• 수산해양기술연구
• /
• 제39권4호
• /
• pp.251-261
• /
• 2003

기선장에 따른 GPS 위치 정도 및 분포를 측정하기 위하여 2002년 5월 29일부터 6월 2일까지 2대의 GPS수신기 (L1, 12채널)를 이용하여 고정점에서 30분에서 24시간동안 관측하는 실험을 수행하였다. 기준국(PKNU)과 이동, 국립지리원의 GPS 상시관측소에서 수신한 GPS 데이터는 동적 및 정적 후처리방식으로 처리하였으며, 그 결과를 요약하면 다음과 같다. 1. 2002년 5월 31일 차단각 (cut-off angle) $15^{\circ}$에서 6시간 이상 관측 가능한 위성은 16개였고, 위성은 주로 동서방향으로 배치되어 있었다. 10분마다 평균한위성 수와 GDOP는 각각 8개, 3.89이었다. 2. 후처리 전후의 GPS 평균위치는 모두 기준점에서 남서쪽으로 편위 (단독 측위 : 1.17m, 후처리 : 평균 0.43m)되었다. 확율원 오차는 단독 측위가 6.65m이었고 이를 동적 후처리하면 단독 측위의 약 33.8%(표준편차 0=17.2), 정적 후처리하면 단독 측위의 약 5.3% (0=2.2)로 감소시 킬 수 있었다. 3. 정적 후처리방식으로 구한 기선장 x(Km)와 확률원 오차 y(m) 의 관계식은 y = 0.0016x + 0006 $(R^2=0.87)$이었다. 본 연구에서 사용한 1주파용 GPS 수신기를 이용하여 정적 후처리방식으로 위치를 측정하는 경우, 기선장을 100Km 이내로 하고 GPS 수신시간을 30분 이상으로 하면 확율원 오차 20 Cm 이내의 측위가 가능함을 알 수 있었다.

• 한국군사과학기술학회지
• /
• 제6권1호
• /
• pp.49-58
• /
• 2003

Compared with generic GPS receiver, post-processing software GPS receiver has many advantages for high dynamic vehicle tracking. It has the advantage of the application of various tracking algorithms and aiding schemes. The post-processing system observes the carrier phase measurement data from the recorded GPS signals, detects and isolates the cycle slip. The observed carrier phase data and the raw data of the reference station are processed by carrier phase DGPS scheme. And the integer ambiguity resolution algorithm is used for resolving single frequency carrier phase ambiguity. The results of static and real flight test are presented and show that the proposed GPS translator processing system satisfies submeter accuracy.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.823-833
• /
• 1996

An ultimate purpose of this study is to develop an automatic brown rice quality inspection system using image processing technique. In this study emphasis was put on developing an algorithm for discriminating the brown rice kernels depending on their external quality with a color image processing system equipped with an adaptor for magnifying the input image and optical fiber for oblique illumination. Primarily , geometrical and optical features of sample images were analyzed with unhulled paddy and various brown rice kernel samples such as sound, cracked, green-transparent , green-opaque, colored, white-opaque and brokens. Secondary, an algorithm for discrimination of the rice kernels in static state was developed on the basis of the geometrical and optical parameters screened by a statistical analysis(STEPWISE and DISCRIM Procedure, SAS ver.6). Brown rice samples could be discriminated by the algorithm developed in this study with an accuracy of 90% to 96% for the sound , cracked, colored, broken and unhulled , about 81% for the green-transparent and the white-opaque and about 75% for the green-opaque, respectively. A total computing time required for classification was about 100 seconds/1000 kernels with the PC 80486-DX2, 66MHz.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 춘계학술발표회 논문집
• /
• pp.55-60
• /
• 2003

As the distance between GPS rover station and GPS base station increases, more decorrelated positioning errors limit the ability for PDGPS(Precise Differential GPS). The objective of this paper is to present the improvement of using VRS(virtual reference station) based on multiple GPS reference station network to single reference station for static positioning in post-processing mode. For this, the VRS observations from GPS observations of real reference stations are derived by using Web service in post-mode. The coordinates of check point post-processed by 27 kind of VRS observations compared with the known ones.

• Nuclear Engineering and Technology
• /
• 제39권2호
• /
• pp.123-128
• /
• 2007

In order to apply a static fault-tree (FT) method to a system or a plant whose configuration changes dynamically, condition gates and a post processing method are used to effectively accommodate these changes. An operator's performance change, which can be caused by these configuration changes, should also be considered to assess the risk to a plant in a more realistic manner. This study aims to develop an integrated framework to accommodate various configuration changes and their effect on an operator’s performance by using the FT model. We applied a condition-based human reliability assessment (CBHRA) method to consider various conditions endured by an operator. That is, we integrated the CBHRA method with the conventional post processing method for modeling the system configuration changes. The effect of the condition monitoring systems installed in a plant is also considered. In this study, we show an example application of the integrated framework to a probabilistic safety assessment for the shutdown phase of a nuclear power plant.

• International Journal of Contents
• /
• 제11권3호
• /
• pp.7-13
• /
• 2015

One of the biggest problems of skeletonization is the occurrence of distortions at the junction point of the final binary image. At the junction area, a single point usually becomes a small stroke, and the corresponding trajectory task, as well as the OCR, consequently becomes more complicated. We therefore propose an adaptive post-processing method that uses an adaptive threshold technique to correct the distortions. Our proposed method transforms the distorted segments into a single point so that they are as similar to the original image as possible, and this improves the static handwriting images after the skeletonization process. Further, we attained promising results regarding the usage of the enhanced skeletonized images in other applications, thereby proving the expediency and efficiency of the proposed method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.207-210
• /
• 2006

Behavior of dynamic/static recrystallization during hot deformation of Cast alloy 718 was investigated. For this purpose, hot compression test and FE-simulation were conducted via Thermecmaster-Z and DEFORM-3D, respectively. The microstructural evolution during hot compression and post heat-treatment was investigated and deformation mechanism were analyzed by stress-strain curve, FE-simulation and microstructure. FE-simulation results show that the temperature difference between top-die and billet has considerable influence on the final shape of compressed specimen. The relation between applied load and processing time was predicted by the FE-simulation.

• 한국측량학회지
• /
• 제17권3호
• /
• pp.301-309
• /
• 1999

후처리 없이 cm 정확도의 3차원 좌표를 취득할 수 있는 실시간 이동측량 기법은 GPS 기술에서 중요한 진전으로 인식되어왔다. 이 시스템은 OTF 초기화기법을 이용함으로써 종래의 정지측량 및 이동측량 접근법에서 주요 방해요인으로 작용해 왔던 싸이클슬립 문제로부터 벗어날 수 있게 되었다. 본 연구에서는 실시간 이동 GPS 측량의 정확도를 평가하기 위한 목적으로 우선 일정기선에 대한 연속관측을 행하고 정지측량의 결과와 비교한 결과 수평 및 수직성분에서 각각 RMS $\pm{3mm}$와 $\pm{13mm}$의 반복재현성을 확인할 수 있었다. 또한 30점으로 구성된 소지역의 시험망에 대하여 실시간 이동, 후처리 이동, 신속정지 GPS 및 종래의 기법으로 각각 측량을 행하여 그 결과를 비교 분석하고 실시간 이동측량 기법의 효율성을 검토하였다. 이울러 GPS와 직접수준측량 성과의 조합에 의해 유도된 지오이드고를 PNU95와 EGM96 중력지오이드 모델에 의한 결과와 비교하였다.

• 한국소음진동공학회논문집
• /
• 제19권11호
• /
• pp.1126-1132
• /
• 2009

Bridge structures are designed to support ordinary loadings such as vehicles, wind, temperature and current as well as unexpected loadings like earthquakes and storm. Especially, the displacement of Flexible bridges like an suspension bridge under ordinary loading conditions is necessary to be monitored. In case of long span bridges, there are some difficulties in monitoring the displacement of center of the main span using traditional laser displacement sensors. In this study, the static and dynamic displacement responses due to vehicle loadings were measured by DGPS(differential global positioning system) technique. The displacement response data were compared with data obtained from traditional laser displacement sensors so that the static and dynamic behavior of the bridge under vehicle loadings was examined and the applicability of the displacement response measurement using DGPS technique was verified. The static and dynamic loading test for an self-anchored suspension bridge, So-rok Bridge, was performed using vehicles. The displacement response from DGPS technique and that from laser displacement sensors of the bridge monitoring system were compared. The amplitude of white noise from DGPS based measurement was about 7 mm and that of laser displacement sensor based measurement was about 3 mm. On the other hand, dynamic behavior of the center of main span from DGPS based measurement showed better agreement with influence line of the bridge than that from laser displacement sensors. In addition, there were some irregular and discontinuous variation of data due to the instability of GPS receivers or frequent appearance of GPS satellites. Post-processing via the reference station close to an observation post provided by NGII(National Geographic Information Institute) will be a counter-plan for these defects.

• 열처리공학회지
• /
• 제33권3호
• /
• pp.99-106
• /
• 2020

Selective laser melting (SLM) is an additive manufacturing process by melting metallic powders and stacking into layers, and can product complex shapes or near-net-shape (NNS) that are difficult to product by conventional processes. Also, SLM process is able to raise the efficiency of production by creating a streamlined manufacturing process. For manufacturing in SLM process using Ti-6Al-4V powder, analysis of microstructural evolution and evaluation of mechanical properties are essential because of rapid melting and solidification process of powders according to high laser power and rapid scan speed. In addition, it requires a post-processing because the soundness and mechanical properties are degraded by defects such as pore, un-melted powder, lack-of-fusion, etc. In this study, hot isostatic press (HIP) was conducted as a post-processing on SLM-printed Ti-6Al-4V alloy. Microstructure of post-processed Ti-6Al-4V alloy was compared to as-built Ti-6Al-4V, and the evolution of quasi-static (Vickers hardness, room temperature tensile characteristic) and dynamic (high-cycle fatigue characteristic) mechanical properties were analyzed.