• 한국산학기술학회논문지
• /
• 제18권11호
• /
• pp.762-769
• /
• 2017

준등방성 라미네이트내의 확장강성 계수는 방사방향으로균일하지만, 굽힘강성 계수는 플라이 적층순서에 의해 방사방향으로 변화한다. 이 논문에서는 복합재 광학에서 사용되는 단방향섬유 복합재료와 무작위로 분포된 단섬유 복합재료로 이루어진 세 가지 유형의 준 등방성 라미네이트 반사경내의 굽힘강성 계수의 방사방향의 변화량을 비교하였다. 단섬유 복합재료 반사경 방사방향의 확장강성 계수와 굽힘강성 계수는 균일하게 나타나는 반면, 단방향섬유 복합재료 반사경의 경우에는 굽힘강성 계수의 방사방향으로의변화량이 11%에서 많게는 26%까지 변화하는 것으로 나타났다. 또한 강성계수의 차이로 인한 굽힘-비틀림-커플링 효과 등 강성 민감도 또한 큰 것으로 나타났다. 이러한 요소는 정밀성이 요구되는 광학분야에 복합재 반사경의 적용을 어렵게 할 커다란 문제점으로 인식되며, 이러한 복합재료의 이방성 성질로 인한 필연적인방사형 방향으로의 강성계수의 변화 및 그 영향성을 줄이기 위해서는 단섬유나 무작위로 공간에 흩어져있는 섬유 복합재료를 사용하는 것이 복합재 반사경내에 존재하는 굽힘강성 계수의 변화를 제거하는 하나의 방법이다.

• 한국소음진동공학회논문집
• /
• 제18권2호
• /
• pp.247-254
• /
• 2008

Resilient materials are generally used for the floating floors to reduce the floor impact sound. Dynamic stiffness of resilient material, which has the most to do with the floor impact sound reduction. The resilient materials available in Korea include EPS(styrofoam), recycled urethane types, EVA(ethylene vinylacetate) foam rubber, foam PE(polyethylene). glass fiber & rock wool, recycled tire, foam polypropylene. compressed polyester, and other synthetic materials. In this study, we tested dynamic stiffness of resilient material and floor impact sound reduction characteristic to a lot of kinds of resilient materials. It was found that dynamic stiffness of multi-layered damping material could be estimated if know value of each layer that compose whole structure. And the test showed that the amount of the heavy-weight impact sound reduction appeared by being influenced from this dynamic stiffness of resilient material. The dynamic stiffness looked like between other resilient materials, a similar to the amount of the heavy-weight impact sound reduction was shown.

• 한국소음진동공학회논문집
• /
• 제22권11호
• /
• pp.1144-1151
• /
• 2012

A damage in structure alters its dynamic characteristics. The change is characterized by changes in the modal parameter, i.e., modal frequencies, modal damping value and mode shape associated with each modal frequency. Changes also occur in some of the structural parameters; namely, the mass, damping, stiffness matrices of the structure. In this paper, evaluation of changes in stiffness matrix of a structure is presented as a method not only for identifying the presence of the damage but also locating the damage. It is shown that changed stiffness matrix can be accurately estimated a sensitivity coefficient matrix derived from modifying mode shapes, First, with 4 story shear structure models, the effect of presence of damage in a structure on its stiffness matrix is studied. By using these analytical model, the effectiveness of using change of stiffness matrix in detecting and locating damages is demonstrated. To validate the predicted changing stiffness and its location, the obtained results are compared to the reanalysis result which shows good agreement.

• 한국포장학회지
• /
• 제7권1호
• /
• pp.9-15
• /
• 2001

Top-to-bottom compression strength of corrugated fiberboard boxes is partly dependent on the load-carrying ability of the central panel areas. The ability of these central areas to resist bending under load will increase the stacking strength of the box. The difference of box compression strengths, among boxes which are made with identical dimensions and fabricated with same components but different flute sizes, is primarily due to difference of the flexural stiffness of the box panels. Top-to-bottom compression strength of a box is accurately predicted by flexural stiffness measurements and the edge crush test of the combined boards. This study was carried out to analyze the flexural stiffness, maximum bending force and maximum deflection for various corrugated fiberboards by experimental investigation. There were significant differences between the machine direction (MD) and the cross-machine direction (CD) of corrugated fiberboards tested. It was about 50% in SW and DW, and $62%{\sim}74%$ in dual-medium corrugated fiberboards(e.g. DM, DMA and DMB), respectively. There were no significant differences of maximum deflection in machine direction among the tested fiberboards but, in cross direction, DM showed the highest value and followed by SW, DMA, DMB and DW in order. For the corrugated fiberboards tested, flexural stiffness in machine direction is about $29%{\sim}48%$ larger than cross direction, and difference of flexural stiffness between the two direction is the lowest in DMA and DMB.

• 대한치과교정학회지
• /
• 제22권3호
• /
• pp.591-602
• /
• 1992

The purpose of this study was to evaluate the effect of heat treatment on physical properties of 0.016' and 0.016' x 0.022' stainless steel wires. Temperature of heat treatment had intervals of $50^{\circ}C$ from $400^{\circ}C$ to $700^{\circ}C$, and time of heat treatment were 3, 6 and 9 minutes. Tensile tests were measured by ultimate tensile strength and yield strength. Bending tests were assessed by maximum bending force, recovery force, and stiffness. Torsion test was evaluated by torsion cycle until wires were fractured. The results were as follows: 1. In round wires, the highest value of ultimate tensile strength and yield strength were recorded of heat treatment at $500^{\circ}C$. In rectangular wires, the highest value of ultimate tensile strength were after 9 minutes at $400^{\circ}C,\;450^{\circ}C$ and 3, 6 minutes of heat treatment at $50^{\circ}C$, yield strength were the highest value after 3, 6 minutes of heat treatment at $500^{\circ}C$. 2. In both round and rectangular wires, maximum bending force and recovery force were the highest values after 6 minutes of heat treatment at $500^{\circ}C$. In round wires, highest value of stiffness were formed after 9 minutes at heat treatment at $500^{\circ}C$. In rectangular wires, the highest value of stiffness were for 6 minutes in $500^{\circ}C$. 3. In rectangular wires, torsion cycle was minimum after 6 minutes of heat treatment at $500^{\circ}C$. 4. In all of tension, bending, and torsion tests, the heat treated wires were softened over at $700^{\circ}C$. 5. In all of tension, bending, and torsion tests, physical properties of the wires were more influenced by the temperatures than the duration of the heat treatment.

• 한국생활과학회지
• /
• 제16권5호
• /
• pp.979-986
• /
• 2007

The purpose of this study is to investigate the dyeability, and the hand of soybean/cotton blended fabric after dyeing with natural and synthetic dyes. Soybean/cotton blended fabrics dyed with extracted solution from turmeric, sappan wood, gardenia and synthetic dyes(weak-acid dyes, reactive dyes, direct dyes). The hand value of soybean/cotton blended fabrics dyed with 6 different dyes was measured using Kawabata Evaluation System. The results are as follows; 1. The K/S value of the soybean/cotton blended fabric dyed with sappan wood extracts was the highest. 2. The color fastness of the soybean/cotton blended fabric dyed with reactive dyes was excellent. The fastness to the light of the same fabric was much better than the other fabrics. 3. Linearity of load-extension and tensile energy of the soybean/cotton blended fabric dyed with sappan wood extracts showed very high. Shear stiffness of the soybean/cotton blended fabric dyed with weak-acid dyes was much higher than that of fabric of dyed with reactive dyes. Bending property of the fabrics dyed with natural colorants(sappan wood, gardenia) showed very high, but that the fabric dyed with reactive dyes was very poor. 4. In the primary hand value, stiffness and anti-drape stiffness of the fabric dyed with weak-acid dyes showed the highest. Fullness and softness of the fabric dyed with weak-acid dyes showed very low.

• 한국철도학회논문집
• /
• 제15권2호
• /
• pp.147-153
• /
• 2012

철도교량과 같이 주기적 가진에 의해 공진발생의 가능성이 높은 구조물에 있어서, 정확한 구조물의 동적거동 분석은 설계단계 및 공용중 안정적인 응답을 확보하기 위해 필수적이다. 특히, 콘크리트궤도는 강성기여와 질량기여를 통해 철도교량의 동특성을 변화시킬 수 있음에도 불구하고 일반적으로 철도교량 동적해석 시 질량으로만 고려되어진다. 본 연구에서는 실제 콘크리트궤도가 부설된 거더시험체를 제작하여 철도교량의 정 동적거동을 분석하였다. 또한, 궤도질량만을 고려한 경우와 궤도강성을 고려한 수치해석을 통해 중립축 위치와 고유진동수를 실험치와 비교 분석하였다. 이를 통해 콘크리트궤도 부설 철도교량의 경우 정량적인 산정이 가능한 콘크리트궤도의 강성과 질량을 고려한 해석값이 실험값과 근사한 결과를 얻을 수 있음을 확인하였다. 따라서 본 연구에서는 콘크리트궤도 부설 철도교량에 대한 동적설계 및 동적안정성 분석 시 콘크리트궤도의 강성과 질량을 함께 고려할 것을 제안하였다.

• Structural Engineering and Mechanics
• /
• 제65권5호
• /
• pp.547-556
• /
• 2018

Based on the shaking table tests of a 1:3.52 scale one-bay and one-story ancient wooden structure, a simplified structural mechanics model was established, and the structural state equation and observation equation were deduced. Under the action of seismic waves, the damage rule of initial stiffness and yield stiffness of the joint was obtained. The force hammer percussion test and finite element calculations were carried out, and the structural response was obtained. Considering the 5% noise disturbance in the laboratory environment, the stiffness parameters of the mortise-tenon joint were identified by the partial least squares of singular value decomposition (PLS-SVD) and the Extended Kalman filter (EKF) method. The results show that dynamic and static cohesion method, PLS-SVD, and EKF method can be used to identify the damage degree of structures, and the stiffness of the mortise-tenon joints under strong earthquakes is reduced step by step. Using the proposed model, the identified error of the initial stiffness is about 0.58%-1.28%, and the error of the yield stiffness is about 0.44%-1.21%. This method has high accuracy and good applicability for identifying the initial stiffness and yield stiffness of the joints. The identification method and research results can provide a reference for monitoring and evaluating actual engineering structures.

• 한국전산구조공학회논문집
• /
• 제23권2호
• /
• pp.165-173
• /
• 2010

본 논문에서는 비동질 탄성무한공간에 대한 비례경계유한요소법의 동적강도행렬을 해석적으로 유도하였다. 해석영역의 비동질성은 비동질파라메터를 지수로 하는 멱함수로 고려하였다. 동적강도행렬은 진동수영역에서 다항식으로 점근전개한 후, 방사조건을 만족시키도록 하여 각 다항식의 계수를 구하는 과정을 통하여 유도되었다. 얻어진 동적강도행렬의 타당성을 검증하기 위해 정확해가 알려져 있는 대표적인 문제에 대하여 비동질파라메터의 값을 변화시키면서 수치해석을 수행하였다. 그 결과 유도된 동적강도행렬이 비동질공간에 대한 특성을 적절하게 반영하는 것으로 나타났다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.385-392
• /
• 2001

The stiffness of pavement is scarcely considered in structural analysis of the superstructure bridge. It will be reasonable in the case of asphalt concrete pavement over concrete deck plate because stiffness of the pavement compared with concrete deck plate can be ignored. Additionally, it is considered correct to do a design with a safety. However, various pavement materials which have even value reaching to the elastic modulus of concrete are applied to the orthotropic steel deck plate which has a relatively less stiffness comparing with the concrete deck plate. In this paper, the steel plate deck of the bridge of real project was modeled considering the pavement stiffness for the FEM analysis and the linear elastic analysis was performed. It was assumed to be perfectly bonded between the steel plate deck and the pavement and the temperature effect was ignored. It was analyzed on the vertical deflection of steel deck plate influencing to the serviceability of pavement and the bending stress of steel deck plate related to the fatigue life. As a result, It was indicated that the structural behavior of the orthotropic steel deck plate could be affected by the stiffness of pavement in some cases.