• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.339-340
• /
• 2023

Steel construction is one of the commonly used methods in building construction due to its efficiency in terms of time and cost. In particular, the top-down method using steel frames is widely used in the construction of underground structures in urban areas to shorten the construction period. However, there is currently no standardized cost estimation for subway steel frame construction in Korea, causing difficulties in determining the expected cost. In this study, we aim to provide basic data for establishing a cost estimation standard for subway steel frame construction through on-site surveys of subway steel frame construction commonly used in urban areas.

• 한국건설관리학회논문집
• /
• 제24권4호
• /
• pp.25-34
• /
• 2023

본 연구의 목적은 플랜트 건설에서 현장시공과 모듈시공에 대한 공사비를 산정하여 비교하는 것으로 공사비를 산정하는 대상을 Pipe Rack으로 한정하였다. 이에, 현장시공으로 준공된 국내 석유화학플랜트 건설사업 1곳을 사례로 선정한 후 비용자료를 조사하여 도출된 결과는 다음과 같다. Pipe Rack의 현장시공에 대한 직접공사비는 560억원으로 Steel Structure 251억원, Piping 308억원이며, 모듈시공에 대한 직접공사비는 607억원으로 Steel Structure 238억원, Piping 297억원으로 산정되었다. 또한, 현장시공과 모듈시공의 증감률을 비교해 보면, 재료비 1.9%, 경비 192.1% 증액되었으나, 노무비는 -9.1% 감액되어, 전체 직접공사비는 8.4%(47억원)가 증액되었다. 그리고 공사원가는 현장시공이 761억원, 모듈시공은 810억원으로 모듈시공이 6.4%(49억원) 증액되는 것으로 나타났다. 이와 같은 결과는 Pipe Rack을 모듈로 시공하는 경우 공사비가 증감되는 현황을 확인하기 위한 참고자료로 활용이 용이한 반면에, 모듈시공에 따른 간접적인 효과(노무인력 감소, 안전사고 발생 감소, 공사기간 단축 등)에 대한 연구가 필요하다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.93-96
• /
• 2007

Steel structure construction is the construction method which is plentifully used with reason of air shortening or the earthquake-proof efficiency improvement back. It is caused by with the feature which is a shop fabrication, it is more accurate than ferroconcrete construction when is a possibility of doing a materials supply and a crane work. From the research which it sees The instance analysis which uses the RFID it leads, A study is proposed an improvement plan of the RFID technology and an application plan of GPS.

• 대한안전경영과학회지
• /
• 제15권3호
• /
• pp.29-35
• /
• 2013

The research is to verify by experiments whether the steel truss structure is able to withstand the load of cement bricks of upper part of a door for the safe use of lightweight steel truss structure instead of concrete lintel which is to be installed at upper part of door frame in building cement bricks for apartment construction. The steel truss is designed in order not to disturb bricks-building and the shape of structure was verified by bending test. According to experiments result, camber was applied to steel structure that enabled construction work to be improved and was proved effective for the prevention of accidents by cement bricks-building load test.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.3-7
• /
• 2009

Construction projects are being the skyscraper and the large size by limited site condition and developing construction technology. Therefore, Steel structure work is steadily increasing caused by easy to work and structural safety. However, steel-frame work has the large incidence of heavy accident potentially. Recently a research group has recently developed newly designed self-supported steel joint for enhancing safety of steel erection work. Before applying the steel joint in a construction site, economic evaluation should be performed. Thus, we proposed the method for measuring economic efficiency of the new steel joint and verified economic feasibility of the steel joint method through a case study. As a result, Steel erection method using by self-supported steel joint showed economic rather than the one using by H-beams.

• 한국강구조학회 논문집
• /
• 제14권5호통권60호
• /
• pp.675-682
• /
• 2002

본 연구에서는 단부 철근콘크리트구조와 중앙부 철골구조로 이루어진 복합구조 보를 대상으로 내력 및 강성, 변형능력을 평가하기 위해 반복재하 실험을 행하였다. 주된 실험변수는 철근콘크리트와 철골보의 이종구조 이음부부의 응력전달을 위해 철골보에 접합되는 철근의 개수와 단부 콘크리트를 구속하여 강성을 상승시킬 목적으로 설치되는 부착판의 설치유무이다. 실험결과 모든 실험체가 방추형의 이력 거동을 나타내며 안정된 거동을 하였으며, 내력에 있어서는 부착판 설치 실험체의 경우가 기본형 실험체 보다 높게 나타났다. 또한, 강성에 있어서도 단부에 부착판을 설치한 실험체가 설치하지 않은 실험체에 비하여 보다 높게 나타났으며, 모든 실험체가 최대 내력시의 부재각이 0.03rad. 이상의 변형능력을 나타내고 있다.

• Steel and Composite Structures
• /
• 제32권3호
• /
• pp.347-359
• /
• 2019

Modular construction has been increasingly used for mid-to-high rise buildings attributable to the high construction speed, improved quality and low environmental pollution. The individual and repetitive room-sized module unit is usually fully finished in the factory and installed on-site to constitute an integrated construction. However, there is a lack of design guidance on modular structures. This paper mainly focuses on the evaluation of the initial stiffness of corrugated steel plate shears walls (CSPSWs) in container-like modular construction. A finite element model was firstly developed and verified against the existing cyclic tests. The theoretical formulas predicting the initial stiffness of CSPSWs were then derived. The accuracy of the theoretical formulas was verified by the related numerical and test results. Furthermore, parametric analysis was conducted and the influence of the geometrical parameters on the initial stiffness of CSPSWs was discussed and evaluated in detail. The present study provides practical design formulas and recommendations for CSPSWs in modular construction, which are useful to broaden the application of modular construction in high-rise buildings and seismic area.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.121-126
• /
• 2003

Steel frame construction is divided into subsidiary materials with column, beam, girder and bracing. After these are processed in factory for using installing in construction field. These prefabricated furniture is very important in accordance with design drawing about processing and prefabricating. In the case of design process using information transmission in blueprint, omission of material number, processing measure and finishing material, or discordance of each structure drawing and selecting incongruent structural material generated an error in the process of design. These error caused delaying tine and increasing cost and increasing safety accident in the steel-structure work operating process. therefore, design process should consider problem of operating process.

• 한국건축시공학회지
• /
• 제3권2호
• /
• pp.111-118
• /
• 2003

Steel frame construction is divided into subsidiary materials with column, beam, girder and bracing. After these are processed in factory for using installing in construction field. These prefabricated furniture is very important in accordance with design drawing about processing and prefabricating. In the case of design process using information transmission in blueprint, omission of material number, processing measure and finishing material, or discordance of each structure drawing and selecting incongruent structural material generated an error in the process of design. These error caused delaying time and increasing cost and increasing safety accident in the steel-structure work operating process. therefore, design process should consider problem of operating process.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1370-1376
• /
• 2009

Reinforcing steel works should be carefully controlled by the construction manager considering the severe fluctuation of the price of reinforcing steel bars and for the safety of structure in building constructions. In particular, preparing rebar placing drawings needs more effort and time than before because of the emergence of higher and more complicated buildings. Moreover, the experience of field engineers or foremen (fabricators or detailers) in preparing placing drawings gives rise to the differences in fabricated bar type and quantity of bars used. To address these problems, this study proposed the support system in preparing placing drawings for reinforcing steel works efficiency. In the near future, if this system can be made available on the web, multiple end-users will be able to share the result; the efficiency of rebar supply chain management will also be improved.