• 방사성폐기물학회지
• /
• 제15권2호
• /
• pp.135-149
• /
• 2017

사용후핵연료 건식저장의 실증연구는 건식저장 시스템의 안전성과 사용후핵연료의 저장 건전성 평가를 위한 확증적인 데이터 생산을 위하여 수행되어 왔다. 사용후핵연료의 건식저장을 가장 먼저 시작하였고 핵연료 건전성에 대한 법적 요건이 엄격하게 제시되어 있는 미국에서는 건식저장의 개시, 인허가 갱신을 위하여 주목할만한 몇몇 실증연구 프로그램을 운영한 바 있다. 건식저장 초기 단계에 건식저장 시스템 성능 검증 목적으로 실증연구가 수행된 바 있으며 저연소도 사용후핵연료의 건식저장 인허가 갱신을 위하여 건식저장 특성평가 프로젝트를 진행한 바 있다. 현재는 고연소도 사용후핵연료 인허가 연장을 위한 실증연구가 진행 중이며 이 연구는 향후 최소 10년이상 진행될 것으로 예상된다. 건식저장을 본격적으로 시작하지 않은 우리나라에서는 미국에서 진행해온 이러한 건식저장 실증연구가 훌륭한 타산지석이 될 것으로 생각되며 이에 본 논문에서는 미국의 건식저장 실증연구 프로그램의 과거와 현재를 분석하고 우리나라에서 진행할 필요가 있다고 사료되는 실증연구에 대한 제언을 담았다.

• Nutritional Sciences
• /
• 제9권2호
• /
• pp.112-116
• /
• 2006

This study investigated the effect of physical training on the utilization and recuperation of stored fuel with exercise in rats. For physical training, animals were exercised on treadmill for 30 minutes everyday. Forty eight rats were given either a physical training or no training for 4 weeks and were then subdivided into 3 groups: before-exercise (BE); during-exercise (DE); after-exercise (AE). The DE group was exercised on treadmill for 1 hour just before being sacrificed Animals in the AE group were allowed to take a rest for 2 hours after being exercised like the DE group. Glucose and free fatty acids were compared in plasma. Glycogen and triglycerides were compared in liver and skeletal muscle. Protein were compared in plasma, liver and skeletal muscle of rats. Plasma glucose levels of trained group were not significantly different from those of non-trained group. Muscle glycogen levels of trained group were significantly higher than those of non-trained group. Liver glycogen level of trained group was also significantly higher than that of non-trained group in DE while was not significantly different from those of non-trained group in BE and AF. Plasma free fatty acid levels of trained group were significantly higher than those of non-trained group in BE and AE. Muscle triglyceride levels of trained group tended to be higher than those of non-trained group in BE and DE and significantly higher than those of non-trained group in AF. Plasma and muscle protein levels of trained group were not significantly different from those of non-trained group. liver protein levels of trained group were not significantly different from those of non-trained group in BE and DE but were significantly higher than that of non-trained group in AE. Thus, it is suggested that an even moderate physical training may delay the onset of fatigue and improve exercise performance by facilitating the mobilization and oxidation of fat and conserving limited carbohydrate store.

• 방사성폐기물학회지
• /
• 제8권3호
• /
• pp.239-245
• /
• 2010

2009년말 기준으로 11,811 다발의 경수로 사용후핵연료가 방출되었으며, 지금까지 각 사용후핵연료에 대해 방사선원항을 가중하여 설계에 반영하기는 사실상 불가능하여, 원자력 관련시설 설계시 보수성을 갖는 기준 사용후핵연료를 선정하고 이를 바탕으로 시스템 설계를 수행하여 왔다. 방사선원항에 대한 단순모델을 적용하면 각 사용후핵연료에 대한 방사선원항을 가중함으로써 이와 같은 보수성을 배제할 수 있으므로 본 연구에서 웨스팅하우스형 원전에 사용된 사용후핵연료를 대상으로 방사선원항, 즉, 붕괴열, 방사능세기, 섭취위해도 등을 예측하기 위한 회귀모형을 개발하였다. 개발된 회귀식을 통해 예측된 방사선원항값은 ORIGEN-ARP 코드로 계산된 값과 약 5% 이내에서 잘 일치함을 확인하였으며, 이의 유용성을 검토한 결과 각각의 사용후핵연료에 대한 방사선원항을 가중하여 설계에 반영하면 보수성을 줄일 수 있음을 확인하였다. 따라서 본 연구에서 개발된 회귀식은 사용후핵연료의 저장 및 처분과 관련한 원자력시설 설계시 개념설계 단계에서 유용하게 사용될 수 있을 것으로 판단된다.

• 한국세라믹학회지
• /
• 제55권3호
• /
• pp.185-202
• /
• 2018

Photoelectrochemical (PEC) cells can convert solar energy, the largest potential source of renewable energy, into hydrogen fuel which can be stored, transported, and used on demand. In terms of cost competitiveness compared with fossil fuels, however, both photocatalytic efficiency and cost-effectiveness must be achieved simultaneously. Improvement of cost-effective, scalable, versatile, and eco-friendly fabrication methods has emerged as an urgent mission for PEC cells, and solution-based fabrication methods could be capable of meeting these demands. Herein, we review recent challenges for various nanostructured oxide photoelectrodes fabricated by solution-based processes. Hematite, tungsten oxide, bismuth vanadate, titanium oxide, and copper oxides are the main oxides focused on, and various strategies have been attempted with respect to these photocatalyst materials. The effects of nanostructuring, heterojunctions, and co-catalyst loading on the surface are discussed. Our review introduces notable solution-based processes for water splitting photoelectrodes and gives an outlook on eco-friendly and cost-effective approaches to solar fuel generation and innovative artificial photosynthesis technologies.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.303-306
• /
• 2003

To reduce the storage space of spent fuels used at the atomic power plants all over the world, the uranium elements contained in the spent fuels is being extracted and effectively stored. For this, the spent fuel are oxidized and deoxidized. In this study, it is produced conceptual design specification about the spent fuel management technology research and test facilities have been produced. The first considered processes in the facilities is the metal conversion furnace in the dry environment. Since this process is operates at the high temperature range, we have to consider heat-resisting designs for the device. For the heat-resisting designs, we have surveyed and analyzed technical references for material properties. Also, we have determined the temperature distribution condition of the device based on experimental results. We have calculated thermal stress and strain of each devices by the commercial analysis software, I-DEAS. By using the results, we have analyzed design configurations of the point at issue by thermal effects, and suggested alternative design configurations. It is experimented for inspecting confidence rate of heat strain. Based on these results, necessary design specifications for heat-resisting design have been produced.

• Nuclear Engineering and Technology
• /
• 제41권8호
• /
• pp.1109-1114
• /
• 2009

The evolution of a high burnup structure (HBS) in a light water reactor (LWR) $UO_2$ fuel was simulated using the Potts model. A simulation system for the Potts model was defined as a two-dimensional triangular lattice, for which the stored energy was calculated from both the irradiation damage of the $UO_2$ matrix and the formation of a grain boundary in the newly recrystallized small HBS grains. In the simulation, the evolution probability of the HBS is calculated by the system energy difference between before and after the Monte Carlo simulation step. The simulated local threshold burnup for the HBS formation was 62 MWd/kgU, consistent with the observed threshold burnup range of 60-80 MWd/kgU. The simulation revealed that the HBS was heterogeneously nucleated on the intergranular bubbles in the proximity of the threshold burnup and then additionally on the intragranular bubbles for a burnup above 86 MWd/kgU. In addition, the simulation carried out under a condition of no bubbles indicated that the bubbles played an important role in lowering the threshold burnup for the HBS formation, thereby enabling the HBS to be observed in the burnup range of conventional high burnup fuels.

• 한국정밀공학회지
• /
• 제33권12호
• /
• pp.965-970
• /
• 2016

Fuel used in the steel metallurgy industry is stored in huge stage systems called SILO. Fuel is released by RDM (Rotary Discharge Machine), at the place of utilization. RDM is located in the Silo, and is constituted of a main frame, driving part, discharging part and control part. RDM is combined to a direct motion on the rail in tunnel, having a rotary motion enabled by a motor. In this paper, we calculate the theoretical discharging capacity of RDM to confirm the correlation between design element and discharging capacity of RDM. Also, through structure analysis, we confirm the vulnerable point of RDM when it discharges the storage materials. We hope to apply these results to design a more efficient RDM.

• 방사성폐기물학회지
• /
• 제21권3호
• /
• pp.303-313
• /
• 2023

Spent fuels (SFs) are stored in a storage pool after discharge from nuclear power plants. They can be transferred to for the further processes such as dry storage sites, processing plants, or disposal sites. One of important measures of SF is the burnup. Since the radioactivity of SF is strongly dependent on its burnup, the burnup of SF should be well estimated for the safe management, storage, and final disposal. Published papers about the methodology for the burnup estimation from the known activities of important radioactive sources are somewhat rare. In this study, we analyzed the dependency of the burnup on the important radiation source activities using ORIGEN-ARP, and suggested simple correlations that relate the burnup and the important source activities directly. A burnup estimation equation is suggested for PWR fuels relating burnup with total neutron source intensity (TNSI), initial enrichment, and cooling time. And three burnup estimation equations for major gamma sources, ¹³⁷Cs, ¹³⁴Cs, and ¹⁵⁴Eu are also suggested.

• 방사성폐기물학회지
• /
• 제9권2호
• /
• pp.113-119
• /
• 2011

원자력발전소에서 나온 사용후핵연료 건식저장시스템의 안전한 운영과 유지는 기본적으로 적절하게 선택된 설계기준에 좌우된다. 저장시스템의 가장 중요한 설계목표는 저장된 사용후핵연료로부터 작업자의 안전과 대중에게 과도한 위험이 없이 보관, 취급, 수납 및 감시할 수 있는 신뢰를 제공하는 것이다. 이러한 목표를 달성하려면, 시스템의 설계, 사용후핵연료로부터의 잔류 열을 제거하고 방사선 차폐를 제공함과 동시에 설계 기준에 지정된 시스템의 수명동안 격납을 유지하기 위한 기능을 포함한다. 운영 중 발생가능한 설계사항은 설계 기준에 반영되어야 한다. 본 논문에서는 건식저장시스템의 일반적인 성능 요구 사항을 소개하였다. 저장시스템은 인허가를 위한 규제 요구사항과 연관하여 사용후핵연료를 저장할 수 있도록 설계된다. 여기서 최대연소도의 증가는 냉각기간과 맞물려 가감할 수 있다. 이때 열부하와 방사능의 크기가 최대 설계기준 연소도의 기준을 설정하는 주요한 인자가 된다. 이외에 건식저장시스템의 설계기준사고와 다른 분야 즉 기계 및 구조 그리고 차폐 및 방사선적인 요구사항들의 종류가 기술되었다.

• 방사선산업학회지
• /
• 제18권1호
• /
• pp.43-52
• /
• 2024

Currently, there are no interim storage facilities and permanent disposal facilities in Korea, so all spent nuclear fuels are temporarily stored. However, the temporary storage facility is approaching saturation, and as a measure to this, the 2nd Basic Plan for the Management of High-Level Radioactive Waste presented an operation plan for dry interim storage facilities and dry temporary storage facilities on the NPP on-site. The dry storage can be operated in various ways, and to select the optimal dry storage method, the reduction of exposure for workers must be considered. Accordingly, it is necessary to develop a worker exposure scenario according to the dry storage method and evaluate and compare the radiological impact for each method. The purpose of this study is to develop an exposure scenario for workers transporting spent nuclear fuel by dry storage method. To this end, first, the operation procedure of the foreign commercial spent nuclear fuel dry storage system was analyzed based on the Final Safety Analysis Report (FSAR). 1) the concrete overpack-based system, 2) the metal overpack-based system, and 3) the vertical storage module-based system were selected for analysis. Factors were assumed that could affect the type of work (working distance, working hours, number of workers, etc.) during transportation work. Finally, the work type of the processes involved in transporting spent nuclear fuel by dry storage method was set, and an exposure scenario was developed accordingly. The concrete overpack method, the metal overpack method, and the vertical storage module method were classified into a total of 31, 9, and 23 processes, respectively. The work distance, work time, and number of workers for each process were set. The product of working hours and number of workers (Man-hour) was set high in the order of concrete overpack method, vertical storage module method, and metal overpack method, and short-range work (10 cm) was most often applied to the concrete overpack method. The results of this study are expected to be used as basic data for performing radiological comparisons of transport workers by dry storage method of spent nuclear fuel.