• 한국항해학회지
• /
• 제25권1호
• /
• pp.1-9
• /
• 2001

1993년 IMO가 채택한 조종성 잠정기준에서 요구되는 4가지 항목 중, 특히 비대 선박의 경우, 침로 안정성이 문제시될 수 있다는 것은 잘 알려진 사실이다. 본 연구에서는 비대 선박의 조종운동시 타의 크기에 따른 선미 유동 특성을 조사하기 위해서 회류수조에서 사항상태의 조건 하에 두 종류의 모형실험을 수행하였다. 즉, 첫번째 실험은 타에 유입하는 흐름의 정류효과 측정에 대한 것이고, 두번째 실험은 타 상부와 선미오버행 하부 공간 주위의 흐름가시화에 대한 것이다. 실험결과, 타의 크기에 따른 선미 유동 특성과 타에 유입하는 흐름의 정류효과의 상관관계를 규명하였고, 타 상부와 선미오버행 하부의 공간은 침로 안정성에 있어서 중요한 역할을 한다는 것을 알 수 있었으며, 특히 타 상부와 선미오버행 하부의 공간이 작을수록 침로 안정성이 저하될 가능성이 높다는 것을 확인하였다.

• 대한기계학회논문집A
• /
• 제37권3호
• /
• pp.295-302
• /
• 2013

상온에서의 2롤 교정공정은 인발선재의 진직도를 향상시키기 위한 가공방법이다. 인발과정에서 생긴 인발선재의 내부 및 외부에 남아 있는 잔류응력은 2롤 교정을 거치면서 변하게 된다. 그에 따라서 인발선재의 선경에도 변화가 생긴다. 인발후 잔류응력이 남아 있는 소재에 대하여 롤사이의 거리(h)와 롤의 교차각도(${\alpha}_u$, ${\alpha}_d$)에 따른 선경변화를 분석하고 최종제품의 잔류응력과 선경변화를 예측하였다. 2롤 교정을 통한 최종제품의 선경변화를 예측해 실험값과 비교 및 검증한 결과 타당한 계산결과를 얻을 수 있었다. 상부롤과 하부롤의 교차각도는 잔류응력과 선경변화에 미치는 영향이 미미하였다. 반면에, 롤사이의 거리(h)는 잔류응력과 선경변화에 영향을 미치는 것을 확인하였다.

• 설비공학논문집
• /
• 제14권12호
• /
• pp.1047-1055
• /
• 2002

The present study is to investigate the pressure wave characteristics and the absorption of the maximum and minimum pressure generated by instantaneous valve closure and opening at the end of the straightening copper Piping system with and without an air chamber. Also, life of air chamber is investigated. Experiments were conducted under the following conditions: initial pressure of 1～5 bar, flow velocity of 0.5～3.0 m/s, water temperature of$20^{\circ}C$ and air chamber volume of 45.1～449.5$cm^3$ The results of the study can be used in sizing air chamber and selecting the water hammer absorbtion apparatus.

• 설비공학논문집
• /
• 제18권1호
• /
• pp.17-23
• /
• 2006

This study is to investigate the pressure wave characteristics and the maximum pressure rise generated by instantaneous valve closure at the end of the straightening polybutylene piping system. Experiments were conducted under the following conditions: initial pressure $1\~5$ bar, flow velocity $\~0.5-3.0m/s$ and water temperature $25^{\circ}C$. Results indicated that the peak pressure generated by quick valve closure reached Joukowsky's value. We also found that the maximum pressure rise and the pressure history depended on not only initial steady pressure but also flow velocity.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.374-375
• /
• 2008

In this study, the nano-composite actuator based on Fullerene and Nafion was newly developed to improve the electro active polymer actuators. The tensile test was employed to define the mechanical stiffness and strength of the nano-composite membrane. Also, the bending displacement of the Fullerene-Nafion based nano-composite actuator was investigated under DC and AC excitations with various magnitudes and frequencies. As a result, the new nano-composite actuator based on Fullerene-Nafion shows much larger deformation than the pure Nafion based actuator and solves the straightening back Problem of the previous electro active polymer actuators.

• 펄프종이기술
• /
• 제43권5호
• /
• pp.34-42
• /
• 2011

A fiber processing method, which might be an alternative for conventional refining process, was introduced. The method consists of repetitive, gentle, mechanical impacts on fibers, followed by fiber uncurling process. This method was very effective for OCC and BCTMP for increasing WRVs (water retention value) while keeping fiber lengths from shortening. For OCC and BCTMP, gentle mechanical impacts on fibers using Hobart mixer increased breaking lengths and tear strengths simultaneously at fast drainage level, and straightening fibers using kady mill increased those strength properties further. For SwBKP and HwBKP, only mechanical impacts using the Hobart mixer were effective on increasing tensile and tear strength at fast drainage, but there were no further increase by kady mill treatment. The strength increases of BCTMP by this alternative fiber processing method were exceptionally high. An extensive engineering development should be followed to actualize this fiber processing mechanism in an energy-effect way.

• 한국해양공학회지
• /
• 제17권2호
• /
• pp.21-26
• /
• 2003

The reel-lay method of submarine pipelines a continuous string of pipe coiled onto a reel. Assembly of this pipe that is string is accomplished onshore by welding, and nondestructive testing is carried out prior to coiling the pipe. The total length of pipes on the reel depends on the reel and pipe diameters. Pipeline installation is accomplished by uncoiling, straightening the pipe, and laying out the pipe string onto the seabed as the barge moves forward. Installation associated with coiling and uncoiling is related to the bending moment and strain relationship of the pipeline, A highgrade pipe material is required when the reel-lay method is used. This paper is concerned with the highly plastic bending moment of the pipeline, including the effect of ovality. Moment calculation in the pipe is accomplished by the numerical method, including the variable ovalities during the plastic bending of the pipe string. The new calculation method of the high plastic bending moment was applied to the reel-lay method.

• The Journal of Korean Physical Therapy
• /
• 제6권1호
• /
• pp.17-22
• /
• 1994

The purpose of this study were to identify the correlation of shoulder pain to Cervical Pathology and effectiveness of Cervical treatment on the neck and shoulder. Sixty patients complaining of shoulder pain only without neck pain were evaluated by physical examination. Cervical X- rays and electrodiagnostic Study. The results were as follows: 1) Forty nine Cases were abnormal in plain Cervical spine X-ray with straightening of Cervical lordotic curve in 41 cases, Cervical spondybsis 16 cases and disc space narrowing in 4 cases. 2) Cervical radiculopathies were diagnosed 52 cases which showed abnormal spontaneous activities in needle. EMG : 26 cases in paraspinal muscles and 26 cases in both paraspinal and upper extremity muscles. 3) The results of treatment were excellent in 6 cases, good in 6 cases and fair in 32 cases. 4) Treatment side were effective with shoulder and conical in 36 cases.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 춘계학술대회 논문집(Proceeding of the KOSME 2000 Spring Annual Meeting)
• /
• pp.110-114
• /
• 2000

This paper shows the possibility of performing the friction stir welding and the development of optimizing tools for FSW with 2mm thick plate of aluminum alloys using milling machine. This research can be reported on achieving above 90% of the tensile strength in 1050 aluminum alloys friction stir welded in the room temperature. This welding process is very simple and does not require filler metal eliminates straightening of the workpiece. It is currently attracting interest from different industries working with aluminum alloys.

• 설비공학논문집
• /
• 제12권7호
• /
• pp.697-702
• /
• 2000

This study is to investigate the pressure wave characteristics and the maximum pressure rise generated by instantaneous valve closure at the end of the straightening copper piping system. Experiments were conducted under the following conditions : initial pressure 1~5 bar, flow velocity 0.6~3.0 m/s and water temperature $20^{\circ}C$ . Results indicated that the peak pressure generated by quick valve closure reached Joukowsky's value. And we also found that the maximum pressure rise and the pressure history were depended on not only closing time but also flow velocity.