• 제목/요약/키워드: storage facility

검색결과 616건 처리시간 0.031초

PLS-II 용 반도체 스위치 기반 키커 펄스 모듈레이터 설계 및 제작 (Design and Implementation of Solid-State Kicker Modulator for PLS-II)

  • 안석호;공형섭;박웅화;이병준
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2019년도 전력전자학술대회
    • /
    • pp.307-308
    • /
    • 2019
  • The Pohang Light Source (PLS) - II is a 3 GeV third-generation synchrotron radiation facility. To inject electron beam from LINAC, a kicker modulator system and kicker magnets are installed in the PLS-II storage ring tunnel. The injected beam then falls into the storage ring beam dynamic aperture. This paper describes the design and implementation of the solid-state kicker modulator for PLS-II. The solid-state kicker modulator is consisted of high voltage solid state switch stacks. the technical considerations of the solid-state switch stacking for kicker modulator is discussed. The achieved capability of the solid-state kicker modulator demonstrates that is fulfills the design requirement of providing half-sine pulsed current of 10kA (peak), 6us (Base-width), with jitter < 2ns (Standard deviation). simulation and experimental results are presented to demonstrate the performance of the solid-state kicker modulator.

  • PDF

Sampling Design for Defluoration of D-UF6

  • Kim, Jongjin;Moon, Jeongwook;Hong, Yunjeong;Kim, Jeong-guk;Hong, Dae-Seok
    • 한국방사성폐기물학회:학술대회논문집
    • /
    • 한국방사성폐기물학회 2018년도 추계학술논문요약집
    • /
    • pp.343-344
    • /
    • 2018
  • KAERI has about 185 tons of $D-UF_6$ from 1986 and it being stored 16 48Y type cylinders inside of storage building. The $D-UF_6$ cylinders should be transported to other countries for the deconversion into stable materials such as $U_3O_8$ in order to enhance the storage safety and disposal. For the transportation to other country and loading the cylinders to the deconversion facility, the sampling process is essential. The design and procedure for the sampling are now developing, and environmental effect evaluation and risk evaluation works will be performed to acquire license for the sampling.

  • PDF

Fuzzy FMECA analysis of radioactive gas recovery system in the SPES experimental facility

  • Buffa, P.;Giardina, M.;Prete, G.;De Ruvo, L.
    • Nuclear Engineering and Technology
    • /
    • 제53권5호
    • /
    • pp.1464-1478
    • /
    • 2021
  • Selective Production of Exotic Species is an innovative plant for advanced nuclear physic studies. A radioactive beam, generated by using an UCx target-ion source system, is ionized, selected and accelerated for experimental objects. Very high vacuum conditions and appropriate safety systems to storage exhaust gases are required to avoid radiological risk for operators and people. In this paper, Failure Mode, Effects, and Criticality Analysis of a preliminary design of high activity gas recovery system is performed by using a modified Fuzzy Risk Priority Number to rank the most critical components in terms of failures and human errors. Comparisons between fuzzy approach and classic application allow to show that Fuzzy Risk Priority Number is able to enhance the focus of risk assessments and to improve the safety of complex and innovative systems such as those under consideration.

MS Load Balancing Algorithm in Cloud Computing

  • Ankita Gupta;Ranu Lal Chouhan
    • International Journal of Computer Science & Network Security
    • /
    • 제24권9호
    • /
    • pp.157-161
    • /
    • 2024
  • Cloud computing becomes an important technology for distributed computing and parallel computing. Cloud computing provides various facility like to share resources, software packages, information, storage and many different applications depending on user demand at any time and at any place. It provides an extensive measure for computing and storage. A service provided by it to user follows pay-as-you-go model. Although it provides many facilities still there is some problem which are resource discovery, fault tolerance, load balancing, and security. Out of these Load balancing is the main challenges. There are many techniques which used to distribute wor9kload or task equally across the servers. This paper includes cloud computing, cloud computing architecture, virtualization and MS load balancing technique which provide enhanced load balancing.

방사성폐기물드럼 핵종재고량 평가시설 구축에 따른 방사선차폐 영향평가 (An Evaluation on the Radiation Shielding of the Radwaste Drum Assay Facility)

  • 지영용;곽경길;홍대석;손종식
    • 방사성폐기물학회지
    • /
    • 제10권2호
    • /
    • pp.117-123
    • /
    • 2012
  • 한국원자력연구원 내 저장중인 중 저준위방사성폐기물의 안전한 영구처분을 위하여 방사성폐기물처리시설에서는 이들 저장폐기물의 핵종재고량 평가를 위한 드럼핵종분석장치의 도입을 기획하고 있으며, 이 장치를 운영하고 유지보수하기 위한 전용의 평가시설 구축을 추진하고 있다. 이 평가시설 외부에는 제1방사성폐기물저장시설이 인접하여 있으며 내부에는 평가대상드럼들과 드럼핵종분석장치의 밀도보정용 선원 등이 존재함으로 이들이 방사선원항으로 작용하여 평가시설 내 외부의 선량률에 영향을 미치게 된다. 따라서 방사선원항 주변의 콘크리트 구조물에 대한 방사선차폐 영향을 평가하여야 한다. 본 연구에서는 MCNP 코드를 이용하여 해당 방사선원항으로부터 평가시설 내부 방사선관리구역을 둘러싸고 있는 콘크리트 구조물에 대한 방사선 안전성을 평가하였다. 평가결과 현재 고려되고 있는 콘크리트 구조물의 약 30 cm 두께는 해당 방사선원항으로부터의 방사선을 차폐하기에 충분한 것으로 확인되었다.

CUT TREE의 재구축 (RECONSTRUCTION OF THE CUT TREE)

  • 김채복
    • 대한산업공학회지
    • /
    • 제19권3호
    • /
    • pp.51-57
    • /
    • 1993
  • This paper develops 0($n^3$) algorithm to construct a cut-tree generated by Gomory-Hu algorithm. The algorithm only requires node sets defined by the minimal cut in each of the (n-1) maximal flow determinations. Merging computerized facility layout procedure that uses cut-tree concept to generate design skeletons with our algorithm requires less storage space than merging it with Gomory-Hu algorithm. Also, the cut-tree can easily be modified when the (n-1) minimal cut-sets are updated due to changes on arc capacities.

  • PDF

콘크리트용 혼화제의 동결온도에 관한 실험적 연구 (An Experimental Study on the Freezing Temperature of Admixture Agent for Concrete)

  • 한경익;이건철;이진규;윤기원;한천구
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1996년도 봄 학술발표회 논문집
    • /
    • pp.48-51
    • /
    • 1996
  • Recently, frost damage of storage tank for admixture agent caused by low temperature in winter and quality deterioration of admixture agent ofen happened. But, many problems are caused because of no applicable regulations of admixture agent facility and so on. Therefore, this study presents the reference data about using and quality control of admixture agent in practice and the judgement data about working out a counter plan of suitable heat insulation of injecion equipment of admixture agent exposed at outside in winter by measuring the freezing point of admixture agent for concrete.

  • PDF

사례추론에 의한 S/C 이상진단에 관한 연구 (Study on Trouble Diagnosis of Stacker Crane by Case Base Inference)

  • 김동훈;송준엽
    • 연구논문집
    • /
    • 통권25호
    • /
    • pp.99-104
    • /
    • 1995
  • At present, a lot of researches on AS/RS(Automatic Storage and Retrival System) are being performed and also applied to realization of FA, FMS and CIM. Especially facility management and diagnosis of stacker crane that is major equipment of AS/RS, is recognized more importantly. In this paper, Case Base is designed for manager that is non-expert and it is implemented according to possible trouble case for the purpose of trouble diagnosis and maintenance of stacker crane.

  • PDF

저온저장고의 뉴로-퍼지 제어시스템 개발 (Development of Neuro-Fuzzy Control System for Cold Storage Facility)

  • 양길모;고학균;홍지향
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 2002년도 하계 학술대회 논문집
    • /
    • pp.176-181
    • /
    • 2002
  • 국내 저온저장고의 문제점은 재래식 제어방식과 냉각방식으로 인한 온도분포의 불균일과 시스템 성능 저해, 청과물의 생리적인 특성을 고려하지 알은 냉기의 유속과 습도제어, 청과물의 저온저장 중 발생되는 환경가스 제거기술의 미흡으로 인한 땀은 감모율 발생 그리고 청과물의 생리적인 특성을 고려하지 않은 저온저장고의 최적 설계기술 미흡 등을 들 수 있다. (중략)

  • PDF