• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.240.2-240.2
• /
• 2014

Characteristics of pulse-discharged plasma in liquid and its biological applications to proteins are investigated by making use of high voltage Marx generator. The Marx generator has been consisted of 5 stages, where each charging capacitor is $0.5{\mu}F$ to generate a high voltage pulse with rising time of $1{\mu}s$. We have applied an input voltage of 6 kV to the each capacitor of $0.5{\mu}F$. The high voltage pulsed plasma has been generated inside a polycarbonate tube by a single-shot operation, where the breakdown voltage is measured to be 7 kV, current of 1.2 kA, and pulse width of ${\sim}1{\mu}s$ between the two electrodes of anode-cathode made of stainless steel, which are immersed into the liquids. For the investigation of the influence of pulsed plasma on biomolcules, we have focused on the amino acids, DNA, proteins, cell and cholesterol.

• 열처리공학회지
• /
• 제19권5호
• /
• pp.257-261
• /
• 2006

Scandium(Sc) in Al-Zn-Mg-Cu based Al alloy on precipitation phenomenon was compared to a 7001(Al-7.2%Zn-3.2%Mg-1.8%Cu) Al alloy. GP zone and ${\eta}^{\prime}$ phases were the main strengthening phases at low aging temperature under $100^{\circ}C$, but ${\eta}^{\prime}$ and $Al_3Sc$ phases were the main strengthening phases at high aging temperature above $1600^{\circ}C$ in Sc added 7000(Al-7.7%Zn-2.0%Mg-1.9%Cu-0.1%Zr) Al alloy. With the addition of 0.1%Sc in 7000 Al alloy, the activation energy for the GP zone, ${\eta}^{\prime}$ and ${\eta}$ phase decreased compared to the 7001 Al alloy. This result indicates that the Sc accelerated the precipitation for the GP zone, ${\eta}^{\prime}$ and ${\eta}$ phases in 7000 Al alloy. Al-7.7%Zn-2.0%Mg-1.9%Cu-0.1%Zr-0.1 Sc alloy has higher strength than 7001 Al alloy, which has high strength.

• 한국공간구조학회논문집
• /
• 제12권4호
• /
• pp.81-90
• /
• 2012

The concrete-filled tube (CFT) column has the excellent structural performance. But it is difficult to connect with column and beam because of closed section. Its Solution, 2 members of ㄷchennel in which Internal diaphragm is installed were welded beforehand and the method of making Rectangular Steel Tube was proposed. According to upside and downside junction shape, Internal diaphragm suggested as symmetric specimen and asymmetric specimen. The upper and lower diaphragm of the Symmetric specimen used the same horizontal and The upper diaphragm of the Asymmetric specimen used the horizontal plate and the lower diaphragm used the vertically plate. In this research, 4 T-shape column to beam steps connections were tested with cyclic loading experiment in order to evaluate the structural capability of the offered connection. Symmetric specimens be a failure in 0.03rad from beam flange. And Asymmetric specimens be a failure in 0.05rad from column interface. The comparison results of All specimens shown similar to energy absorption capacity in 0.02rad.

• 제어로봇시스템학회논문지
• /
• 제14권2호
• /
• pp.184-190
• /
• 2008

This paper describes a message model based on XML (eXtensible Markup Language) to present real-time data from sensors and instruments at manufacturing processes for web service. HTML (Hyper Text Markup Language) is inadequate for describing real-time data from process control plants while it is suitable for displaying non-real-time multimedia data on web. For XML-based web service of process data, XML format for the data presentation was proposed after investigating data of various instruments at steel-making plants. Considering transmission delay inevitably caused from increased message length and processing delay from transformation of raw data into defined format, which was critical for operation of a real-time system, its performance was evaluated by simulation. In the simulation, we assumed two implementation models for conducting the transformation function. In one model, transformation was done at an SCC (Supervisory Control Computer) after receiving real-time data from instruments. In the other model, transformation had been carried out at instruments before the data were transmitted to the SCC. Various tests had been conducted under different conditions of offered loads and data lengths and their results were described.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1079-1083
• /
• 2009

In this study, the pullout resistance characteristic of a wedge-shaped soil nail, made by attaching small steel sticks to the tip of a nail in a wedge shape, was investigated. It was developed to improve the overall pullout resistance capacity of the existing soil nail system, composed of nail and grout, by making the wedge provide additional pullout resistance. In order to evaluate the pullout resistance of the wedge shape-soil nail, field pullout tests were conducted, and the results were compared with those for the existing soil nail without the wedge. The field test results showed that the pullout resistance capacity of the wedge-shaped soil nail was 50% larger than that of the existing soil nail without the wedge.

• 자원리싸이클링
• /
• 제12권1호
• /
• pp.41-47
• /
• 2003

대기에 방치된 생석회의 상온에서 내수화성을 향상시키기 위해 생석회의 탄산화반응과 수화반응실험을 수행하였다. 제강공정에서 사용시까지 수화반응을 억제시키기 위해서는 생석회 표면을 약 6%정도 탄산화시킬 필요가 있었다. 생석회의 탄산화를 위한 회전로 배가스 재순환이 평형연소온도 및 NOx농도에 미치는 영향을 열역학적으로 계산한 결과, 배가스 부피 백분율이 증가함에 따라 연소온도와 NOx농도는 감소하였다.

• 자원리싸이클링
• /
• 제18권3호
• /
• pp.3-10
• /
• 2009

무기성 산업폐기물을 이용한 $CO_2$ 고형화 연구는 폐콘크리트 시멘트 미분말 등 무기성 산업폐부산물의 성분 중의 CaO 또는 MgO 성분과 지구온난화의 주범인 $CO_2$와 반응시켜 탄소를 안정적으로 고형화시켜 대기 중의 $CO_2$의 발생을 저감시키는 연구이다. 본 고에서는 산업 현장 및 도시에서 발생되는 $CO_2$의 대기 방출을 저감시킴과 동시에 산업폐부산물의 유효 자원화를 위한 $CO_2$ 고형화 연구의 국내외 기술 동향을 파악하고, 이를 통해 한국형 $CO_2$ 저감 및 활용 기술을 제시하고자 한다.

• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.8-14
• /
• 2014

Pulverized coal (PC) has become an important auxiliary fuel in the iron and steel industry since the technique of pulverized coal injection (PCI) was developed for iron making. The combustion efficiencies of pulverized coal in blowpipes and tuyeres under various operational conditions are numerically predicted to determine the performance levels with regard to different locations of the nozzles in a blast furnace. A variety of parameters, including the pulverized coal quantities, oxygen amounts, inlet temperatures of the tuyeres, and the mass flow rate of coal carrier gas are taken into consideration. Also, in order to develop greater efficiency than those of existing coal injection systems, this study applies a flame measurement system using a charge-coupled device (CCD) camera and a frame grabber. It uses auto sampling algorithms from the flame shape information to determine the device for the optimal location control for PCI. This study finds further improvements of the blast furnace performance via the control of the PCI locations.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.3163-3168
• /
• 2008

Pulverized coal (PC) has become an important auxiliary fuel in the iron and steel industry since the technique of pulverized coal injection (PCI) system was developed for iron making. Combustion efficiencies of pulverized coal in blowpipes and tuyeres under various operational are numerically predicted to recognize the performance with the locations of nozzles in a blast furnace. A variety of parameters including the pulverized coal quantities, oxygen amounts, inlet temperature of the tuyeres and mass flow rate of coal carrier gas are taken into consideration. Also In order to develop more efficient than existing coal injection system, this study applies a flame measurement system using a charge couple device (CCD) camera and frame grabber. And it has used algorithms of auto sampling from flame shape information and composed the device for location control of PCI. This study find to further improve the blast furnace performance by the control of PCI locations.

• 한국자기학회지
• /
• 제11권3호
• /
• pp.114-121
• /
• 2001

순털 코아의 소결밀도와 자기특성에 미치는 분진의 첨가량과 소결온도의 영향을 조사하였다. 1350 $^{\circ}C$에서 1시간동안 소결한 경우 최고의 자기특성을 나타내었으며, 분진의 첨가량이 증가할수록 자기특성은 열악해지나 10 wt.%까지는 양호하였다. 한 예로 10 Wt.%의 분진 첨가로 얻어진 직류자기특성은, 자속밀도(B$_{15}$), 보자력(H$_{c}$)과 최대투자율($\mu$$_{max}$)이 각각 9.8~10.9 kG, 2.2~2.3 Oe, 1950~2050로 나타났다. 이 값은 Hoganas사에서 제조된 순철 분말(Ancorsteel)의 자기특성과 동등한 수준이며, 본 연구에서 얻어진 우수한 특성의 소결코아는 자동차, DC 모터의 고정자 등에 활용이 기대된다.