• 한국정보전자통신기술학회논문지
• /
• 제15권5호
• /
• pp.349-359
• /
• 2022

본 연구는 자동 조향 트랙터용 비례제어밸브의 국산화를 위한 기초연구로써 다양한 트랙터 조향 조건에 따른 조향 비례제어밸브 동특성 계측 및 분석을 위해 수행되었다. 동특성 데이터는 유량 및 압력 계측 시스템을 통해 수집되었으며, 수집된 유량 및 압력 데이터를 이용하여 동력을 분석하였다. 실험 조건은 트랙터 엔진 회전속도와 조향각을 주요 변수로 선정하였으며, 실험은 우레탄 노면 조건에서 수행되었다. 그 결과, 트랙터 엔진 회전속도 및 조향각이 증가함에 따라 비례제어밸브 유량, 압력, 동력이 모두 증가하는 것으로 나타났다. 특히, 동일한 엔진회전속도에서 조향각이 증가함에 따라, 유량, 압력, 동력은 각각 최대 190%, 172%, 273% 증가하는 경향을 보였으며, 동일한 조향각에서 엔진회전속도가 증가함에 따라, 유량, 압력, 동력은 각각 최대 161%, 122%, 168% 증가하는 경향을 보였다. 이를 통해, 조향각이 엔진 회전속도보다 비례제어밸브의 동특성에 더 높은 영향을 미치는 것을 확인하였다.

• 한국음향학회지
• /
• 제23권3호
• /
• pp.206-213
• /
• 2004

본 논문에서는 수중에서 빠른 속도로 기동하는 표적 환경에 적합한 조향각 오차 보정기법을 제안한다. 기존의 협대역 조향각 오차 보정기법에서는 다수의 시간 데이터 단편을 이용한 반면, 제안한 기법은 하나의 시간 데이터 단편에서 다수의 주파수 성분들로부터 모드 공분산행렬을 구성하고, 이를 이용하여 얻어진 광대역 MVDR (Minimum Variance Distortionless Response) 빔출력을 최대화시키는 조향각 오차를 추정함으로써 짧은 관측시간 내에 정확한 표적의 방위각을 추정할 수 있다. 모의신호와 실제 해상 실험 데이터를 이용하여 제안한 기법의 성능을 기존의 기법과 비교, 분석하였다.

• 제어로봇시스템학회논문지
• /
• 제17권4호
• /
• pp.313-320
• /
• 2011

Multi-axle driving vehicles that are used in special environments require high driving performance, steering performance, and stability. Among these vehicles, 6WS/6WD vehicles with middle wheels have structural safety by distributing the load and reducing the pitch angle during rapid acceleration and braking. 6WS/6WD vehicles are favored for military use in off road operations because of their high maneuverability and mobility on extreme terrains and obstacles. 6WD vehicles that using in-wheel motor can generate the independent wheel torque without other mechanical parts. Conventional vehicles, however, cannot generate an opposite driving force at each side wheel. Using an independent steering and driving system, six-wheel vehicles can show better performance than conventional vehicles. Using of independent steering and driving system, the 6 wheel vehicle can improve a performance better than conventional vehicle. This vehicle enhances the maneuverability under low speed and the stability at high speed. This paper describes an independent 6WS/6WD vehicle, consists of three parts; Vehicle Model, Control Algorithm for 6WS/6WD and Simulation. First, vehicle model is application of TruckSim software for 6WS and 6WD. Second, control algorithm describes the optimum tire force distribution method in view of energy saving. Last is simulation and verification.

• 한국자동차공학회논문집
• /
• 제25권2호
• /
• pp.167-178
• /
• 2017

The steering wheel of a vehicle has a typical characteristic of automatically returning to its neutral state when the driver releases it. Steering returnability originated from the tire forces and kingpin moments. It is proportional to the reaction torque that is generated through the rack and column, which are dependent on suspension and steering geometry. It is also important to accurately predict and design it because steering returnability is related to steering performance. In this study, a detailed multibody dynamics model of a vehicle was designed by using ADAMS/Car and simulated for steering returnability. In addition, a tolerance analysis of the chassis system in terms of part dimension and properties has been performed in order to minimize the design parameters. The sensitivity of the selected design parameters was then analyzed via Design of Experiments(DOE). As a result, we were able to obtain the main parameters through a contribution analysis. It can be used to predict steering returnability and improve its performance, which is represented by the angle of restoration and laterality.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.444-451
• /
• 2005

The analysis of human arm motion during steering maneuver is carried out for investigation of man-machine interface of driver and steering system Each arm is modeled as interconnection of upper arm, lower arm, and hand by rotational joints that can properly represents permissible joint motion, and both arms are connected to a steering wheel through spring and damper at the contact points. The joint motion law during steering motion is determined through the measurement of each arm movement, and subsequent inverse kinematic analysis. Combining the joint motion law and inverse dynamic analysis, joint stiffness of arm is estimated. Arm dynamic analysis model for steering maneuver is setup, and is validated through the comparison with experimentally measured data, which shows relatively good agreement. To demonstrate the usefulness of the arm model, it is applied to study the effect of steering column angle on the steering motion.

• 제어로봇시스템학회논문지
• /
• 제18권11호
• /
• pp.1065-1071
• /
• 2012

In this paper, we proposed a method for vehicle monitoring with trajectory reconstruction. For safety, it is important to monitor the driving habit of driver. Every year, many accidents occur due to the reckless driving of the driver. Continuous monitoring of the status of commercial vehicles is needed for safety through the entire path from start point to the destination. To monitor the reckless driving, we try to monitor the trajectory of the vehicle by using vehicle's lateral acceleration data. Compared with steering angle and lateral acceleration, these resemble each other. So, we find the relationship of steering angle and acceleration, and find the global direction of vehicle. We find the position of non-GPS section with EKF (External Kalman Filter) and reconstruct the whole trajectory during vehicle driving.

• Journal of Magnetics
• /
• 제17권4호
• /
• pp.285-290
• /
• 2012

Electric Power Steering (EPS) system is superior to conventional Hydraulic Power Steering (HPS) system in aspect of fuel economy and environmental concerns. The EPS system consists of torque sensor, electric motor, ECU (Electric Control Unit), gears and etc. Among the elements, the torque sensor is one of the core technologies of which output signal is used for main input of EPS controller. Usually, the torque sensor has used torsion bar to transform torsion angle into torque and needs linear characteristic in terms of flux variation with respect to rotation angle of permanent magnet. The torsion angle of both ends of a torsion bar is measured by a contact variable resistor. In this paper, the sensor is accurately analyzed using 3D finite element method and its characteristics with respect to four different shapes of the stator teeth are compared. The four shapes are rectangular, triangular, trapezoidal and circular type.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.149-149
• /
• 2000

We experimented on AGV driving test with color CCD camera which is setup on it. This paper can be divided into two parts. One is image processing part to measure the condition of the guideline and AGV. The other is part that obtains the reference steering angle through using the image processing parts. First, 2 dimension image information derived from vision sensor is interpreted to the 3 dimension information by the angle and position of the CCD camera. Through these processes, AGV knows the driving conditions of AGV. After then using of those information, AGV calculates the reference steering angle changed by the speed of AGV. In the case of low speed, it focuses on the left/right error values of the guide line. As increasing of the speed of AGV, it focuses on the slop of guide line. Lastly, we are to model the above descriptions as the type of PID controller and regulate the coefficient value of it the speed of AGV.

• 자동차안전학회지
• /
• 제14권4호
• /
• pp.16-20
• /
• 2022

Accurate state estimation is important for autonomous driving. However, the estimation error increases in situations that a lot of longitudinal slip occurs. Therefore, this paper presents a vehicle state estimation method using an Extended Kalman Filter. The filter estimates the states of the host vehicle robust to wheel slip. It utilizes the measurements of the four-wheel rotational speeds, longitudinal acceleration, yaw-rate, and steering wheel angle. Nonlinear measurement model is represented by Ackermann Model. The main advantage of this approach is the accurate estimation of yaw rate due to the measurement of the steering wheel angle. The proposed algorithm is verified in scenarios of autonomous emergency braking (AEB), lane change (LC), lane keeping (LK) using an automated vehicle. The results show that the proposed algorithm guarantees accurate estimation in such scenarios.

• Journal of electromagnetic engineering and science
• /
• 제18권4호
• /
• pp.267-269
• /
• 2018

In this letter, the null steering of a circular array is presented using a modified array factor (AF) for a global positioning system (GPS) anti-jam. The seven radiating elements were designed using a mu-zero resonance (MZR) circularly polarized (CP) antenna arranged toward the center. Since the radiating elements, which are arranged toward the center, have a CP characteristic, the AF of the seven radiating elements has to be modified considering the rotation angle of the nth radiating element. The phases of input ports can be calculated to implement a nulling of radiation patterns where the modified AF is zero. To verify the modified AF for null steering in the desired direction, two cases of power dividers operating in $L_2$ band (1.2276 GHz) were fabricated to achieve pattern nulling at a certain angle. The modified AF can be confirmed by a comparing the simulated and measured radiation patterns.