• 한국강구조학회 논문집
• /
• 제23권3호
• /
• pp.385-395
• /
• 2011

교량용 HSB 고성능 강재를 적용한 정모멘트부 강합성 복합단면 거더의 휨저항강도를 모멘트-곡률 해석법으로 산정하고 LRFD 휨저항강도 설계식에 의한 휨저항강도와 비교하여 기존 설계식의 적용성을 검토하였다. 강거더의 하부플랜지는 HSB800 강재를 상부플랜지와 복부판은 HSB600 강재를 적용하였다. 다양한 연성특성을 갖는 6,205개 단면을 임의추출법으로 선정하고 재료 비선형 모멘트-곡률 해석 프로그램을 이용하여 이들 단면에 대한 휨저항강도를 구하였다. 합성단면을 구성하는 콘크리트 재료는 CEB-FIP 모델로, HSB600 및 HSB800 강재는 탄소성-변형경화 재료로 모델링하였으며 콘크리트 바닥판의 압축강도는 30MPa, 45MPa 및 60MPa를 고려하였다. HSB 강재를 적용한 강합성 복합단면 거더의 연성계수와 콘크리트 바닥판의 압축강도에 따른 휨저항강도 특성을 분석하였다. HSB 고성능강을 적용한 이종 복합단면 강합성 거더의 모멘트-곡률해석 결과, 현 AASHTO LRFD 정모멘트부 휨저항강도 산정식을 적용할 수 있는 것으로 평가되었다.

• Steel and Composite Structures
• /
• 제32권2호
• /
• pp.189-198
• /
• 2019

This paper aims to study the mechanical performance of three-tower four-span suspension bridges with steel truss girders, including the static and dynamic characteristics of the bridge system, and more importantly, the influence of structural parameters including the side-main span ratio, sag-to-span ratio and the girder stiffness on key mechanical indices. For this purpose, the Oujiang River North Estuary Bridge which is a three-tower four-span suspension bridge with two main spans of 800m under construction in China is taken as an example in this study. This will be the first three-tower suspension bridge with steel truss girders in the world. The mechanical performance study and parametric analysis are conducted based on a validated three-dimensional spatial truss finite element model established for the Oujiang River North Estuary Bridge using MIDAS Civil. It is found that a relatively small side-main span ratio seems to be quite appropriate from the perspective of mechanical performance. And decreasing the sag-to-span ratio is an effective way to reduce the horizontal force subjected to the midtower and improve the antiskid safety of the main cable, while the vertical stiffness of the bridge will be reduced. However, the girder stiffness is shown to be of minimal significance on the mechanical performance. The findings from this paper can be used for design of three-tower suspension bridges with steel truss girders.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.508-514
• /
• 1997

RCS system consists of RC columns and Steel girders. Because RC columns are useful for compression and steel girders are for bending moment, RCS system has good structural performances. This system, however, has had no verification in the onstruction fields. This paper is a feasibility study on RCS system to verify the structural and economic efficiency of RCS system. On this study, we analyze 18 models selected by existing building data survey, and design these models as steel system,SRC system (Steel + RC system) and RCS system. To verify the economic efficiency of RCS system, we estimate the columns of these models. And we predict the construction procedure of RCS system to compare construction duration of RCS system with others So, in this study we find that RCS system is more economic than steel system and SRC system.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.519-524
• /
• 2002

The long span PSC deck of composite girder bridge should be needed in order to improve the endurance and to simplify the structure of the steel bridge. However, there have been few domestic research activities about long-span PSC decks for the steel bridges with a small number of girders. In this study, a literature survey is performed to develop a new deck system for the steel bridge with a small number of girders. By considering the characteristics of a small number of girders bridge system, a cast-in-place long span PSC deck is proposed for a small number of girders bridges. To examine structural behavior and safety of the proposed PSC deck, the real scale partial models of the deck(12m$\times$3.2m) are tested under the static loading. In the test, the failure mode and behavior of each specimen, and ultimate load carrying capacity of the proposed PSC deck are identified.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.766-769
• /
• 2004

This paper presents 3D nonlinear analysis considering the slip of composite section as well as the static load tests of PSC-Steel hybrid girders. According to the slip modulus, the nonlinear analysis shows that the behavior of hybrid girders could be divided into three parts as full-composite, partial-composite and non-composite. However, the experimental results show that the PSC-Steel hybrid girders with shear connectors take the part of partial composite action in ultimate load stage. In addition, the load test results give that stud shear connectors and welded reinforcements have contributed to improve the ultimate strength of hybrid girders for about $20\%$.

• Steel and Composite Structures
• /
• 제10권4호
• /
• pp.297-315
• /
• 2010

This paper is concerned with free vibration characteristics and natural frequency of horizontally curved composite plate girder bridges. Three-dimensional finite element models are developed for the girders using the software package LUSAS and analyses carried out on the models. The validity of the finite element models is first established through comparison with the corresponding results published by other researchers. Studies are then carried out to investigate the effects of total number of girders, number of cross-frames and curvature on the free vibration response of horizontally curved composite plate girder bridges. The results confirm the fact that bending modes are always coupled with torsional modes for horizontally curved bridge girder systems. The results show that the first bending mode is influenced by composite action between the concrete deck and steel beam at low subtended angle but, on the girders with larger subtended angle at the centre of curvature such influence is non-existence. The increase in the number of girders results in higher natural frequency but at a decreasing rate. The in-plane modes viz. longitudinal and arching modes are significantly influenced by composite action and number of girders. If no composite action is taken into account the number of girders has no significant effect for the in-plane modes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.285-290
• /
• 2002

The double composite box girder is a structural system filled with concrete at the bottom of the steel box in the negative moment region increasing the flexural strengths. Flexural strengths of the double composite steel box girders are investigated through a series of the experimental tests and the numerical analysis. The experimental tests are performed on the three kinds of steel box girders with the different concrete depths including loom, 15cm, and 20cm. Moment-curvature relations are calculated based on the sectional analysis method describing the nonlinear natures of concrete and steel. In the finite element analysis the nonlinear nature of concrete is described based on the three dimensional four-parameter constitutive model recently developed and that of steel is described based on von Mises failure criterion. The ultimate flexural capacities of the box girders predicted using sectional analysis and finite element analysis show good agreement with those of the experiments.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.402-405
• /
• 2006

Inner support regions of continuous steel and concrete composite bridge decks, transverse crackings are easely developed by tensile forces due to live loads and primary and secondary effects of concrete shrinkage. Since these cracks have an influence on the durability of bridge decks, crack width should be controlled within allowable limit values. Although crack width is a function of steel stress, bar diameter, bar spacing, etc, the current code for the amount of longitudinal reinforcements provides only one value of 2 percent of the concrete area. In order to investigate cracking bahaviors of composite girders with the variation of the longitudinal steel ratios, negative flexural tests are conducted on five composite girders and crack width and crack spacing are compared to ACI Code and Eurocode. Based on the test results, it is discussed the suitability of the current code for the longitudinal steel ratio.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.428-433
• /
• 1999

In this study, new finite clement formulations are carried out to analyze the distortion of the curved steel box girders which are susceptible to the torsional loading. For the exact analysis of curved box girders, additional degrees of freedom are added besides the conventional 6 degrees of freedom of general-purpose finite analysis programs, which are torsional warping, distortional warring, and distortion. New formulations were coded into a computer programs. Several numerical examples were presented to demonstrate the validity of developed program.

• 한국강구조학회 논문집
• /
• 제22권5호
• /
• pp.465-475
• /
• 2010

곡선교량시스템에서 거더는 편심하중이 없어도 교량이 가지는 곡률 자체로 인하여 휨 및 비틀림 거동을 하게 된다. 휨과 비틀림을 동시에 받는 강/콘크리트 합성 박스거더는 St. Venant 비틀림에 의해 콘크리트 바닥판에 발생하는 사인장 응력에 의해 그 극한강도가 제한된다. 합성 박스거더의 극한강도를 얻기 위하여 유한요소해석 패키지 프로그램 ABAQUS을 이용하여 재료 및 기하 비선형성뿐 아니라 콘크리트 균열후 거동 등이 고려된 비선형해석을 수행하였다. 또한 구조해석 이론에 근거한 해석적 방법론으로 합성 박스거더의 휨과 비틀림에 대한 극한강도 상호 작용이 고려된 수식을 유도하여 수치해석 결과와 비교하였다. 휨 거동에 의해 정모멘트 구간 박스거더 상부에 발생하는 종방향 압축응력은 바닥판 콘크리트의 전단강도를 일정부분 향상시켜 결과적으로 전체 박스거더의 비틀림강도가 향상되는 효과가 확인되었다. 유한요소해석 및 구조해석 이론 전개의 결과에 근거하여 강합성 박스거더의 극한강도 상호작용을 예측하는 간편한 형태의 수식이 제안되었다.