• Journal of Plant Biology
• /
• v.28 no.1
• /
• pp.9-20
• /
• 1985

Dimensional variation of secondary xylem elements, such as vessel element and fiber, was investigated in root, stem and branch of Alnus hirsuta and A. firma. It is clear that vessel diameter in the root is the widest, next in the stem, and the least in the branch. Length of vessel element among them becomes, however, larger in following sequence; stem, root, and branch, whereas fiber diameter and length are the widest in the root, the second in the stem, and the least in the branch. The size of secondary xylem element at any one level in tree increases from the center (pith) of the organs through a number of annual rings to the outer.

• Korean Journal of Medicinal Crop Science
• /
• v.25 no.6
• /
• pp.381-388
• /
• 2017

Background: This study was conducted to acquire basic information on the phenotypic and genotypic characteristics of the germplasm of Panax ginseng C. A. Meyer collected from China and Korea, and identify the variations that can be utilized in ginseng breeding programs. Methods and Results: Quantitative parameters were evaluated, and used to compare and analyze on genetic polymorphisms in the germplasm. The genetic characteristics and classifications were compared and analyzed for each character. Stem length followed a normal frequency distribution ranging from 15.5 cm to 40.5 cm, with showing approximately 40% having a stem length of 20 - 30 mm. Stem diameters ranged from 2.7 mm to 11.3 mm. Stem number per plant ranged from 1 to 3; approximately 50% had a single stem, and 45% had two stems. A non-normal frequency distribution was observed for petiole number, with approximately 60% of the germplasm having 3 - 5 petioles. Petiole length exhibited a normal frequency distribution, raging from 4.5 to 10.6. Petiole angle in the germplasm ranged from $28^{\circ}$ to $89^{\circ}$ and seedstalk length ranged from 5.6 cm to 27.3 cm. Conclusions: The genetic polymorphisms identified by complete linkage clustering based on the quantitative characteristics of Panax ginseng C. A. Meyer collected from Korea and China were classified to 6 groups, namely I, II, III, IV, V, and VI with frequencies of 6.7%, 20.0%, 31.7%, 8.3%, 6.7%, and 26.7%, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.5 no.1
• /
• pp.65-68
• /
• 1969

Studies wre made to investigate the relationships obetween measurable characters of leaf tobacco such as stem length, stem daimeter, number of leaves, leaf length, leaf thickness, leaf area of biggest leaf and the dry Iield. The results are summarized as follows; n the flue cured yellow tobacco; leaf width and leaf area of biggest leaf were significantly correlated to the yield. In the light air cure type of tobacco; stem diamer, leaf width and leaf area of biggest leaf were significantly correlated to the yield. In the dark air cured type of tobacco; stem diameter, number of leaves, leaf length, leaf width, and leaf area of biggest leaf were significantly correlated to the yield. It would be noticiable that the yield was significantly correlated to the leaf width which is easily measurable in the field, and negatively correlated to the leaf thickness though not significantly.

• Korean Journal of Agricultural Science
• /
• v.40 no.2
• /
• pp.87-91
• /
• 2013

The major characteristics of the developed corn hybrids were compared at each different planting time; 1st time(April 28) and 2nd time(August 20), respectively. Among traits surveyed, stem height showed highly at 1st time than 2nd, while ear height, stem diameter and ear length were similar at two times. Sugar content of the used hybrids showed highly at 2nd planting time than 1st. Pericarp thickness was also high at 2nd planting time. Especially, among hybrids CNU99 was the highest in stem height and ear length, CNU11 and CNU56 were high in sugar content, and CNU51 and CNU124 were thiner than other hybrids in pericarp thickness. Accordingly, these hybrids will be planted and recognized in 2nd yield trial for superior corn hybrid selection.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.6
• /
• pp.539-543
• /
• 2006

Lodging is classified as root lodging caused by the loss of supporting force in the root, bending caused by the deformation of the stem and breaking where the stem breaks down as loads exceeding critical elasticity were applied. This research excluded breaking which is not in a state of equilibrium and tried to partition the level of lodging using an algebraic model in root lodging and stem lodging, or bending. When a vertical load was applied, the deformation of the stem of rice plant showed the form of a quadratic equation. The trace of the panicle neck in the process of lodging was an ellipse-shape. When loading was pure root lodging, the trace of the panicle neck became a circle of which culm length is the radius. When it was a pure stem lodging, the trace of the panicle neck is an ellipse of which major axis is culm length and minor axis is 0.64* culm length. When both stem lodging and root lodging occurred in a natural setting, the partitioning of lodging can be calculated by a formula using eccentricity of an ellipse, S=e*100/0.768(S is the ratio of stem lodging in the whole lodging, e is eccentricity of the ellipse). This method is expected to be useful in simple lodging partitioning. We could also calculate the partitioning of stem lodging and root lodging as units of angles as an accuracy method, by using a straight line calculated by differentiating a quadratic equation of stem deformation at the origin of the coordinates. These two methods for dividing root and stem lodging showed different values. However, each of them showed almost same values with different lodging degree in one plant.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2001.11b
• /
• pp.49-61
• /
• 2001

This study was carried out to determine the effect of various fertilizer levels, sowing time and planting density on the growth and yield of Scuteliaria baicalensis GEORGE cultivated after the barley in the southern coastal areas of Korea under the non- mulching condition by direct sowing culture. The flowering date of medium dressing plot(N : P$_2$O$\sub$5/ : K$_2$O=9 : 13.5 : 9kg/10a) and heavy dression plot(N : P$_2$O$\sub$5/, : K$_2$O=12 :18 : 12kg/10a) were July 23. The flowering date of the medium and the heavy dressing plot was delayed by 3days compared with that of non-fertilizing plot. The growth characteristics such as stem length, diameter of main stem, number of branch per plant, main root length, main root length, main root thickness and dry weight of stem leaves were more increased at medium dressing plot than that of other fertilizer levels, The root dry weight of in Scutellaria baicalensis GEORGE cultivated after barley was hlghest at the fertilizing plot of N : P$_2$O$\sub$5/ : K$_2$O=9 : 13.5 : 9kg/10a. The dried-root yield was 178kg in medium dressing plot, 167kg in standard dressing pot, and 126kg in non-dressing plot, The dried-root yield of medium dressing plot was 7% and 41 cie higher than that of standard dressing pot and non-dressing control plot, respectively. Emergence and flowering dates in the sowing time of June 1 were earlier than those of the other sowing times. In the sowing time of June 1, length and diameter of main stem, number of node per main stem, number of branch per plant and dry weight of stem leaves were greater than those of sowing times of June 10 and June 20. Yield components such as main stem length and diameter, main stem numbers, branches per plant, dry weight of stem leaves, main root length and thickness, number of large root and fine root per plant, and dry weight of root were the highest at the sewing time of June 1 as the yield of 71.3kg/10a. Optimum sowing time of Scuteilaria baicaiensis GEORGE cultivated after barley was June 1 in southern areas of Korea. Stem length was long in dense planting of 20${\times}$10cm and short in spacious planting of 30${\times}$10cm and 40${\times}$10cm by direct sowing cultivated after barley. Stem diameter was thick in spacious planting of 30${\times}$10cm and 40${\times}$10cm and was thin in dense planting of 20${\times}$10cm by direct sowing cultivated after barley. Length and dry weight of root per plant were decreased in dense planting of 20${\times}$10cm and were increased in spacious planting of 30${\times}$10cm and 40${\times}$10cm by direct sowing cultivated after barley. Yield of dry root was highest in optimum planting density(30${\times}$10cm 33 plants/㎡) by direct sowing cultivated after barley. The correlation coefficient between number of planting plant and stem length showed highly positive correlation. These characters of stem diameter, number of branches, main root length and yield of dry root mentioned above showed negative correlations with planting plants.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.3
• /
• pp.285-290
• /
• 1984

The effects of retardants B995 and CCC on the growth and yield of soybean cultivar, kwanggyo, were investigated. The 3 application times(4th, 5th and 6th trifoliate leaf stage) combined with 4 concentrations (500, 1000, 2000 and 3000 ppm) were treated, and the retardant solutions were sprayed on the foliage. Only stem length in retardants, rate of podding in application times, and, in concentrations, stem length, number of branch, number of pod per plant and grain yield, were significant. In the inhibition of stem elongation, B995 was more effective than CCC, and rate of podding was the highest in the 4th leaf-spraying. The highest concentration, 3000 ppm, was the most effective in the inhibition of stem elongation and in the increase of number of branch and pod, rate of podding, and in yield. The number of node of mainstem, dry stem weight, chlorophyll and 100 grain weight were not significant with any treat. Yield had positively correlated with number of branch and pod, and rate of podding but negatively with stem length. The retardants was thought to be considerably conducive to the increase of yield.

• Korean Journal of Weed Science
• /
• v.17 no.3
• /
• pp.303-309
• /
• 1997

Variation of morphological and physiological traits of 50 Bidens tripartita accessions were studied and the accessions were grouped through cluster analysis based on four major characters; plant type, leaf partition, achene length, days to flowering. Bidens tripartite accessions have shown significant variations in plant type, stem length, days to flowering, leaf shape, leaf partition, chlorophyll content, leaf color, stem color, achene color, achene length and achene shape. Most of Bidens tripartite accessions appeared to have strong dormancy and also photodormancy with some exceptions. Plants could be classified into 5 types from straight(I) to triangle(V), and intermediate diamond type(III) was prevalent. The plant type score has negative correlation with the stem length. None, three, and five part leaved plants were observed and most of them were three or five parted. Leaf partition had negative correlation with achene length and chlorophyll content. Average days to flowering was 108 days in the range of 94~141 days. It had positive correlation with achene length and leaf shape and negative correlation with achene color. Average achene length was 10.0mm and it had positive correlation with achene shape, stem length, days to flowering and leaf shape. It also had negative correlation with leaf color, stem color, achene color, leaf partition. Bidens tripartite accessions could be divided into identifiable six groups from the cluster analysis at the distance 0.06 using Ward's minimum-variance method.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.2
• /
• pp.154-161
• /
• 1994

This experiment was carried out to establish micropropagation system in Fritillaria thunbergii Miq. Through the culture of bulblet scales, stems, node-buds and shoot tips with special reference to the effect of physiological age of explant and plant growth regulators on bulblet formation. Number of formed bulblets was significantly increased in node-bud or stem tissue compared to scals segments and on the medium supplemented with kinetin than BA containing medium. Optimum levels of kinetin for bulblet formation from node-bud taken from above 3 cm shoot length and stem segments excised from below 3 cm shoot length were 5.0 mg /L and $1.0{\sim}3.0\;mg$ /L kinetin, respectively. Interesting phenomenon was observed, the direct formation of bulblets from the axilliary bud of cultured explants. Bulblet forming capacity in stem tissue was depended on stem age, young stem had high regeneration ability compared to old stem taken from above 10 cm shoot length. 1.0 mg /L kinetin was optimum concentration for the formation of bulblets from old stem segments. Stem tissue taken from underground growing plant was promoted coampare to shoot tips or bulb scale segments. Optimum concentration of sucrose was $5{\sim}7%$. Summariged above results revealed that effective explant for micropropagation was stem and /or node-bud tissue excised from less than 3 cm plant height compared to those of bulb scale segments which showed high contamination after culture. Maximum multiplication rate of young stem and /or node-bud segment was about 20 times. Kinetin requirement for stimulation of bulblet formation from cultured explant depended on source of explants but favorable levels of kinetin for organogenesis ranged from 1.0 mg /L to 5.0 mg /L.

• Korean Journal of Medicinal Crop Science
• /
• v.3 no.2
• /
• pp.135-139
• /
• 1995

In order to determine the optimum planting density of Perilla frutescens which is suitable for the southern part of Korea, agronomic characters, yield of fresh stem, leaf and seed, and yield components were investigated grown in 1985 and 1986 at Mokpo Branch Station of Crop Experiment Station. The heading date was Aug. $14{\sim}15$ and the blooming period was Aug. $19{\sim}21$ regardless of the difference of plant density, but the longest stem length was 135cm in the plant density of $70{\time}40cm$ and the stem length in the plant density of $80{\time}40cm$ was 134cm. The quantity of fresh weight of stem and leaf and fresh weight of seed was high as 531kg/l0a in the plant density of $80{\time}40cm$. The positive correlation such as $0.7315^*,\;0.9024^{**}\;and\;0.7425^*$ were found between stem length and fresh weight of stem and leaf, stem length and fresh weight of seed, fresh weight of stem and leaf and fresh weight of seed and so high significance was recongnized. In the verification of significance of row spacing, the disperse of the stem length was $55.67^{**}$, that of fresh weight of stem and leaf is $268.50^*$, theat of fresh weight of seed was $16.00^{**}$ and high significance was recognized. In the verification of significance of intrarow spacing, the diperse of stem length was $54.21^{**}$, that of fresh weight of stem and leaf was $2,582.00^{**}$, that of fresh weight of seed was $48.00^{**}$ and then high significance was recognized. Accordingly, the proper plant density of perilla frutescens was 80cm of row $spacing{\time}40cm$ of intrarow spacing.