• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.879-884
• /
• 2007

Flywheel energy storage systems have advantages over other types of energy storage devices in such aspects as unlimited charge/discharge cycles and environmental friendliness. In this paper we propose a millimeter scale flywheel energy storage device. The flywheel is supported by a pair of passive magnetic bearings and rotated by a toroidally wound electric motor/generator. The geometry of the bearings is optimized for the maximum dynamic performance.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.212-214
• /
• 2007

Regenerative energy which is generated during brake periods of DC traction might cause malfunction or destruction of rectifier or any other power conversion devices caused the increment of DC line voltage. Regenerative energy storage system using super-capacitor is one of the method to control the DC line voltage safely. And super-capacitor is very important device as energy storage device. Therefore, In this paper, we designed the regenerative energy storage system using super-capacitor and propose the method about predicting the lifetime of super-capacitor established in storage system. According to the this research, we can estimate the proper replacement moment for the existed super-capacitor due to the safety of the system. And improve the reliability of regenerative energy storage system using super-capacitor.

• ETRI Journal
• /
• v.7 no.2
• /
• pp.26-33
• /
• 1985

본고는 교환기에 사용되는 각종 I/O device를 분류한 후 일반적인 I/O device의 처리방식을 서술하였으며, ANSI에서 개발한 이들 방식의 implementation technique를 TDX-1 시스팀의 storage architecture에 적용시키는 방안을 제시하였다.

• Korean Institute of Interior Design Journal
• /
• no.15
• /
• pp.86-93
• /
• 1998

An Apartment Veranda is a transitive space which is being used for many different purpose. A Rear Veranda which is connected to the kitchen is an important space for the housekeeping work and it should be planned carefully to reflect the rational and functional designs. Therefore the objective of this research is to suggest a systematic basis for the practical space planning of the Rear veranda that meets the varied needs of consumers by examining its usage pattern through the analysis of the apartment occupant's behavior pattern stored item the degree of satisfaction and consumer requirements. The research was conducted mainly on apartments built after 1990. The following are the conclusions from the research : 1. Most of the research respondents were aware of the absolute need for the Rear veranda. But they expressed dissatisfaction with the space usage. This indicates that the Rear Veranda planning does not reflect the functionality of the space and concentrates on the idea of providing consumers a service space based on the size of the apartment instead. 2. Although the Rear veranda is used as the multipurpose housework space it is mainly used as the laundry and storage space. This shows a big deviation from the concept of the utility space. Because the behavior pattern associated with the Rear Veranda is largely influenced by the traditional life pattern the development of the Rear Veranda as an exclusive space for the housekeeping work. 3. According to a high frequency of the storage of the laundry related item in the Rear Veranda indicated by the research the Rear veranda is used as the laundry room as well as a auxiliary storage space by most people. The installation of gas range is expected to increase due to the expansion of the usage function of the Rear Veranda space. The installation of a specialized refrigerator to store the traditional food is demanded. 4. Consumers need more efficient and functional storage device because the temporary shelves are often being used as the storage device. The perception of the storage device is assumed to have been influence by the traditional life style.

• Journal of Internet of Things and Convergence
• /
• v.10 no.2
• /
• pp.125-130
• /
• 2024

With the rapid growth of mobility technology, the industrial sector is demanding storage devices that can reliably process data from various equipment and sensors in vehicles. NAND flash memory is being utilized as a storage device in mobility environments because it has the advantages of low power and fast data processing speed as well as strong external shock resistance. However, flash memory is characterized by data corruption due to long-term exposure to high temperatures. Therefore, a dedicated system for temperature management is required in mobility environments where high temperature exposure due to weather or external heat sources such as solar radiation is frequent. This paper designs a dedicated temperature management system for managing storage device temperature in a mobility environment. The designed temperature management system is a hybrid of traditional air cooling and water cooling technologies. The cooling method is designed to operate adaptively according to the temperature of the storage device, and it is designed not to operate when the temperature step is low to improve energy efficiency. Finally, experiments were conducted to analyze the temperature difference between each cooling method and different heat dissipation materials, proving that the temperature management policy is effective in maintaining performance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.6
• /
• pp.445-449
• /
• 2020

Non-volatile memory is approaching its fundamental limits with the Si₃N₄ storage layer, necessitating the use of alternative materials to achieve a higher programming/erasing speed, larger storage window, and better data retention at lower operating voltage. This limitation has restricted the development of the charge-trap memory, but can be addressed by using high-k dielectrics. The paper reviews the doping of nitrogen, titanium, and yttrium on high-k dielectrics as a storage layer by comparing MONOS devices with different storage layers. The results show that nitrogen doping increases the storage window of the Gd₂O₃ storage layer and improves its charge retention. Titanium doping can increase the charge capture rate of HfO₂ storage layer. Yttrium doping increases the storage window of the BaTiO₃ storage layer and improves its fatigue characteristics. Parameters such as the dielectric constant, leakage current, and speed of the memory device can be controlled by maintaining a suitable amount of external impurities in the device.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.111-114
• /
• 2017

As digital contents are widely used and require increasingly high quality, the data storage services over Internet also become more and more important. One of popular services, web-hard, provides lots of users with web-based functions for data storage, management and sharing but such storage utilization requires quite high cost compared to using portable storage devices. Moreover, some users may avoid putting their important data into open Internet area. On the other hand, portable storage devices are cheaper but can be used only when they are physically connected to host devices such as PC. Also additional management and security functions should be equipped to support data sharing among users. In this paper, we propose a web-based data storage system combining those advantages of aforementioned two approaches. The proposed system immediately provides web-based services for data management and sharing when a portable device such as SDD is connected to the server.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.1
• /
• pp.30-37
• /
• 2002

A focusing grating coupler (FGC) was not fabricated by the 'Continuous Path Control'writing strategy but by an electron-beam lithography system of more general exposure mode, which matches not only the address grid with the grating period but also an integer multiple of the address grid resolution (5 nm). To more simplify the fabrication, we are able to reduce a process step without large decrease of pattern quality by excluding a conducting material or layer such as metal (Al, Cr, Au), which are deposited on top or bottom of an e-beam resist to prevent charge build-up during e-beam exposure. A grating pitch period and an aperture feature size of the FGC designed and fabricated by e-beam lithography and reactive ion etching were ranged over 384.3 nm to 448.2 nm, and 0.5 $\times$ 0.5 mm$^2$area, respectively. This fabrication method presented will reduce processing time and improve the grating quality by means of a consideration of the address grid resolution, grating direction, pitch size and shapes when exposing. Here our investigations concentrate on the design and efficient fabrication results of the FGC for coupling from slab waveguide to a spot in free space.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.594-596
• /
• 2022

This paper relates to a system for pre-processing high-definition images acquired through a camera mounted on an unmanned aerial vehicle(UAV) and transmitting them to a server through a mobile communication network. In the case of the existing UAV system for image acquisition service, the acquired image was stored in the external storage device of the camera mounted on the UAV, and the image was checked by directly moving the storage device after the flight was completed. In the case of this method, there is a limitation in that it is impossible to check whether image acquisition or pre-processing is properly performed before directly checking image data through an external storage device. In addition, since the data is stored only in an external storage device, there is a disadvantage that data sharing is cumbersome. In this paper, to solve the above problems, we propose a system that can remotely check images in real time. Furthermore, we propose a system and method capable of performing pre-processing such as geo-tagging and transmission through a mobile communication network in addition to image acquisition through shooting in an UAV.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.689-692
• /
• 2000

This paper presents a designing for the Off-line UPS usig SMB Flywheel Energy Storage System. This described flywheel energy storage system is designed to replace of the conventional EMB(Electro Mechanical Battery) system. To realize the high efficiency and to minimize the torque ripple the waveform of the inverter output current is controlled to be sinusoidal. The actual performance of the Off-line UPS using flywheel energy storage system is described. The prototype device was manufactured, The experimental result has good characteristics at a time of power transition region and regeneration modes,