• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.111.4-111
• /
• 2001

In this paper, an adaptively tuned dynamic absorber is proposed. The adaptively tuned dynamic absorber is a dynamic absorber whose stiffness is tuned so that the natural frequency of the absorber coincides with the operating or natural frequency estimated by an adaptive algorithm. The feature of this absorber is as follows. It has an electrodynamic device for the stiffness control. Using Lorenz´s force, it changes the stiffness by changing the applied current. The change of stiffness results in the natural frequency shift, because its mass and damping coefficient are fixed. We may reduce the vibration of the overall system by tuning the natural frequency of the dynamic absorber to the resonant frequency of the structure, when the dominant single tone oscilation occurs in the system ...

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.404-411
• /
• 2007

Reinforced roadbeds are valued from the point of view of maintenance as well as enhanced mechanical capacity. They support more train load and less transmit to the sub-layers than general roadbeds. Also, the lateral sloping surface of the reinforced roadbed and its low permeability, achieved by the controlled compaction, increase drainage capability and prevent the softening of sub-layers. In the study, a series of cross-hole tests was performed to observe the temporal changes in the stiffness of reinforced roadbeds, if any, due to the cyclic loading of trains and alternating rainy and frozen seasons at Pyeong-taek experimental site. The three types of reinforced roadbed materials are slag, crushed stones, and soils, and the thickness of all the reinforced roadbeds is 0.8m. The stiffness of the slag and soil reinforced roadbeds was not changed or slightly decreased. The stiffness of the crushed stone was somewhat increased and is inferred to being densified close to surface.

• 한국기계가공학회지
• /
• 제8권3호
• /
• pp.98-104
• /
• 2009

The objective of this paper is to investigate the effect of factors on the dynamic stiffness variation of boring bar. The experiment was carried out by Taguchi Method and Orthogonal array table. The results indicate that overhang was found out to be dominant factor with 95% confident intervals and feed rate and depth of cut were insignificant. In addition, analysis of loss function shows that loss value increased sharply from 3D to 4D(D is a shank diameter). Consequently, there is critical point which changes property of dynamic stiffness.

• Structural Engineering and Mechanics
• /
• 제33권3호
• /
• pp.325-337
• /
• 2009

Structural damage detection, damage localization and severity estimation of jacket platforms, based on calculating modal strain energy is presented in this paper. In the structure, damage often causes a loss of stiffness in some elements, so modal parameters; mode shapes and natural frequencies, in the damaged structure are different from the undamaged state. Geometrical location of damage is detected by computing modal strain energy change ratio (MSECR) for each structural element, which elements with higher MSECR are suspected to be damaged. For each suspected damaged element, by computing cross-modal strain energy (CMSE), damage severity as the stiffness reduction factor -that represented the ratios between the element stiffness changes to the undamaged element stiffness- is estimated. Numerical studies are demonstrated for a three dimensional, single bay, four stories frame of the existing jacket platform, based on the synthetic data that generated from finite element model. It is observed that this method can be used for damage detection of this kind of structures.

• 한국임상수의학회지
• /
• 제20권4호
• /
• pp.482-488
• /
• 2003

Transplanted cortical bone grafts of freeze-dried bones also function as sustaining for defected bones, however, it has less strength and is fragile without rehydration. In this study, strength and stiffness of freeze-dried bone from bovine cortical bones were evaluated by three point bending test according to different time frames such as rehydration times of 0.5, 3, 6, 12 and 24 hrs in electrolyte solution and was compared with those of frozen bones. The strength and stiffness of frozen bone were $264.4\pm36.7$ MPa, $17.0\pm1.5$ GPa, respectively. The strength and stiffness of freeze-dried bone which fat was removed by treatments of chloroform-methanol solutions for 6 days, then was freeze-dried at $-80^{\circ}C$ and sterilized with ethylene oxide gas, were $224.9\pm27.6$ MPa, $19.2\pm2.8$ GPa, respectively. The strength and stiffness of feeze-dried bone were decreased 15.0% and increased 13.2% than these of frozen bone, respectively. The strength and stiffness of freeze-dried bone rehydrated for 6 hrs were restored to 96.0% strength and 99.2% stiffness of frozen bone. The rehydration time of freeze-dried bone which had the highest strength and stiffness was six hours and three hours, respectively. The results of the mathematica program for the variation of the strength and stiffness showed 3 hours and 30 minutes of rehydration time in electrolyte solution for the best condition in the strength and stiffness which was adequate to treat freeze-dried cortical bone.

• 대한의용생체공학회:의공학회지
• /
• 제30권2호
• /
• pp.129-134
• /
• 2009

The ideal method which measures a blood vessel of senility and degree of arteriosclerosis is to measure compliance of arterial and condition of blood circulation at the periphery. In these days vascular stiffness have been assessed by analyzing PTT (pulse transit time) from ECG and PPG. PTT is that between toe and finger each subject estimated through ECG and PPG signals. Two parameters, which are related to PWV, were tested with the time delay between the finger and toe. PWV is a variation of quantity which is associated with vascular stiffness. These researches which use PTT and PWV don't consider the blood vessel characteristic of an individual. In this current research, we have used with the blood vessel characteristic of an individual. That is an assessment of vascular stiffness using the variation of quantity in PWV with the changes of position in the subject. PWV variation increased as functions of the subject's age. The increase of the PWV variation parameters with age is attributed to the direct decrease of the blood vessel compliance with different position. The quantity of variation estimated by experimental results is that old age's (75.78${\pm}$7.75) case is 113.68% and young age's (26.47${\pm}$2.04) case is 85.69%. We proved and presented about estimation of vascular stiffness of possibility by this result.

• 한국의상디자인학회지
• /
• 제16권1호
• /
• pp.15-25
• /
• 2014

The purpose of this study is to recognize the differences of visual evaluation by variations in width of hem line and waistline position of the bell buttom pants. The stimuli are 9 samples: One control group, 3 variations of the width of hem line and 3 variations of the waistline position. The data has been obtained from 56 fashion students. The data has been analyzed by Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of the study are as follows: The visual evaluation by the width of hem line and waistline position of bell buttom pants are composed of 5 factors : comfort, personality, physical characteristics, stiffness and modern. Among these factors, the comfort is evaluated to be the most important factor. As a visual evaluation result of changes in the width of hern line, 62cm in width (the narrowest width) was highly evaluated in comfort and stiffness factors, 78cm in width (the widest width) was highly evaluated in personality and physical characteristics factors. For the result of changes in the waistline position, high-waisted bell buttom pants were was highly evaluated in personality and stiffness factors, low-waisted bell buttom pants were was highly evaluated in comfort, physical characteristics and modern factors. The width of hem line and waistline position of the bell buttom pants interacted to the comfort factor. The width of hem line had more influence on visual evaluation in personality factors while physical characteristics, stiffness and modern factors were affected by the waistline position.

• 한국강구조학회 논문집
• /
• 제26권2호
• /
• pp.133-142
• /
• 2014

상 하부 T-stub 접합부는 보와 기둥의 강성비, T-stub의 기하학적 형상변화, 긴결재의 개수, 패널존 효과 등의 영향에 따라서 보통모멘트골조 및 특수모멘트골조에 적합한 거동특성을 나타내는 완전강도 부분강접 접합부(full strength partial restrained connection)이다. 이러한 상 하부 T-stub 접합부가 구조적으로 안전하게 거동하기 위해서는 충분한 강도, 강성, 연성능력을 나타내어야 한다. 이 연구는 T-stub의 기하학적 형상변화가 상 하부 T-stub 접합부의 모멘트-회전각 관계에 미치는 영향을 파악하고, 이에 따른 상 하부 T-stub 접합부의 초기회전강성을 평가하기 위해 진행하였다. 이를 위하여 T-stub의 기하학적 형상변수 ${\alpha}^{\prime}$값을 변화시킨 2개의 상 하부 T-stub 접합부 실험체를 제작하여 접합부 실험을 수행하였고, 3차원 비선형 유한요소해석도 수행하였다.

• Journal of Ginseng Research
• /
• 제44권5호
• /
• pp.738-746
• /
• 2020

Background: Red ginseng contains components, including microelements, vitamins, essential oils, and fatty acids, that can be used in skincare to delay the aging process. We investigated the effects of red ginseng treatment on skin elasticity by assessing cellular stiffness and measuring collagen protein synthesis. Methods: Human dermal fibroblasts were treated with red ginseng, and the resulting changes in stiffness were investigated using atomic force microscopy. Cytoskeletal changes and mRNA expression of biomarkers of aging, including that of procollagens I and VII, elastin, and fibrillin-1, were investigated. Collagen in a human skin equivalent treated with red ginseng was visualized via hematoxylin and eosin staining, scanning electron microscopy, and atomic force microscopy. Results and conclusion: The stiffness of fibroblasts was significantly reduced by treatment with red ginseng concentrations of ≥ 0.8 mg/mL. The ratio of F-actin to G-actin decreased after treatment, which corresponded to a change in fibroblast stiffness. The storage modulus (G') and loss modulus (G'') of the skin equivalent were both lowered by red ginseng treatment. This result indicates that the viscoelasticity of the skin equivalent can be restored by red ginseng treatment.

• 대한기계학회논문집
• /
• 제16권11호
• /
• pp.2033-2048
• /
• 1992

본 연구에서는 탄성체 구조물로 형성된 응용에서 좀더 공통된 상황에 관한 것 이다.유일한 선형해석모델의 규명에 필요한 정보제공을 위하여 충분히 넓은 진동수 범위에 걸쳐 응답을 측정하고, 구조물을 기진시키는 것은 불가능하고 비경제적이며 또 는 일반적으로 바람직하지 못할 것으로 생각된다.