• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.235-242
• /
• 2012

In recently constructed building, It has become fashionable again that the heavy external skin system such as a Stone Finished Envelope. There are Squared Steel Pipe Methods, C-Shaped Steel Pipe Methods, and Aluminum Beam Methods in the structure of a heavy external skin system. The Aluminum Beam Methods is often misunderstood as a Plane Truss Structure, but this method is not appropriate to be called to a truss structure but a beam methods. The Aluminum Beam Methods is the most Eco-friendly methods in terms of Quality assurance, Efficiency, Safety, Construction period, Durability, and Recyclability. And this Methods is also very appropriate in considering the point of Energy conservation, Waste reduction, Long-life architecture, Replacement parts, Environmental protection, Public efficiency, and Building demolition.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.879-882
• /
• 1997

This paper aims to clarify the effect of the sol-gel sintered alumina grain and the PbO content of binder on the performance of the vitrified alumina stone for superfinishing the ball bearing race with the vitrified alumina superfinishing stone. The main conclusions obtained were as follows. The stone that contain 8- 11% PbO in binder shows the highest grinding ratio, and increasing or decreasing the PbO contents causes lower grinding ratio. When superfinishing with the stone using the 45% fused alumina and 55% sol-gel sintered alumina grain, the grinding ratio becomes the best, the other ratio of grain contents shows lower performance. With increasing the bending strength of stone, the grinding ratio becomes larger. The roughness of the finished surface is the lowest in case of using the stone of the above mentioned conditions.

• 한국의류학회지
• /
• 제47권6호
• /
• pp.1177-1192
• /
• 2023

This study aims to expand the scope of use for relics by applying the patterns and characteristics of embroidered fabric pieces, such as gold foil, excavated from the Mireuksa Temple Site in Iksan for fashion products. The artifact was a ra decorated with flower and vine patterns, embroidery using gold and red thread, and the unique stitching of Baekje. The pattern was reconstructed, as the embroidery was not well-preserved. This study used two types of gold-foil techniques: laser-cut and stone-stamp gold foil. Considering practicality, the gloss, toughness, custom production possibility, and design implementation were emphasized. The form of the laser-cut gold foil could be transformed; however, a recognition problem with the machine increased the thickness of the stitching. It was used for half-finished goods and commercial casual fashion. The stone-stamp gold foil was finely implemented, but the design was difficult to change. It was used for half-finished silk fabric for making hanbok po and lattice-patterned silk skirts. Applying the developed gold foil to suitable clothing can further enhance the effect.

• Restorative Dentistry and Endodontics
• /
• 제11권1호
• /
• pp.11-18
• /
• 1985

The purpose of this study was to observe the facial, lingual and gingival walls of the cavity walls with various kinds of cutting tools. Class II cavities were prepared in newly extracted sound humen mandibular 1st left premolars, and observed in Sanning electron microscope. Diamond point (#201) and Tungsten Carbide burs (#170L) were used in ultra high speed handpieces (rpm 200000), and Tungsten Carbide bur (#702) and Steel bur (#560) were used in conventional handpieces (rpm 6000). All cavities were prepared under water spray, except for some which were finished with a dry abrasive stone (#57). Some cavities were finished with chisels (#41, 42, 83). The following results were obtained. 1. The cavity walls prepared with Diamond point were rougher than the cavity walls with Carbide burs and Steel burs. 2. The chisels were produced the smoothest surface. 3. The cavity walls which were prepared with cutting blades rotated toward enamel surface from outside, were smoother than cavity walls which were prepared with cutting blades rotated toward outside from the enamel surface.

• Restorative Dentistry and Endodontics
• /
• 제8권1호
• /
• pp.97-106
• /
• 1982

The purpose of this study was to evaluate the effect of different polishing procedures on the surfaces of composite resins. Two-paste type comosite restorative resin (Hipol) was selected for this study. 70 cavities prepared on the plaster-stone dies, 6mm in diameter and 2mm in depth, was filled with composite resin according to the manufacturer's specifications and by polymerizing against mylar strips. The polymerized composite resin specimens were polished (surface finished) by using 6 polishing devices; white stones, diamond finishing points, 12-fluted carbide finishing burs, green stones, sand paper disks, and Quasite rubber disk after polished with sand paper disks and green stones. A profilometer (Bendix type) was used to record in microinches the surface roughness of each surface finished composite resin specimens. The results were as follows. 1. The best finished surface that can be obtained is a surface formed by the mylar matrix strip 2. The white stones produced the smoothest surface in the experimental group. 3. The green stones produced the roughest surface in the experimental group. 4. It was proved that the gradual use of finishing instruments from a rough one to fine ones reduced the surface roughness.

• 건축역사연구
• /
• 제26권2호
• /
• pp.7-14
• /
• 2017

Rafter is a member for roof and plays a role in protecting shaft members under rafter such as pillar, beam and girder from natural environment and to fix by supporting finished materials of roof. It is common in the Korean architecture that rafter cross-section is paired with circular form and Buyeon cross-section is paired with the square shape. However, while there are not many, some architectures have rafter end header in the square shape. The aim of this study is to examine the square shape cases of rafter end header with special reference to stone structure. As a result, among stone structure related to Bangyeon, the majority case is seen at Palgakwondang type Seungtap. It was shown in the Seungtap of monk of Gusanseonmun school in the later Unified Silla to the early Goryeo period that succeeded Seodang Jijang.

• Journal of Mechanical Science and Technology
• /
• 제15권12호
• /
• pp.1762-1767
• /
• 2001

The Posuk-Chung Pavilion if a defunct irregular stone water channel in Kyongju, Korea, once used for the meandering stream feast'by kings of Silla Dynasty during the first millennium. The poets were seated around this stone water channel who composed the Chinese poems, overlooking the streams. They load to take the punishment drinks unless they finished the poem before the drifting cup filled with the rice wine arrived at their seats on the meandering stream. In this paper, we have made computer simulation as well as well as model experiment on the ancient meandering stream of the Posuk-Chung Pavilion. The computational results are compared with the experiment and the channel flow characteristics are delineated here. It is discussed how the present Posuk-Chung channel is morphologically distinguished from the Chinese and Japanese meandering streams.

• 지구물리
• /
• 제6권2호
• /
• pp.71-77
• /
• 2003

Generally the dynamic characteristics of stone wall structures depend on several factors such as contact, the type of interlocking bonding stones, and the filling materials. This paper describes a non-destructive technique for diagnosis of historic masonry stone structures using the measurement of natural frequency technique. For this purpose, the castle wall of Nag-An Folk Town located in Sunchon, Korea was selected as a model. The Nag-An Town Castle is one of the well maintained historical remains constructed in the Chosun Kingdom of Korea. The construction started in 1397 A.D and was finished in 1626 A.D. The non-mortar castle wall is 1470m long and the average height is 4m with a width of 3 4m. The exterior of the wall is bonded with 1 2 m rectangular rough-faced stone and the inside of the wall is filled with gravel. The traditional village still remains inside the Nag-An Town Castle, and they have a regional food festival every October. Transverse vibrations were measured at 8 points around the castle. The measured natural frequency of the first mode was 26Hz 41Hz, and the shear modulus of filling material was 2.142 x $10^3$ ~ 8.915 x $10^3$kgf/$cm^2$ . With these results, it may be assumed that the filling material is gravel or a sand-gravel mixture. It is expected that the information provided by this paper will be useful for addressing the maintenance problems of the old castle walls.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제12권4호
• /
• pp.8-15
• /
• 2007

본 연구에서는 석분과 하수준설토에 지반물성시험과 토양환경오염 우려기준에 의거한 오염도 측정을 실시하였다. 실험 결과 하수 준설토는 모래가 $70%{\sim}80%$의 비율의 사질계열의 흙으로써 건축 토목공사의 골재재료로써 가치가 크다는 것이 판명되었다. 석분은 세립분의 함량이 큰 관계로 건설재료로 좋은 품질을 보이지는 않았으나 폐광, 석산에서 석재 채취 후 빈 공간 등을 채우는 용도에 적용시킨다면 재활용이 가능한 것으로 나타났다. 유해물질 함유량은 두 시료 모두 토양오염우려기준에 훨씬 못 미치는 수치로서, 재활용시 토양오염에는 거의 영향이 없는 것으로 나타났다.

• 한국의류학회지
• /
• 제21권5호
• /
• pp.922-932
• /
• 1997

Blue jeans are finished with stonewashing process to give it optimal softness and color contrast of blue and white. So, Yellowing may well be generated during storage or use and thereby, their appearance may be damaged much. So, this study was aimed at finding the solutions to reduce the yellowing problem caused by residual metals after stonewshing. To this end, sample blue jeans were made to be finished with various methods of wet-treatment and then, be subject to daylight to check their photoyellowing. The results of this test can be summarized as follows; Since the stonewashing process was found to affect the yellowing, the residual metals of stone- washed blue jeans was analyzed. And it was found that it contained such residual metal as Al, Ca, Cu, Ti, Si, K and Zn. In particular, it was conceived that Al was a prime cause affecting the yellowing. Meanwhile, when the blue jeans were treated by the metal ionchelating agent of EDTA-2Na, the residual levels of Al and Ti were reduced by about 50%, while the photoyellolving was lowered by 75%, which is suggesed that EDTA is very effective in preventing the yellowing. On the other hand, when the blue jeans were bleached by the hypochlorite, chlorine remained in blue jean accelerated the yellowing. However, when this blue jean was treated again by the sodium thiosulfate for its dechloridization, the residual of chlorine was reduced, and the yellowing was lowered by about 43%.