• 한국구조물진단유지관리공학회 논문집
• /
• 제23권3호
• /
• pp.17-24
• /
• 2019

탄소섬유보강폴리머(CFRP)는 경량이며, 성형성 및 작업성이 뛰어나 보수보강재료로서 널리 사용되고 있다. 하지만, 연성재료인 철근과는 달리 CFRP는 취성재료이므로, 철근에서 사용되는 전통적인 설계접근 방법을 적용하는 것은 부적합하다. 연성재료인 철근은 항복이후 요소사이의 응력재분배가 이뤄져 복합요소의 거동은 평균화된다. 따라서 복합요소의 응력 평균은 단위요소의 평균과 같고, 표준편차는 더 작아진다. 따라서 연성재료의 설계값은 증가시킬 수 있으나, 안전측, 실무적 접근에서 고정값을 사용한다. 반면 취성재료의 경우, 응력재분배를 기대하기 어려워 복합요소의 거동은 더 약한 요소에 의해 결정된다. 이에 복합요소의 응력의 평균값과 표준편차는 감소한다. 따라서 취성재료의 설계값은 요소수가 증가할수록 감소한다. 이 논문에서는 취성재료에서 정규분포를 가지는 단위요소가 요소 결합에 따라 와이블 분포를 가지게 됨을 증명하고, 이를 반영하여 하중이 작용하는 면적에 따른 물성치의 보정식을 제안하였다.

• Steel and Composite Structures
• /
• 제29권2호
• /
• pp.187-200
• /
• 2018

This paper handles the repairing of deficient square Concrete-Filled Steel-Tube (CFST) beams subject to bending through an experimental and numerical program. Eight square-CFST beams were tested. A 5-mm artificial notch was induced at mid-span of seven beams, four of them were repaired by using CFRP sheets and two were repaired by using GFRP sheets. The beam deflection, strain and ultimate moments were recorded. It was found that providing different cut-off points for the different layers of FRP sheets prohibited failure at termination points due to stress concentrations. Using different lengths of FRP sheets around the notch retarded crack propagation and prevented FRP rupture at the crack position. Finite element analysis was then conducted and the proposed FE model was verified against the recorded experimental data. The influence of various parameters as FRP sheet length, tensile modulus and the number of layers were studied. The moment capacity of damaged square-CFST beams was improved up to 77.6% when repaired by using four layers of CFRP, however, this caused a dramatic decrease in beam deflection. U-wrapping of notched-CFST beam with 0.75 of its length provided a comparable behaviour as wrapping the full length of the beam.

• 한국항공우주학회지
• /
• 제44권6호
• /
• pp.484-491
• /
• 2016

본 연구의 목적은 항공기 메커니즘 구조물에 사용되는 금속 소재 토크바를 복합소재를 이용하여 무게절감이 가능한 구조물을 개발 하는것에 있다. 토크바에 주어진 하중조건 및 구조물의 설계 경계조건에 부합하는 유한요소모델을 이용하여 구조해석을 수행 하였다. 이를 바탕으로 최적화된 복합소재의 적층 조건 및 토크바의 두께 요건을 설정하였다. 설계요건에 맞게 제작된 시제품을 이용하여 복합소재 토크바의 비틀림 시험을 실시하였으며, 동구조 시험을 통해서 토크바의 강도 및 강성 요구조건을 만족한다는 것을 증명하였다.

• 한국농공학회논문집
• /
• 제48권1호
• /
• pp.61-68
• /
• 2006

The p-version nonlinear finite element model has been developed to analyze the nonlinear behavior of simply supported RC slabs strengthened with carbon fiber reinforced plastic sheets. The shape function is adopted with integral of Legendre polynomials. The compression model of concrete is based on the Kupfer's yield criterion, hardening rule, and crushing condition. The cracking behavior is modeled by a smeared crack model. In this study, the fixed crack approach is adopted as being geometrically fixed in direction once generated. Each steel layer has a uniaxial behavior resisting only the axial force in the bar direction. Identical behavior is assumed fur tension and compression of steel according to the elastic modulus. The carbon fiber reinforced plastic sheets are considered as reinforced layers of equivalent thickness with uniaxial strength and rigidity properties in the present model. It is shown that the proposed model is able to adequately predicte the displacement and ultimate load of nonlinear simply supported RC slabs by a patch with respect to reinforcement ratio, thickness and angles of CFRP sheets.

• Structural Engineering and Mechanics
• /
• 제74권2호
• /
• pp.243-254
• /
• 2020

Devastating RC structural failures in the past have identified that the behavior of beam-column joints is more critical and significantly governs the global structural response under seismic loading. The congestion of reinforcement at the beam-column joints with other constructional difficulties has escalated the attention required for strengthening RC beam-column joints. In this context, numerous studies have been carried out in the past, which mainly focused on jacketing the joints with different materials. However, there is no comparative study of different approaches used to strengthen RC beam-column joints, from efficiency and cost perspective. This paper presents a detailed investigation carried out to study the various strengthening schemes of exterior RC beam-column joints, viz., steel fiber reinforcement, carbon fiber reinforced polymer (CFRP) strengthening, steel haunch strengthening, and confining joint reinforcement. The effectiveness of each scheme was evaluated experimentally. These specimens were tested under horizontal loading that produced opening moments on the joints and their behavior was studied with emphasis on strength, displacement ductility, stiffness, and failure mechanism. Special attention was given to the study of crack-width.

• 한국전산구조공학회논문집
• /
• 제20권5호
• /
• pp.543-550
• /
• 2007

건설 분야에서는 신소재인 FRP(fiber reinforced polymer) 복합재료는 그 경량성과 고강도로 점차 그 사용영역이 넓어지고 있다. 본 연구에서는 이러한 FRP 소재의 성능을 평가하기 위하여 제2 진도대교를 원형(prototype)으로 하는 3차원 선형 모델링을 하였고 케이블 및 거더에 복합소재를 적용하여 해석하였다. 해석 결과는 Steel 케이블 및 보강형을 사용한 경우와 비교를 통하여 분석하였고 정적해석 및 모드해석을 수행하였다. 정적해석에서는 각 부재의 최대 응력 및 중앙 지점의 최대 처짐을 비교하였다. 사하중 감소 때문에 복합소재를 사용한 경우 상판의 처짐이 감소하는 것을 확인하였으며, 케이블의 단면을 감소시켜 해석함으로써 그 결과를 다시 보였다. 단면 감소, 모드해석에서는 진동수 비를 통해 Flutter의 발생 풍속을 비교하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권4호
• /
• pp.155-164
• /
• 2011

충격 하중 재하 실험의 경우 빠른 하중 재하 속도로 인해 실험 데이터를 측정하는 방법에 있어 많은 어려움이 있다. 또한 부재의 국부적 손상을 측정하지 못함으로써 부재의 동적 거동을 왜곡하는 문제점이 존재한다. 따라서, 본 연구에서는 충격 실험에서의 한계를 극복하기 위하여 명시적(explicit) 유한요소 해석 프로그램인 LS-DYNA를 이용하여 FRP Sheet 및 강섬유로 보강된 콘크리트의 저속 충격 하중 하에서의 동적 거동을 분석하였다. 해석 모델은 1방향 및 2방향 부재이며 충격 하중 재하 시부재의 국부적 파괴를 고려하고 있다. 해석결과 강섬유에 의해 보강된 SFRC와 UHPC 부재의 경우 충격 저항성능이 크게 향상되었다. FRP Sheet로 보강한 경우 GFRP가 CFRP보다 우수한 충격 저항 성능을 보였으며 FRP Sheet의 방향성에 의한 영향은 크게 나타나지 않았다. 본 연구에서 수행된 해석은 충격 실험 결과와의 비교를 통해 그 신뢰성이 검증되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.655-662
• /
• 2019

This study evaluated the multi-bonding performances of timbers as well as those of reinforcement and timber to obtain data for preparing guidelines regarding the use of timbers as large structural members. For the multi-bonding performances of timbers, four types of bonding surfaces were prepared according to the pith position. For the bonding performances of FRP (fiber-reinforced plastic)/steel plate and timber, a total of 11 types of specimens were produced for the selection of the appropriate adhesive. The bonding performances of the produced specimens were evaluated through a water soaking delamination test, a water boiling delamination test, and a block shear strength test. The test results showed that the bonding strength of the bonding surface according to the pith position was highest in the specimen for which the two sections with the pith at the center of the cross-section on timber and between the bonding surfaces (the tangential and radial sections were mixed) were bonded. Furthermore, the specimens for which the section (radial section) with the pith on the bonding surface of the timber was bonded showed a high delamination percentage. The results of the block shear strength test showed that the bonding section did not have a significant effect on the shear strength, and that the measured wood failure percentage was higher than the KS standard value. The PVAc adhesive showed the highest bonding strength between larix timber and GFRP (glass FRP). Furthermore, the epoxy and polyurethane adhesives showed good bonding strength for CFRP (carbon FRP) and structure steel, respectively.

• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.835-842
• /
• 2002

In this paper, static and fatigue bending strengths and failure mechanisms of CFRP (carbon fiber reinforced plastics) laminates having impact damages have been evaluated. Composite laminates used for this experiment are CF/EPOXY orthotropy laminated plates, which have two-interfaces $[0^0_ 4/90^0_4]_{ sym}$. A steel ball launched by the air gun collides against CFRP laminates to generate impact damages. The damage growth during bending fatigue test is observed by the scanning acoustic microscope (SAM) and also, the fracture surfaces were observed by using the SEM (scanning electron microscope). In the case of impacted-side compression, fracture is propagated from the transverse crack generated near impact point. On the other hand, fracture is developed toward the impact point from the edge of interface-B delamination in the case of impacted-side tension. Eventually, failure mechanisms have been confirmed based on the observed delamination areas and fracture surfaces.

• Steel and Composite Structures
• /
• 제21권3호
• /
• pp.573-588
• /
• 2016

Carbon Fiber Reinforced Plastic (CFRP) and Titanium Alloy (Ti6Al4V) stack, extensively used in aerospace structural components are assembled by fasteners and the holes are made using drilling process. Drilling of stack in one shot is a complicated process due to dissimilarity in the material properties. It is vital to have optimal machining condition and tool geometry for better hole quality and tool life. In this study the tool wear and hole quality were analysed by experimental analysis using three modified twist drills and online tool condition monitoring using Acoustics Emission (AE) sensor. Helix angle and point angle influence tool performance and cutting force. It was found that a tool geometry (TG1) with high helix angle of $35^{\circ}$ with low point angle $130^{\circ}$ results in reduction in thrust force of 150-500 N range but the TG2 also perform almost similar to TG1, but when compared with the AErms voltage generated during drilling it was found that progressive rise in voltage in TG1 is less with respect to TG2 which can be attributed to tool life. In process wear monitoring was done using crest factor as monitoring index. AErms voltage were measured and correlated with the performance of the drills.