• Macromolecular Research
• /
• v.16 no.2
• /
• pp.178-181
• /
• 2008

Polystyrene (PS) nanospheres with a monodisperse size distribution, positive surface charge and high molecular weight were successfully synthesized using various types of metal stearates in an aqueous NaOH medium. The diameter of the PS nanospheres was controlled from 80 to 450 nm by changing the type of metal stearate. It was also found that controlling the NaOH concentration in solution was important for producing monodisperse PS nanoparticles. The nanospheres prepared with zinc stearate possessed a positive surface charge of 60 to 80 mV, confirming that PS particles were functionalized with metal stearates. It is believed that the metal stearates provide PS particles with not only colloidal stability but also a positive surface charge.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1216-1220
• /
• 1999

Different amounts of zinc stearate were incorporated as a plasticizer into poly(styrene-co-sodium methacrylate) ionomers prepared by bulk-suspension plymerization and neutralization with sodium hydroxide and effects of the zinc stearate on the thermal and rheological properties were investigated. It was obseved that the crystallization of zinc stearate in the ionomers were partially suppressed depending on the content of ionic moieties. It is postulated that the ionic moieties dissolved zinc stearate and suppressed crystallization of the zinc stearates. We speculated that 0.4~0.6 mole of zinc stearate was dissolved by one mole of the ionic moiety. Poly(styrene-co-sodium methacrylate) containing only the dissolved zinc stearates showed typical rheological properties of homogeneous systems in Cox-Mertz plots. However, poly(styrene-co-sodium methacrylate) containing crystallizable zinc stearates as well as dissolved ones showed typical rheological properties of heterogeneous systems.

• Korea-Australia Rheology Journal
• /
• v.15 no.4
• /
• pp.173-178
• /
• 2003

Boron nitride is a new processing aid that is capable of eliminating gross melt fracture in several polymer processing operations. Its combinations with other processing aids i.e. fluoropolymers offer additional possibilities of obtaining enhanced processing aids that may take the processes to rates not realized before. A variety of different such combinations are discussed in this paper. The essential componenets are (1) boron nitride capable of eliminating gross melt fracture and (2) suitable lubricant capable of eliminating surface melt fracture such as stearates for the polyolefin processing and polyethylenes for the processing of fluoropolymers.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.102-107
• /
• 1999

This study is to develop a self waterproof agent by varying the addition ratios of silica fumes and zinc stearates. As the experimental results, it shows a possibility to produce a high performance self waterproof agent which performs a better properties in workability, strength, waterproof, dry-shrinkage and cost, if it is manufactured with silica fumes to zinc steartes ratios of 1 : 2 and mixed 6kg per 1㎥ into concrete mixtures.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.154-158
• /
• 2001

The heat treatment of PVC film containing PVC 65%, DOP(Dioctyl Phthalate) 32% as plasticizer, Ca-Zn stearates and surface agent was peformed under several conditions to study the degradation behavior of PVC sheet. In the case of H$_2$SO$_4$, the dehydrochlorination was ca.100% at 25$0^{\circ}C$ for 3h. The char involving the smaller pores was produced with hydrothermal treatment. The pore size became small with increasing the treatment time and temperature. In the case of treatment with Ca(OH)$_2$, the sizes of pores produced in char were about sever ~ 10${\mu}{\textrm}{m}$ at 2$25^{\circ}C$ for 12h. In the case of H$_2$SO$_4$, the size of pores were about 1${\mu}{\textrm}{m}$ in 5M H$_2$SO$_4$for 12h.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.746-750
• /
• 2001

The heat treatment of PVC film containing PVC 65%, DOP(Dioctyl Phthalate) 32% as plasticizer, Ca-Zn stearates and surface agent was peformed under several conditions to study the degradation behavior of PVC sheet. In the case of H$_2$SO$_4$, the dehydrochlorination was ca.100% at 25$0^{\circ}C$ for 3h. The char involving the smaller pores was produced with hydrothermal treatment. The pore size became small with increasing the treatment time and temperature. In the case of treatment with Ca(OH)$_2$, the sizes of pores produced in char were about sever ~ 10${\mu}{\textrm}{m}$ at 2$25^{\circ}C$ for 12h. In the case of H$_2$SO$_4$, the size of pores were about l${\mu}{\textrm}{m}$ in 5M H$_2$SO$_4$for 12h.

• Analytical Science and Technology
• /
• v.19 no.3
• /
• pp.189-193
• /
• 2006

Chromatographic separation of glycerol monostearate, glycerol distearate and glycerol tristearate (GMS, GDS, and GTS) has been performed by normal phase HPLC method utilizing a Zorbax silica ($250{\times}4.6mm$, $5{\mu}m$) column and hexane-hexane, IPA and ethyl acetate mixtures as the eluent within 20 min. The observed reproducibility was less than 5% RSD, Suggesting that ELSD was an effective tool for detection of the glycerol stearates of low volatility without chromophore. The detection limits were in the concentration range of 0.3~2 mg/L, and the calibration curves (the log-log plots) were linear in the range of 4~1000 mg/L (with the slopes of 1.06~1.32). The application of the analytical procedure without pretreatment demonstrated that the proposed chromatographic method would be practical for a routine analysis of commercial products.

• Macromolecular Research
• /
• v.17 no.10
• /
• pp.776-784
• /
• 2009

N,N-dimethyldodecylamine (tertiary amine)-modified MMT (DDA-MMT) was prepared as an organically modified layered silicate (OLS), after which styrene-butadiene rubber (SBR) nanocomposites reinforced with the OLS were manufactured via the latex method. The layer distance of the OLS and the morphology of the nanocomposites were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). By increasing the amount of N,N-dimethyldodecylamine (DDA) up to 2.5 g, the maximum values of torque, tensile strength and wear resistance of the SBR nanocomposites were increased due to the increased dispersion of the silicate layers in the rubber matrix and the increased crosslinking of the SBR nanocomposites by DDA itself. When SBR nanocomposites were manufactured by using the ternary filler system (carbon black/silica/OLS) to improve their dynamic properties as a tire tread compound, the tan $\delta$(at $0^{\circ}C$ and $60^{\circ}C$) property of the compounds was improved by using metal stearates instead of stearic acid. The mechanical properties and wear resistance were increased by direct substitution of calcium stearate for stearic acid because the filler-rubber interaction was increased by the strong ionic effect between the calcium cation and silicates with anionic surface. However, as the amount of calcium stearate was further increased above 0.5 phr, the mechanical properties and wear resistance were degraded due to the lubrication effect of the excessive amount of calcium stearate. Consequently, the SBR/organoclay nanocomposites that used carbon black, silica, and organoclay as their ternary filler system showed excellent dynamic properties, mechanical properties and wear resistance as a tire tread compound for passenger cars when 0.5 phr of calcium stearate was substituted for the conventionally used stearic acid.

• Resources Recycling
• /
• v.10 no.1
• /
• pp.25-31
• /
• 2001

The heat treatment of PVC film containing PVC 65ft, DOP (Dioctyl Phthalate) 32% as plasticizer, Ca-Zn stearates and sur-face agent was performed under several conditions to study the dehydrochlorination of PVC and char production. In the case of $H_2$ $SO_4$, the dehydrochlorination was ca.100% at $250^{\circ}C$ for 3h. The char involving the smaller pores was produced with hydro-thermal treatment. The pore size became small with increasing the treatment time and temperature. In the case of treatment with $Ca(OH)_2$, the sizes of pores produced in char were about sever ~10 $\mu\textrm{m}$ at$ 225^{\circ}C$ for 12h. In the case of $_2$$SO_4$, the size of pores were about 1 $\mu\textrm{m}$ in 5M $_H2$$SO_4$for 12h.

• The Plant Pathology Journal
• /
• v.26 no.4
• /
• pp.360-366
• /
• 2010

In the course of a searhing environmental friendly antifungal compounds, we found that mixture of methyl esters of fatty acids obtained from soybean oil had potent control efficacy against barley powdery mildew (Blumeria graminis f. sp. hordei). In this study, ten alkyl fatty acid esters (AFAEs) were tested for in vivo antifungal activity against five plant diseases such as rice blast, rice sheath blight, tomato gray mold, tomato late blight and barley powdery mildew. Some AFAEs showed the most control efficacy against barley powdery mildew among the tested plant diseases. By 5-hr protective and 1-day curative applications, six AFAEs ($3,000\;{\mu}g/ml$), including methyl and ethyl palmitates, methyl and ethyl oleates, methyl linoleate, and methyl linolenate demonstrated both curative and protective activities against barley powdery mildew. In contrary, methyl laurate strongly controlled the development of powdery mildew on barley plants by curative treatment at a concentration of $333\;{\mu}g/ml$, but did not show protective activity even at $3,000\;{\mu}g/ml$. Under greenhouse conditions, the seven AFAEs ($1,000\;{\mu}g/ml$) except for methyl and ethyl stearates, and methyl caprylate also effectively controlled cucumber powdery mildew caused by Podosphaera xanthii. Among them, methyl and ethyl palmitates ($333\;{\mu}g/ml$) represented the most control activity of more than 68% against the disease. The results are the first report on the antifungal activity of methyl and ethyl esters of fatty acids against plant pathogenic fungi.