• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.309-313
• /
• 2004

This paper presents an algorithm of detecting changed intervals with step-type shape in motor's speed response data. The proposed method is composed of 4 parts such as noise filtering, decision making of reference value's change, finding entrance point of steady state and detecting changed intervals. According to simulation results for three cases, we see that changed intervals can be found well.

• Smart Structures and Systems
• /
• 제30권2호
• /
• pp.173-181
• /
• 2022

The current paper presents a technique to detect crack in non-uniform cantilever-type pipe beams, that have step changes in the properties of their cross sections, restrained by a translational and rotational spring with a tip mass at the free end. An equation for estimating the natural frequencies for the non-uniform beams is derived using the boundary and continuity conditions, and an equivalent bending stiffness for cracked beam is applied to calculate the natural frequencies of the cracked beam. An experimental study for a step-changed non-uniform cantilever-type pipe beam restrained by bolts with a tip mass is carried out to verify the proposed method. The translational and rotational spring constants are updated using the neural network technique to the results of the experiment for intact case in order to establish a baseline model for the subsequent crack detection. Then, several numerical simulations for the specimen are carried out using the derived equation for estimating the natural frequencies of the cracked beam to construct a set of training patterns of a neural network. The crack locations and sizes are identified using the trained neural network for the 5 damage cases. It is found that the crack locations and sizes are reasonably well estimated from a practical point of view. And it is considered that the usefulness of the proposed method for structural health monitoring of the step-changed non-uniform cantilever-type pipe beam-like structures elastically restrained in the ground and have a tip mass at the free end could be verified.

• PNF and Movement
• /
• 제8권2호
• /
• pp.9-15
• /
• 2010

Purpose : This study aimed to investigate the effect of differing ground contact conditions on the eletromyographic(EMG) activity in rectus femoris, biceps femoris, tibialis anterior, gastrocnemius medialis during step-up activity in patients with hemiparesis. Methods : 10 hemiparetic patients performed step-up activity on three different ground contact conditions: entire ground contact, 2/3 ground contact, 1/3 groud contact. Result : The EMG activities of gastrocnemius medialis significantly changed on 1/3 ground contact(p<.05). However, no significant changed rectus femoris, biceps femoris, tibialis anterior between three differing ground contact conditions (p>.05). Conclusion : This study provides that EMG activities of gastrocnemius medialis significantly changed on different ground contacts. Therefore, this method can be used to strengthen the gastrocnemius medialis.

• 정보처리학회논문지B
• /
• 제14B권5호
• /
• pp.361-368
• /
• 2007

본 논문은 비디오 영상에서 블록기반 차영상을 이용한 연기검출 방법을 제시한다. 제안된 방법은 배경으로부터 변경된 영역 검출 단계, 배경영상 갱신단계, 검출된 영역이 연기인지를 판단하는 단계의 세 단계로 구성된다. 입력 비디오에서 각 프레임의 블록 평균영상을 계산하였으며, 변화영역을 검출하기 위하여 배경영상의 블록평균영상과 입력영상의 블록평균영상의 차이를 사용한다. 블록기반 차영상을 투영하여 변화된 사각영역을 검출한다. 차영상의 투영을 이용한 배경블록평균영상의 갱신방법을 제안한다. 변화영역의 중심위치 및 YUV 색상의 시간적 특징을 이용하여 연기영역을 판단한다.

• 전기학회논문지
• /
• 제63권12호
• /
• pp.1649-1654
• /
• 2014

This paper proposes the method which is improved a performance of PO MPPT control in PV system. The PO method is continually changed voltage toward direction that increases power, and if output power is decreased by changing voltage, a power of the conventional PO method is changed to a power before one step. These operations causes reduce of MPPT performance. Therefore, this paper proposes the MPPT method that can be improved the performance of the conventional PO method. When voltage is changed to direction of reducing power, the method proposed in this paper is changed to the voltage the opposite direction of twice step size. The MPPT performance of proposed method in this paper is compared with conventional PO method and proved the validity of this paper using these results.

• 조명전기설비학회논문지
• /
• 제29권12호
• /
• pp.40-46
• /
• 2015

This paper proposes the method which is improved a performance of PO MPPT control in PV system. The PO method is continually changed voltage toward direction that increases power, and if output power is decreased by changing voltage, a power of the conventional PO method is changed to a power before one step. These operations causes reduce of MPPT performance. Therefore, this paper proposes the MPPT method that can be improved the performance of the conventional PO method. When voltage is changed to direction of reducing power, the method proposed in this paper is changed to the voltage the opposite direction of twice step size. The MPPT performance of proposed method in this paper is compared with conventional PO method and proved the validity of this paper using these results.

• 정보처리학회논문지B
• /
• 제16B권4호
• /
• pp.271-280
• /
• 2009

본 논문에서는 옥외 비디오 영상에서 영역 확장법을 이용한 연기 영역검출 방법을 제시한다. 제안된 방법은 차영상에 의한 초기 변화영역 검출 단계, 경계선 검출 및 확장 단계, 특징 검출 및 연기분류의 3단계로 구성된다. 초기 변화영역 검출 단계에서는 배경영상으로 차영상을 계산하고, 초기 임계치를 이용하여 이진영상을 구하고, 잡음 제거를 위하여 모폴로지 연산을 수행한다. 경계선 검출 및 확장 단계는 레이블링 알고리즘에 의해 이진영상에서 변화영역을 검출하고, 각 변화영역의 경계선을 검출한 다음, 차영상과 경계선을 이용하여 확장된 경계선을 계산한다. 특징 검출 및 연기분류 단계에서는 확장된 경계선에 모멘트를 이용하여 타원을 추정하고 타원의 시간에 따른 특징정보를 이용하여 연기 영역을 분류한다.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.132-140
• /
• 2000

In conventional drilling, burr geometry can be changed according to the variation of drill geometry like point angle, rake angle. Step drilling is proposed to minimize the burr formation in drilling operation. The burr formed in first cutting can be removed in second cutting by the edge in step. The burr formed in second cutting by the edge in step can be minimized according to the change of geometry like, step angle and depth. The mechanism in step drilling is analyzed. Some step drills are applied to drilling the input shaft which is used for vehicle steering. To measure the burr formed in drilling, laser and height gage are used.

• 전기학회논문지
• /
• 제61권2호
• /
• pp.324-328
• /
• 2012

A recovered jitter of CDR(Clock and Data Recovery) Circuit based on Dual-loop DLL(Delay Locked Loop) for data recovery in high speed serial data communication is changed by depending on the input data and reference clock frequency. In this paper, 2-step DPC which has constant jitter performance for wide-range input frequency is proposed. The designed prototype 2-step CDR using proposed 2-step DPC has operation frequency between 200Mbps and 4Gbps. Average delay step of 2-step DPC is 10ps. Designed CDR circuit was tested with 0.18um CMOS process.

• 산업기술연구
• /
• 제19권
• /
• pp.59-65
• /
• 1999

This study is to analyze turbulent flow over a backward-facing step in a rectangular duct. The side wall effects on the internal flow were determined by varying the aspect ratio(defined as the step span-to-height ratio) from 1 to 20. In the flow behind a backward-facing step, separation, recirculation and redeveloping is occurred frequently. These phenomena appear in a particular variation by varying the aspect ratio. The results show that the aspect ratio has an influence on the velocity and reattachment length. When the AR is increased, the reattachment length is increased. For 6 over aspect ration, the rate of increase is decreased. The length of recirculation in the upper corner is increased, as the increase of aspect ration. It's width is not changed in the variation of aspect ration. The transverse, streamwise and spanwise velocities were decreased along the flow down stream of the step.