitan. Conclusions - Although the EABEA (The East Asia Business Economics Association) is a newly formed, the association is actively managing the academic community and making two major goals for the development of the academic journal. First, this journal is actively attracting overseas scholars, and is raising the level of internationalization. As an integrated academic conference is held with overseas scholars, they actively exchange with overseas scholars by contributing and publishing their papers. Second, it is seeking to establish national and international ties by publishing the papers of Korean scholars as well as abroad and holding academic contests regularly.

• 서비스연구
• /
• 제5권2호
• /
• pp.1-13
• /
• 2015

본 연구에서는 선행연구를 통하여 ICT 기업의 해외 수출 성과에 미치는 영향을 도출하여 도출된 영향요인들에 대해서 각 요인별로 중요도를 분석하면서 분석결과를 바탕으로 ICT 해외 수출기업에 실무적인 차원에서 해외 수출 성과에 미치는 영향요인들을 제시하였다. 분석결과 ICT 기업의 해외 수출성과에 미치는 영향요인으로 1차 계층 요인 중 기업특성이 가장 중요한 영향요인으로 분석되었고, 2차 계층 요인을 12개 요인으로 설정하여 분석한 결과에서는 수출경험, 최고경영자 시장지향성, 마케팅 전략, 수출시장 매력도 등 4개 요인이 매우 중요한 요인으로 분석되어 ICT 기업의 해외 수출성과에 미치는 영향 요인들이 우선은 기업 내부요인 즉, 기업 특성이나 마케팅 특성이 더 중요한 영향 요인임을 알 수 있었다.

• 한국BIM학회 논문집
• /
• 제5권4호
• /
• pp.53-62
• /
• 2015

Korea has been at the forefront of green growth initiatives. In 2008, the government declared the new vision toward 'low-carbon society and green growth'. The government subsidies and Feed-in Tariff (FIT) increased domestic usage of solar power by supplying photovoltaic housing and photovoltaic generation systems. Since 2000, solar power industry has been the world's fastest growing source with the annual growth rate of 52.5%. Especially, BIPV(Building Integrated Photovoltaic) systems are capturing a growing portion of the renewable energy market due to several reasons. BIPV consists of photovoltaic cells and modules integrated into the building envelope such as a roof or facades. By avoiding the cost of conventional materials, the incremental cost of photovoltaics is reduced and its life-cycle cost is improved. When it comes to atypical building, numerous problems occur because PV modules are flat, stationary, and have its orientation determined by building surface. However, previous studies mainly focused on improving installations of solar PV technologies on ground and rooftop photovoltaic array and developing prediction model to estimate the amount of produced electricity. Consequently, this paper discusses the problem during a planning and design stage of BIPV systems and suggests the method to select optimal design of the systems by applying the national strategy and economic policies. Furthermore, the paper aims to develop BIM tool based on the engineering knowledge from experts in order for non-specialists to design photovoltaic generation systems easily.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.267-270
• /
• 2006

The International GNSS Service (IGS) has managed the global GNSS network and provided the highest quality GNSS data and products, which are GPS ephemerides, clock information and Earth orientation parameter, as the standard for GNSS. An important part of its works is to provide the precise orbits of GPS satellites. GPS satellites send their orbit information (broadcast ephemerides) to users and their accuracies are approximately 1.6 meters level, but those accuracies are not sufficient for the high precise applications which require millimeters precision. The current accuracies of the IGS final orbits are within 5 centimeters level and they are used for Earth science, meteorology, space science, and they are made by the IGS analysis centers and combined by the IGS analysis center coordinator. The techniques making the products are very difficult and require the high technology. The Korea Astronomy and Space Science Institute (KASI) studies to make the IGS products. In this study, we developed our own processing strategy and made GPS ephemerides using Bernese GPS software Ver. 5.0. We used the broadcast ephemerides as the initial orbits and processed the globally distributed 150 IGS stations. The result shows about 6 to 8 centimeters in root-mean-squares related to IGS final orbits in each day during a week. We expect that this study can contribute to secure our own high technology.

• Design & Manufacturing
• /
• 제11권3호
• /
• pp.19-24
• /
• 2017

In these days, increase requirement of TEM (Transmission Electro Microscope) in not only scientific field but also industrial field. Because TEM can measure inner-structure of specimen a variety of materials like metal, bio. etc. When use TEM, specimen should be thin about 50nm. So making for thin specimen, use Ion milling device that include specimen holder. The holder generally made of Aluminium Aluminium holder is worn away easily. For this reason, using time of ion milling with aluminum holder is too short. To solve the problem, we replace aluminium holer to molybdenum alloy holder. In this paper, we design molybdenum alloy holer for CAM and modify CAD modeling for effective machining process. So we array a specimen 3 by 4 and setup orientation for one-shot machining process. Next we make a CAM program for machining. we making a decision two machining strategy that chose condition of tool-path method, step-down, step-over. etc. And then conduct machining using CNC milling machining center. To make clear difference between case.1 and case.2, we fixed machining conditions like feed-rate, main spindle rpm, etc. After machining, we confirm the condition of workpiece and analysis the problems case by case. Finally, case.2 work piece that superior than case.1 cutting with WEDM because that method can not ant mechanical effect on workpiece.

• 산업경영시스템학회지
• /
• 제42권3호
• /
• pp.206-216
• /
• 2019

The present study identified several antecedents that create perceived resistance to supply chain management (SCM) change. This work particularly emphasizes SCM change, which is notable given its central role in reacting market orientation and varied environmental and managerial conditions. A careful case study on a small and medium sized food production company in South Korea leads to the formulation of our framework including one second-order construct of 'resistance' as well as eight first-order constructs of 'implementing the payment terms', 'balancing of business process', 'fear of responsibility', 'business sustainability transparency', 'past experience of failure', 'competence of work personnel', 'cooperation with third parties' and 'sharing personnel information with partner'. The hypothesized relation of first- and second-order construct was validated using survey sample data collected from 350 respondents who completed their questionnaire instrument. Results from confirmatory factor analysis revealed that nomological validity was established at statistical significance level by identifying six first order constructs of 'implementing the payment terms', 'fear of responsibility', 'business sustainability transparency', 'past experience of failure', a conbined construct of 'competence of work personnel/cooperation with third parties' and 'sharing personnel information with partner'. The findings from our work are expected to provide important insights to the strategy for SCM risk management for small and medium sized company.