• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.8
• /
• pp.1184-1188
• /
• 2011

This study analyzed changes in the texture and salt content of Chinese cabbage after salting using different methods to determine the effects of low salt brining. To verify the possibility of brining under low salt concentration, Chinese cabbage was salted with 1%, 2%, 6%, and 10% salt solutions by pressing, pressure reduction, or steaming. After salting, the firmness (g, determined using the puncture test) of the Chinese cabbage changed according to the brining methods used, however, an increasing trend in rigidity was observed as the salinity increased. Because the power applied during pressing or pressure reduction treatments is higher, the firmness of and penetration time on the surface of the brined Chinese cabbages after these treatments increased more in the 6% salt solution cabbage. Additionally, the Chinese cabbages treated with steam showed significantly higher firmness and penetration time than those treated by pressing and pressure reduction. As a result of pressing the 6% salt concentrated cabbage with 1.35 $kg{\cdot}f/cm^2$, a pressure reduction from 250 mmHg, and steaming at 100$^{\circ}C$ for 1 min, the cabbage had roughly 2% of the salt concentration, ultimately. These physical treatments of pressing, pressure reduction, and steaming could be used as new methods for preparing salted Chinese cabbage with low salt concentrations for general use.

• Korean Journal of Breeding Science
• /
• v.51 no.4
• /
• pp.386-394
• /
• 2019

Rehmannia glutinosa, one of the major medicinal crops in Korea, can be classified into three types: fresh, dried and prepared Rehmannia root. In this study, the quality characteristics of prepared rehmannia root were evaluated using four different cultivars that are commonly used in the market. In making prepared rehmannia root, roots of Jihwang 1, Kokang, Togang, and Dagang were dried, soaked in rice wine, and steamed nine times. At each stage, physiochemical properties were analyzed, including yield, which is one of the most important industrial factors to consider. The yield was the highest in Togang at 23.61% and the lowest in Dagang at 21.16%. These yield values showed a highly negative correlation with the moisture content of roots. The fructose and glucose contents were increased during the 3^rd, 4^th and 5^th steaming but then decreased. The sucrose, raffinose, and stachyose content gradually decreased during the first three steaming and were not detected during the 4^th steaming. Additionally, the catalpol content was not detected after the 4^th steaming. On the contrary, the 5-hydroxymethylfurfural content was not detected in the raw root but increased during the steaming. Jihwang1 and Togang exceeded the 0.1% Korean Pharmacopoeia standard after the 5^th steaming, reaching it faster than did the other cultivars. Overall, Togang was the optimal cultivar considering the overall characteristics of its high yield and short steaming time. These results could provide useful information for the industrial use of prepared Rehmannia root based on the requirements and characteristics of each cultivar.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.4
• /
• pp.520-531
• /
• 2007

In this study, we found that the moisture content of black sesame seeds increased in proportion to steaming time, and it decreased in reverse proportion to the roasting temperature and time. The crude fat and crude ash contents were shown to be in the order of steamed black sesame>raw black sesame and roasted black sesame>raw black sesame, Crude protein decreased in reverse proportion to the steaming time, and more crude protein was found in the raw black sesame samples than in the roasted black sesame samples. The contents of sesamin, sesamolin, and total lignans were shown to be in the order of roasted black sesame>raw black sesame>steamed black sesame. In the steamed black sesame samples, sesamin showed its highest level with 20 minutes of treatment, and sesamolin showed its highest level with 15 minutes of treatment. In the roasted black sesame samples, sesamin, sesamolin, and total lignans showed their highest levels with 15 minutes of treatment at $100^{\circ}C$. The phenolic compound content increased in proportion to steaming time in the steamed samples, and reached a peak after 15 minutes of treatment at $100^{\circ}C$, and then decreased after 20 minutes. SOD-like activity reached a peak after 15 minutes of treatment, and in the roasted sample it reached a peak after 15 minutes of treatment, and then decreased after 20 minutes. SOD-like activity was comparatively lower than tocopherol and higher than sesamol. The intensity of electron donating ability, following 30 minute treatments, was shown to be highest in the steamed black sesame samples after 25 minutes of treatment, and next highest in the roasted black sesame samples after 15 minutes at $100^{\circ}C$. The electron donating ability was comparatively lower than tocopherol and sesamol. With regard to lecithin's antioxidant effects, the steamed samples showed a higher oxidation restriction rate in proportion to time, and the roasted samples showed the highest rate after 15 minutes of treatment, and then decreased after 20 minutes of treatment. for hydroxyl radical scavenging, similar scavenging activity to tocopherol, and comparatively higher scavenging activity than sesamol, was shown in all samples: all samples showed scavenging abilities of 90% or higher. In summary, this study applied three different treatment methods to black sesame to determine the optimum treatment conditions, and also examined the antioxidant effects and functional characteristics. The results showed that roasting can be used for other purposes than producing oil, and also suggested that methods other than roasting can be used in a variety of ways in cooking. Also, the different treatment methods can be applied in cooking in a variety of ways, to enhance functionality and preference.

• YAKHAK HOEJI
• /
• v.57 no.5
• /
• pp.323-329
• /
• 2013

This study was designed to determine and compare the cognitive enhancing effect of various Codonopsis lanceolata extracts by steaming, fermentation and high hydrostatic pressure process. We prepared water extract of C. lanceolata, steamed C. lanceolata, steamed and fermented C. lanceolata and C.lanceolata by high hydrostatic pressure process and fermentation. Cognitive enhancing effect of extracts was evaluated in scopolamine-induced memory impairment mice using by passive avoidance test and Morris water maze tests. MTT assay was conducted to investigate neuroprotective effect on glutamate induced cell death in HT22 cells. Steamed and fermented C. lanceolata water extract decreased escape latency in Morris water maze test and increased the latency time of the passive avoidance test compared to other extracts. Furthermore, the steamed and fermented C. lanceolata water extract showed neuroprotective effect. These results suggest that steaming and fermentation process more improve cognitive enhancing effect of C. lanceolata than other process.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.17-24
• /
• 2005

Korean pine (Pinus koraiensis Sieb.et Zucc.) boards of 30 mm thickness were treated by steaming and four different drying methods. Small specimens were taken from the sapwoods of the treated boards and their longitudinal liquid permeability was measured according to Darcy's law. The specimens were also extracted with alcohol and aceton solutions to examine the mechanism of liquid flow in wood. It was observed that specific permeability drastically decreases with measurement time, resulting in violation of Darcy's law. It may be due to that air bubbles formed under vacuum block flow paths in resin canals. The average specific permeabilities of non-extracted and extracted specimens are different from one treatment to another. It is supposed that the properties of residual resin in resin canals change depending on the conditions of treatments. Anatomical examination was conducted with a scanning electron microscope.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.4
• /
• pp.26-40
• /
• 1990

The plane trees(Platanus occidentalis L.) have been grown in Korea very widely as ornamental garden or street trees but they have not been used as manufacturing materials The proportion of imported wood has been now over 85% of raw materials needed in the wood industry, and therefore, many of studies on the substitution of domestic wood for imported wood and on the increasing the utilization rate of domestic species have been attempted and considered as very important projects to solve. From a this point of view, this study was carried out to investigate solid wood bending properties of plane trees and then to develop their end-uses, and the size of specimens tested was $15\times15\times350mm$ for steaming treatment and they were dried to $15\pm1%$ before bending. The results obtained were as follows: 1. The optimum conditions for solid wood bending processing of Platanus occidentalis are showed in Table 7. 2. The minimum solid-bending radii of Platanus occidentalis were 40mm in steaming treatment. 3. The effect of knots, diagonal grain and decay on the degradation of bending processing properties were very severe. 4. The bending stress was setted successfully through $80^{\circ}C$-15hrs drying after bending and the spring back for 24hr-exposing time was only about 1%.

• Food Science and Preservation
• /
• v.14 no.6
• /
• pp.605-610
• /
• 2007

The quality of guava (Psidium guajava L.) leaves processed using different methods, such as fermentation, steaming, and roasting were investigated. The total phenolics content was highest in the roasted guava leaves. While tyrosinase inhibition and electron donating abilities were highest in steamed guava leaves. The overall palatability showed higher scores in both fermented and steamed guava leaves compared to roasted ones. Upon blanching and steaming of guava leaves, the total phenolics content, tyrosinase inhibition ability, and electron donating ability decreased as the treatment time increased. The overall quality properties were significantly higher in steamed than the blanched samples. The sensory scores, however, were low mainly due to the astringent taste of guava leaves. Thus, it was found that the removal or masking of the astringent taste of guava leaves is of primary concern for their further use.

• Korean Journal of Plant Resources
• /
• v.25 no.4
• /
• pp.473-481
• /
• 2012

This study was conducted to investigate the contents of ginsenosides and physiochemical properties of Panax ginseng after 9 times steaming and drying treatment by using the new auto steamer which is more fast and simple than previous report. In the process of steaming and drying, the content of six major ginsenosides such as Rg1, Re, Rb1, Rc, Rb2 and Rd were gradually decreased. On the other hand, the content of seven minor ginsenosides includes Rh1, 20(S)-Rg2, 20(R)-Rg2, 20(S)-Rg3, 20(R)-Rg3, Rk1 and Rg5 were gradually increased. We observed the protopanxadiol ginsenosides such as Rb1, Rb2, Rc and Rd were converted into 20(S)-Rg3, 20(R)-Rg3, Rk1 and Rg5; similarly protopanxatriol ginsenosides of Rg1 and Re were converted into Rh1, 20(S)-Rg2 and 20(R)-Rg2. Based on the result of fresh ginseng, the contents of reducing sugar, acidic polysaccharide and total phenolic compounds were gradually increased and reached to maximum at 7 times repetitive steaming process of the fresh ginseng. Whereas DPPH radical scavenging activities were gradually decreased to 68% at 7 times steaming. New auto 9 repetitive steaming and drying process has similar production with original methods, but content of benzo(a)pyrene were not almost detected comparatively taking less time. The present results suggested that this method is best for the development of value-added ginseng industry related products.

• Applied Biological Chemistry
• /
• v.30 no.3
• /
• pp.210-218
• /
• 1987

In the previous report, we isolated and purified one of tendering enzyme 'ficin' from fig latex. In this study, various crude ficin concentrations and reaction time were employed to investigate the contents of free amino acids and other free nitrogen compounds after the treated with beef round muscle. 1. Free amino acids contents increased with the increase of temperature and time during the aging of beef at $1^{\circ}C$ and $8^{\circ}C$, and the increasing rate was remarkably high when fresh beef was treated with ficin. In the case of ficin treatment after various cooking, steaming showed the highest increase in free amino acid contents among three cooking methods such as boiling, steaming and pan broiling. The increased amounts of free amino acids in three groups-aging beef at $1^{\circ}C$ for 3 days, fresh beef treated with ficin(0.1%, 2hrs) and beef treated with ficin(0.1%, 2hrs) after cooking were 13%, 293% and 137% respectively. In contrast to aging group, the amount of free amino acids in other two groups treated with ficin was superiorly increased. 2. The amounts of total free nitrogen, free non-protein nitrogen and $NH_3-nitrogen$ increased with the increase of temperature and time during the aging of beef at $1^{\circ}C$ and $8^{\circ}C$, and the increasing rate was remarkably high in fresh beef treated with ficin. In the case of ficin treatment after cooking, steaming gave larger amount of total and non-protein nitrogen than other two cooking, e.g. boiling and panbroiling. The increasing rate of nonprotein nitrogen to the total nitrogen of fresh beef treated with ficin(0.1%, 2hrs) was 75 times greater than that of aging fresh beef at $1^{\circ}C$ for 3 days.

• Journal of the Korean Home Economics Association
• /
• v.38 no.9
• /
• pp.119-130
• /
• 2000

The purpose of this study was to confirm the possibility of screen printing with Natural dyes. The coloring matter such as sappan wood was used in order to obtain the colorant powder through the processes of extraction, low pressure concentration and the spray dry. After the screen printing on silk and cotton fabrics with colorant, K/S value changes of color and color fastness were measured. The main resets were as follows : 1. The viscosity of printing thickeners of sappan wood powder was about 15,200 cps, and the highest K/S value of the fabrics printed with sappan wood was obtained at 90$\pm$2$\^{C}$ of steaming temperature and 80 minutes of steaming time. 2. For the fabrics printed with sampan wood, adding of urea was not effective, since the more the concentration of urea increased, the more K/S values decreased. 3. For the natural dyes printing, the more the concentration of colorants increased, the more K/S values increased. In general, the K/S values of the printed fabrics were higher when treated with mordants rather than without mordants. Specifically, the λmax sappan wood was 520∼570 nm, and the K/S value was highest when treated with Cu mordant and lowest when treated with Sn. 4. Generally, the color fastness was relatively fair.