• Journal of Industrial Technology
• /
• v.24 no.B
• /
• pp.171-176
• /
• 2004

The effects of agitation and aeration for exopolysaccharide(EPS) production through batch cultivation of an Enterobacter sp. isolated from the composter were investigated. During the EPS fermentation under conditions of constant agitation speed from 200 to 900 rpm and constant aeration rate of 0.5-2.5 vvm, the low yields of EPS(4.8-5.2g/L) was observed as the viscosity increase of culture broth. With the stepwise increases in agitation speed and aeration rate, the EPS production and the viscosity of EPS were increased 1.3~1.4 times and 2.3~3.6 times higher than those of the fixed conditions, respectively. Therefore, these stepwise increases were considered as the key operating parameters for enhancing EPS production. The max. EPS(6.8g/L) and viscosity(14,000cp) were obtained when the agitation speed was increased from 300 to 900 rpm for 54hrs at 1.5 vvm.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2219-2225
• /
• 2007

The reaction mechanisms for the cyclizations of N-methyl-2-(2-chloropyridin-3-yloxy)acetamide to 1-methylpyrido[ 3,2-b][1,4]oxazin-2-one and 1-methyl-pyrido[2,3-b][1,4]oxazin-2-one were investigated using ab initio Hartree-Fock, second-order Moller-Plesset perturbation, single point coupled cluster with both single and double substitution, and density functional theory methods. The 5-membered spiro intermediate (2) is optimized from the cyclization of the acyclic reactants through the proton-transfer reaction, and this intermediate proceeds continuously to the 6-membered intermediate through either a stepwise or a concerted reaction. In the stepwise reaction, an N-bridge-type intermediate as a stable structure is optimized, whereas, in the concerted reaction, the O-bridge-type intermediate is not optimized.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.949-952
• /
• 2002

A regression model is used in predicting the response variable given predictor variables However, in case of large number of predictor variables, a regression model has some problems such as multicollinearity, interpretation of the functional relationship between the response and predictors and prediction accuracy. A clustering method and stepwise regression could be used to reduce the amount of data by grouping predictors having similar properties and by selecting the subset of predictors. respectively. This paper proposes a prediction method combining clustering method and stepwise regression. The proposed method fits a global model and local models and predicts responses given new observations by using both models. The paper also compares the performance of proposed method with stepwise regression via a real data of ample obtained in a steel process.

• Bulletin of the Korean Chemical Society
• /
• v.3 no.2
• /
• pp.37-44
• /
• 1982

In this work we have studied the multilayer stepwise adsorption of gases on solid adsorbents based on the previously developed theory. It is shown that stepwise adsorption isotherms emerge from our theory if an ad hoc adsorption regarding the degree of occupation for each successive layer is abolished and the effect of lateral intermolecular interactions among adsorbate molecules is included. In addition to these the effect of vertical interactions has also been taken into consideration. It seems that the vertical interaction plays a role in deciding the shape and the position of steps in resulting isotherms. It is evident from this research that it is the lateral interaction that is responsible for stepwise adsorption as long as the adsorbent surface is uniform and temperature is sufficiently low.

• Archives of Pharmacal Research
• /
• v.11 no.2
• /
• pp.99-113
• /
• 1988

Quantitation of ethenzamide, isopropylantipyrine and caffeine takes about 41 hrs by conventional GC method. Quantitation of allylisoprorylacetylurea takes about 40 hrs by conventional UV method. But quantitation of them takes about 6 hrs by DRIFT developing method. Each standard and sample sieved, powdered and acquired DRIFT spectrum. Out of them peak of each component was selected and ratio of each peak to standard peak was acquired, and then linear stepwise multiple regression was performed with these data and concentration. Reflectance value, Kubelka-Munk equation and Inverse-Kubelka-Munk equation were modified by us. Inverse-Kubelka-Munk equation completed the deficit of Kubelka-Munk equation. Correlation coefficients acquired by conventioanl GC and UV against DRIFT were more than 0.95.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.10
• /
• pp.1089-1092
• /
• 2001

• Journal of Korean Society of Transportation
• /
• v.34 no.6
• /
• pp.570-579
• /
• 2016

This study proposes a concept of Stepwise Transfer Coefficient(STC) which implies greater transfer cost with increasing the number of transfers. Thus, the public transport information system provides the choice sets of travel routes by the consideration of not only transportation time but also the optimum number of transfers. However, path choice problems that involve STC are found to include non additive cost, which requires additional route enumeration works. Discussions on route enumeration in actual transportation networks is very complicated, thereby warranting a theoretical examination of route search considering STC. From these points of view, this study results in a probability based transit trip assignment model including STC. This research also uses incoming link based entire route deletion method. The entire route deletion method proposed herein simplifies construction of an aggregation of possible routes by theoretically supporting the process of enumeration of the different routes from origin to destination. Conclusively, the STC reflected route based logit model is proposed as a public transportation transit trip assignment model.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.2
• /
• pp.247-258
• /
• 2008

In this study, static loading tests were performed on H-beam specimens to assess the static behavior of H-beam prestressed with multi-stepwise thermal prestressing method (TPSM). The amount of induced thermal prestress and connection type were differentiated among the 400-mm-high and 6,000-mm-long H-beam specimens to evaluate their effect on the behavior of the beams. From the experimental results, it between the H-beam and the cover-plate increased in yielding load by 13~18%, whereas stiffness increased by 27~34%. In case of specimens with both bolting and welding connection, yie lding load increased by 18~29% and stiffness increased by 43~51%. Multi-stepwise initial stress distribution was also observed from the prestressed specimens, verifying the effectiveness of the multi-stepwise TPSM. By application of the multi-stepwise TPSM, a significant increase in yielding load and stiffness can be achieved, hence increasing sectional and prestressing efficiencies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2B
• /
• pp.125-136
• /
• 2002

It is very important to acquire the synchronization in a intercell asynchronous WCDMA system, and it is carried out through the three-step cell search process. The cell search can operate in a stepwise parallel manner, where each step works in pipelined operation, to reduce the cell search time. In case that the execution time is set to be the same in each step, excessive accumulations will be caused in both step 1 and step 3, because step 2 should take at least one frame for its processing. In general, the effect of post-detection integration becomes saturated as the number of the accumulations increases. Therefore, the stepwise parallel scheme does not give much enhancement. In this paper, the performance of the stepwise parallel processing for cell search in WCDMA system is analyzed over Rayleigh fading channels. Through the analysis, the effect of cell search parameters such as the number of accumulations in each step and the power ratio allocated among channels is investigated. In addition, the performance of the stepwise parallel cell search is improved by adjusting the execution time appropriately for each step and is compared with that of the conventional stepwise serial processing.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1513-1514
• /
• 2013