• Clean Technology
• /
• v.20 no.4
• /
• pp.433-438
• /
• 2014

There is an increasing interest in the development of rechargeable batteries suitable for use in both hybrid electric vehicles and energy storage systems that require higher charge & discharge rates, bigger battery sizes and increased safety of the batteries. Spinel-type lithium titanium oxide ($Li_4Ti_5O_{12}$) as a potential anode for lithium ion batteries has many advantages. It is a zero-strain materials and it experiences no structural change during the charge/discharge precess. Thus, it has long cycle life due to its structural integrity. It also offers a stable operation voltage of approximately 1.55 V versus $Li^+/Li$, above the reduction potential of most organic electrolyte. In this study, Ru added $Li_4Ti_5O_{12}$ composites were synthesized by solid state process. The characteristics of active material were investigated with TGA-DTA, XRD, SEM and charge/discharge test. The capacity was reduced when Ru was added, however, the polarization decreased. The capacity rate of $Li_4Ti_5O_{12}$ with Ru (3%, 4%) addition was reduced during the charge/discharge precess with 10 C-rate as a high current density.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.04a
• /
• pp.35-35
• /
• 2003

)를 금속와이어에 인가하면 저항발열에 의해 와이어가 미세한 입자나 금속증기상태로 폭발하는 현상을 이용한 것으로 기상합성법에 속한다고 할 수 있다. 선폭법은 다른 제조법에 비해 공정이 간단하여 생산비용이 저렴하며, 원재료의 조성을 갖는 분말의 합성과 금속간화합물, 융점차이가 나는 재료의 합금화 등이 가능하다. 인가에너지의 크기와 폭발 시 분위기를 제어함으로써 분말의 평균크기와 분포 제어 또한 가능하다. 본 연구는 러시아의 우수한 기초기술을 바탕으로 Pb-Sn계 합금은 전기폭발법으로 극미세분말을 제조하였으며, 분말의 형상, 상 화학조성의 변화를 조사하였다. 본 실험에 사용된 Sn-Pb계(All-Union State Standard 1499-70, 0.53mm)합금와이어는 자동시스템(1-0.6Hz)에 의해 챔버안으로 공급되었다. 이 때 임계폭발 와이어 길이는 50-80nm으로 실험을 행하였다. 챔버 압력은 1.4~2.0atm으로 유지하였다. 제조된 분말의 특성은 XRD, XRPES, SEM등을 이용하여 분말의 형상과 상, 화학조성, 표면분석을 행하였으며 DSC, TGA, BET분석을 통하여 온도변화에 따른 금속분말의 열량변화, 질량변화, 비표면적을 측정하였다. 제조된 Sn-Pb계 분말은 모두 평균 입도 117nm~220nm의 구형형상이었다. 이때 합금분말의 조성은 51.17~63.21 at%Sn, 35.47~46.37 at%Pb로 나타났다. 와이어에 인가되는 비에너지(W/Wc)가 감소된에 EK라 표면층의 Pb함량이 증가함을 보였다. 이는 와이어 내부 저항의 감소로 인한 공정시간의 지연과 Sn, Pb의 확산계수 차이에 의한 것으로 사료된다. 열분석 결과, Sn~Pb계 화합물의 융점은 167~$169^{\circ}C$로 관찰되었으며, $10^{\circ}C$/min로 $920^{\circ}C$까지 승은 하였을 때 17.1~18 wt%의 질량증가를 보였다.TEX>계 나노복합분말이 얻어짐을 알 수 있었다. 이 때 X션 회절피크의 line broadening으로부터 복합분말의 Fe 명균 결정립 크기는 24nm로 초미세 결정럽의 분말합금이었다. 포화자화값은 볼밀처리에 따라 점점 증가하여 MA 30시간에는 20.3emu/g로 포화됨을 알 수 있었다. 또한 보자력 Hc는 MA초기단계에 350e로 매우 낮으나 30시간 후에는 Hc값이 2600e로 매우 큰 값을 나타내었다. 이것은 환원반응결과 초기에 생성된 Fe의 결정립이 비교적 크고 결정결함이 적으나 볼밀처리를 30시간까지 행하면 Fe 결정렵의 미세화 빛 strain 증가로 magnetic hardening이 일어나기 때문인 것으로 사료된다.길이가 50, 30cm인 압출재를 제조하였다. 열간압출한 후의 미세조직을 광학현미경으로 압출방향에 평행한 방향과 수직방향으로 관찰하였고, 열간 압출재 이방성을 검토하기 위하여 X선 회절분석을 실실하여 결정방위를 확인하였다. 전기 비저항 및 Seebeck 계수 측정을 위하여 각각 2$\times$2$\times$10$mm^3$ 그리고 5$\times$5$\times$10TEX>$mm^3$ 크기의 시편을 준비하였다.준비하였다.전류를 구성하는 주요 입자의 에너지 영역(75~l13keV)에서 가장 높은(0.80) 상관계수를 기록했다. 넷째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며 큰 자기폭풍일수록 현저했다. 주상에서 관측된 이러한 특성은 서브스톰 확장기 활동이 자기폭풍의 발달과 밀접한 관계가 있음을 시사한다.se that were all low in two aspects, named "the Nonsignificant group". And the issues were high risk perception in general setting and lo

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.165-175
• /
• 2009

With the current move towards adopting mechanistic-empirical concepts in the design of pavement structures, state-of-the-art mechanistic analysis methodologies are needed to determine accurate pavement responses, such as stress, strain, and deformation. Previous laboratory studies of pavement foundation geomaterials, i.e., unbound granular materials used in base/subbase layers and fine-grained soils of a prepared subgrade, have shown that the resilient responses followed by nonlinear, stress-dependent behavior under repeated wheel loading. This nonlinear behavior is commonly characterized by stress-dependent resilient modulus material models that need to be incorporated into finite element (FE) based mechanistic pavement analysis methods to predict more realistically predict pavement responses for a mechanistic pavement analysis. Developed user material subroutine using aforementioned resilient model with nonlinear solution technique and convergence scheme with proven performance were successfully employed in general-purpose FE program, ABAQUS. This numerical analysis was investigated in predicted critical responses and domain selection with specific mesh generation was implemented to evaluate better prediction of pavement responses. Results obtained from both axisymmetric and three-dimensional (3D) nonlinear FE analyses were compared and remarkable findings were described for nonlinear FE analysis. The UMAT subroutine performance was also validated with the instrumented full scale pavement test section study results from the Federal Aviation Administration's National Airport Pavement Test Facility (FAA's NAPTF).

• Food Science of Animal Resources
• /
• v.29 no.6
• /
• pp.702-708
• /
• 2009

We investigated biofilm formation in various media, growth in low pH, and the hemolytic activity of 14 strains of Cronobacter spp. (Enterobacter sakazakii) isolated from a variety of foods including powdered infant formula (n=75), infant cereal (n=100), honey (n=30), and other infant foods (n=100) in Korea. The Cronobacter spp. adhered and formed biofilms on polyethylene, and a greater extent of biofilm was observed in nutrient-rich media. No clear difference in biofilm-forming ability was noted among the media constituents and the pattern of biofilm formation was strain-dependent. Seven strains out of 14 strains (50%) grew at pH 4.1, indicating that the acid resistance of these Cronobacter spp. isolated in Korea was relatively low. Hemolytic activity was not observed in any of the strains. This study provides basic information for the physiological and biochemical characteristics of Cronobacter spp. isolated from a variety of infant foods in Korea.

• Korean Journal of Microbiology
• /
• v.55 no.3
• /
• pp.191-198
• /
• 2019

H-NS binds to promoter DNA and works as a general transcription silencer. DicA protein, by binding to the promoter DNA of dicA, activates dicA expression and at the same time inhibits expression of dicF and dicB, thus, exerting cell division control in Escherichia coli. H-NS complexed with a nucleoid protein Cnu was known to be involved in dicA expression. However, the exact nature of H-NS binding to dicA promoter DNA and the consequences of H-NS binding in expression of dicA is not clear. In this study, we explored the DNA binding activity of H-NS on the promoter DNA of dicA and found that H-NS binding occurs exclusively to the dicA promoter DNA. We never observed, however, H-NS binding at the vicinity of the dicA promoter. Temperature dependent oligomerization of H-NS was observed during DNA binding and the Cnu protein enhances the oligomerization process of H-NS binding. In vivo measurement of dicA expression in an hns deleted strain showed that dicA expression increased. These results demonstrated that H-NS binds specifically to dicA promoter DNA and functions as a transcription silencer.

• Korean journal of applied entomology
• /
• v.59 no.4
• /
• pp.341-348
• /
• 2020

The ATP-binding cassette (ABC) transporter superfamily represents the largest transmembrane protein that transports a variety of substrates across extra- and intra-cellular membranes. In insects, the ABC transporter proteins play crucial roles in insecticide resistance. To date, no studies have investigated the involvement of ABC transporter gene for cross-resistance to insecticide chemistries. Here, we studied such possible mechanisms against six conventional insecticides using transgenic Drosophila melanogaster strains carrying Mdr49 transcript variant A. For the 91-R and 91-C strains of Drosophila melanogaster, although they have a common origin, 91-R has been intensely selected with DDT for over 60 years, while 91-C has received no insecticide selection. Our transgenic analyses showed that overexpression of 91-R-MDR49 transcript variant A along with three amino acid variations can yield a relatively low degree of cross-resistance to carbofuran (2.0~6.7-fold) and permethrin (2.5~10.5-fold) but did not show cross-resistance to abamectin, imidacloprid, methoxychlor, and prothiofos as compared to the Gal4-driver control strain without transgene expression. These results indicate that the overexpression of Mdr49A in itself leads to a cross-resistance and three amino acid changes have additional effects on positive cross-resistance to carbofuran and permethrin.

• Composites Research
• /
• v.35 no.4
• /
• pp.277-282
• /
• 2022

In this study, a smart material applicable to speed bumps was developed using low-cost starch and waterbased suspensions, and their properties were investigated. Viscosity and shear stress according to the shear rate was measured by a rheometer to observe shear thickening behavior according to starch concentration. The shear thickening phenomenon and applicability to speed bumps were identified macroscopically via drop weight test and bike driving test, measuring the vibration after impact with a driving speed of 5-25 km/h. As a result of the viscosity measurement, shear thickening occurred after the shear thinning region at the beginning, and the critical strain causing the shear thickening phenomenon decreased as the concentration of starch increased. Also, the viscosity and shear stress increased significantly with the increase of the starch concentration. As a result of the drop weight test and the bike driving test, the suspension was changed to a solid-like state in a short time, and the impact energy was absorbed in the fluid. The shear thickening phenomenon easily occurred as the concentration of the fluid and the applied impact (velocity) increased. Therefore, it can be proposed the development of a smart speed bump material that operates in the range of 5-25 km/h with a Non-Newtonian fluid based on water and starch.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6C
• /
• pp.255-263
• /
• 2010

This paper investigates the effects of tunnelling-induced ground movements on nearby structures, considering soil-structure interactions of different construction (ground loss) and soil characteristics. The response of four-story block structures, which are subjected to tunnelling-induced ground movements, has been investigated in different construction (ground loss) and soil conditions using numerical analysis. The structures for numerical analysis has been modelled using Discrete Element Method (DEM) to have real cracks when the shear and tensile stress exceed the maximum shear and tensile strength. The response of four-story block structures has been investigated with a ground movement magnitude and compared in terms of construction (ground loss) and soil conditions considering the magnitude of deformations and cracks in structures. In addition, the damage levels, which are possibly induced in structures, has been provided in terms of construction (ground loss) and soil conditions using the state of strain damage estimation criterion (Son and Cording, 2005). The results of this study will provide a background for better understandings for controlling and minimizing building damage on nearby structures due to tunnelling-induced ground movements.

• Journal of Korean Medicine Rehabilitation
• /
• v.23 no.4
• /
• pp.213-223
• /
• 2013

Objectives Low back pain (LBP) is one of the most common reason for people in Korea to visit Korean medical institutions. To assess actual amounts of use in the treatment of LBP in Korean medicine and to provide objective base line data for policy decision making, research regarding the current state of LBP patients' treatment in Korean medical institutions are in need. Methods The current study was designed as a retrospective chart review to investigate descriptive characteristics of LBP patients. The clinical records of 304 patients who were hospitalized for the treatment of LBP in Korean rehabilitation medicine inpatient clinics of five different Korean medicine hospitals were analyzed. The percentage of patient characteristics such as sex, age, average duration of admission, insurance type, diagnosed LBP related disease code, and rates of interventions applied were assessed. Results 1. The female sex was significantly predominant among patients with LBP : 105 patients (34.5%) were male and 199 patients (65.5%) were female. Percentage of the patients' age appeared as followed : 76 people (25.0%) were in their 50s, 64 people (21.1%) were in their 40s, 51 people (16.8%) were in their 30s, 37 people (12.2%) were in their 60s, and 33 people (10.9%) were in their 70s. Approximately half of the total LBP patients investigated were older than 50. 2. The average duration of admission was 16.2 days. Approximately one third (30.3%) of the patients were hospitalized for 8 to 14 days. 3. Female patients tended to stay admitted in hospitals slightly longer than male patients. Elderly (age 60~79) patients stayed in hospitals longer (17.8 days) compared to younger (age 20~39) patients (13.5 days). 4. More than half of the patients (171 cases, 56.3%) had their hospital bills covered with automobile insurance. 40.1% (122 cases) of the patients had medical insurance to cover their hospital bills. The average duration of admission of patients who had automobile insurance was 14.2 days, while that of the patients who had medical insurance was 18.4 days. 5. "Sprain and strain of the lumbar spine and pelvis" was the most commonly used (195 cases, 64.1%) disease code in patients with LBP. Patients diagnosed as "lumbar and other intervertebral disc disorders with radiculopathy" required the longest admission duration (22.1 days). 6. Herbal medication was applied to all of the patients during admission. Acupuncture was applied to all of the patients except one case diagnosed as spinal stenosis. Physical therapy, cupping therapy, moxibustion therapy, chuna therapy, and pharmacopuncture therapy were applied to 94.7, 92.8, 85.2, 83.9, and 49.7% of the patients, respectively. 7. There were certain differences among Korean medicine hospitals in terms of the LBP patients' duration of admission, type of insurance, frequency of the disease code use, type of intervention applied. Conclusions It is thought that the current study can be used as reference data in assessing the current state of LBP treatment in Korean rehabilitation medicine and a basis for future research. Provided improvements of certain limitations of the current study in future researches, such data would act as better base line data in policy decision making.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1998.10a
• /
• pp.2-4
• /
• 1998

Proliferation of Nocardia amarae cells in activated sludge has often been associated with the generation of nuisance foams. Despite intense research activities in recent years to examine the causes and control of Nocardia foaming in activated sludge, the foaming continued to persist throughout the activated sludge treatment plants in United States. In addition to causing various operational problems to treatment processes, the presence of Nocardia may have secondary effects on the fate of heavy metals that are not well known. For example, for treatment plants facing more stringent metal removal requirements, potential metal removal by Nocardia cells in foaming activated sludge would be a welcome secondary effect. In contrast, with new viosolid disposal regulations in place (Code o( Federal Regulation No. 503), higher concentration of metals in biosolids from foaming activated sludge could create management problems. The goal of this research was to investigate the metal sorption property of Nocardia amarae cells grown in batch reactors and in chemostat reactors. Specific surface area and metal sorption characteristics of N. amarae cells harvested at various growth stages were compared. Three metals examined in this study were copper, cadmium and nickel. Nocardia amarae strain (SRWTP isolate) used in this study was obtained from the University of California at Berkeley. The pure culture was grown in 4L batch reactor containing mineral salt medium with sodium acetate as the sole carbon source. In order to quantify the sorption of heavy metal ions to N amarae cell surfaces, cells from the batch reactor were harvested, washed, and suspended in 30mL centrifuge tubes. Metal sorption studies were conducted at pH 7.0 and ionlc strength of 10-2M. The sorption Isotherm showed that the cells harvested from the stationary and endogenous growth phase exhibited significantly higher metal sorption capacity than the cells from the exponential phase. The sequence of preferential uptake of metals by N. amarae cells was Cu>Cd>Ni. The specific surFace area of Nocardia cells was determined by a dye adsorption method. N.amarae cells growing at ewponential phase had significantly less specific surface area than that of stationary phase, indicating that the lower metal sorption capacity of Nocardia cells growing at exponential phase may be due to the lower specific surface area. The growth conditions of Nocardia cells in continuous culture affect their cell surface properties, thereby governing the adsorption capacity of heavy metal. The comparison of dye sorption isotherms for Nocardia cells growing at various growth rates revealed that the cell surface area increased with increasing sludge age, indicating that the cell surface area is highly dependent on the steady-state growth rate. The highest specific surface area of 199m21g was obtained from N.amarae cell harvested at 0.33 day-1 of growth rate. This result suggests that growth condition not only alters the structure of Nocardia cell wall but also affects the surface area, thus yielding more binding sites of metal removal. After reaching the steady-state condition at dilution rate, metal adsorption isotherms were used to determine the equilibrium distributions of metals between aqueous and Nocardia cell surfaces. The metal sorption capacity of Nocardia biomass harvested from 0.33 day-1 of growth rate was significantly higher than that of cells harvested from 0.5- and 1-day-1 operation, indicatng that N.amarae cells with a lower growth rate have higher sorpion capacity. This result was in close agreement with the trend observed from the batch study. To evaluate the effect of Nocardia cells on the metal binding capacity of activated sludge, specific surface area and metal sorption capacity of the mixture of Nocardia pure cultures and activated sludge biomass were determined by a series of batch experiments. The higher levels of Nocardia cells in the Nocardia-activated sludge samples resulted in the higher specific surface area, explaining the higher metal sorption sites by the mixed luquor samples containing greater amounts on Nocardia cells. The effect of Nocardia cells on the metal sorption capacity of activated sludge was evaluated by spiking an activated sludge sample with various amounts of pre culture Nocardia cells. The results of the Langmuir isotherm model fitted to the metal sorption by various mixtures of Nocardia and activated sludge indicated that the mixture containing higher Nocardia levels had higher metal adsorption capacity than the mixture containing lower Nocardia levels. At Nocardia levels above 100mg/g VSS, the metal sorption capacity of activate sludge increased proportionally with the amount of Noeardia cells present in the mixed liquor, indicating that the presence of Nocardia may increase the viosorption capacity of activated sludge.