• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.579-582
• /
• 2004

This paper presents controller design of a static var compensator using PWM Cuk AC-AC converter. The PWM Cuk AC-AC converter is modelled by using complex circuit DQ transformation and perturbed around the operating point whereby the small signal system characteristics is analytically obtained. Finally, the PSIM simulations show the validity of the modelling and analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.36-41
• /
• 1988

Analog and Digital Speed Control Systems have mutually complementary properties. Analog System has good dynamic characteristics and moderate steady-state accuracy and can be implemented economically with operational a ampliers. Digital System, on the contray, has good static accuracy, but relatively poor dynamic property. So, a hybrid system which uses both digital and analog control can have good static and dynamic characteristics. In this paper, it is shown that a simple digital controller can improve steady-state accuracy of existing analog control system satisfactorily, and some design criteria are presented also.

• Journal of applied mathematics & informatics
• /
• 제18권1_2호
• /
• pp.1-23
• /
• 2005

The decentralized static output feedback design problem is considered. A constrained trust region method is developed that solves this optimal control problem when a complete set of state variables is not available. The considered problem is interpreted as a non-linear (non-convex) constrained matrix optimization problem. Then, a decentralized constrained trust region method is developed for this problem class exploiting the diagonal structure of the problem and using inexact computations. Finally, numerical results are given for the proposed method.

• 전기학회논문지
• /
• 제57권9호
• /
• pp.1624-1627
• /
• 2008

This paper deals with a linear matrix inequality (LMI) approach to the design of a PID controller for an attraction type magnetic levitation system. First, we convert the $H_ {\infty}$ PID controller problem into a static output feedback problem. We then solve the static output problem by using the recently developed penalty function method. Numerical experiments show the effectiveness of the proposed algorithm.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.373-376
• /
• 2006

There are representative two performance evaluation methods for performance-based design(PBD) of reinforced concrete structures by the nonlinear static analysis, one method includes the capacity spectrum method(CSM) suggested in ATC-40(996) and the other is the displacement coefficient method(DCM) in FEMA-273(1997). The objective of this paper is to compare and verify two methods and suggest the displacement-based design for new performance evaluation of reinforced concrete structures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.799-800
• /
• 2011

• 한국산학기술학회논문지
• /
• 제19권6호
• /
• pp.110-119
• /
• 2018

블록체인 기술은 무결성과 부인 거부 등의 뛰어난 보안성으로 계약 분야(매매 계약, 부동산 계약)에 활용도가 높게 평가되고 있다. 블록체인에서 이러한 계약 서비스는 스마트 컨트랙트라는 기술을 활용하여 개발 가능하며 여러 블록체인 플랫폼들이 스마트 컨트랙트를 개발하기 위한 프로그래밍 언어를 제공한다. 대표적인 블록체인 플랫폼인 비트코인과 이더리움은 비트코인 스크립트와 솔리디티 언어를 제공한다. 이러한 프로그래밍 언어를 이용하여 동적으로 처리될 수 있는 디지털 계약인 스마트 컨트랙트를 개발할 수 있다. 그러나, 다양한 계약 분야에서 스마트 컨트랙트의 개발이 진행되고 있으나 블록체인 기반의 설계를 위한 연구가 미흡한 상황이다. 이에 본 연구에서는 이더리움 기반으로 스마트 컨트랙트를 설계하기 위한 메타모델 및 UML 기반의 정적/동적 설계 기법을 제안한다. 정적설계에서는 스마트 컨트랙트의 속성과 기능을 설계하기 위한 기법을 제안하며, 그리고 컨트랙트들 간의 구조를 설계하기 위한 기법을 제안한다. 동적설계에서는 블록체인 내의 스마트 컨트랙트, 계정, 블록들 간에 배포, 기능 호출, 동기화를 설계하기 위한 기법을 제안한다. 실험은 부동산 계약 사례를 통해 정적/동적 설계 기법을 적용하여 설계 기법의 타당성을 검증한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.391-393
• /
• 2004

For performance and stability of a synchronized system, we need an efficient Clock Tree Synthesis(CTS) methodology to design clock distribution networks. In a system-on-a-chip(SOC) design environment, CTS effectively distributes clock signals from clock sources to synchronized points on layout design. In this paper, we suggest the pre-layout analysis of the clock network including gated clock, multiple clock, and test mode CTS optimization. This analysis can help to avoid design failure with potential CTS problems from logic designers and supply layout constraints so as to get an optimal clock distribution network. Our new design flow including pre-layout CTS analysis and structural violation checking also contributes to reduce design time significantly.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제25회 춘계학술대회
• /
• pp.253-259
• /
• 1997

A software for design of turbine bearings has been developed based on both the theoretical analysis and experimental investigation. Static and dynamic performance, i.e. load capacity, frictional loss, temperature distribution, stiffness and damping coefficients, stability etc., can be obtained by using this software taking into account the effects of three dimensional variation of lubricant viscosity, turbulence and inlet pressure. A performance test rig was developed by self-design and technology, which was used to verify static and dynamic characteristics and to investigate the proper boundary conditions for theoretical analysis. Consequently HANJUNG has developed the self-design technology for design of turbine bearings for power plants.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 봄 학술발표회 논문집
• /
• pp.69-77
• /
• 1999

The stabbing guide is often used to guide an add-on pile into an existing pile in offshore jacket installation. It provides a pile alignment for a welding tie-in in static condition as well. Even stabbing guide is an essential component in pile installation, it is not considered as a permanent offshore structure. In this regard, there is not a define design guideline proposed. In API RP 2A WSD, it briefly define the design considerations of stabbing guide. The failure of stabbing guide can cause a greate economical loss and a serious impact to the project schedule. Stabbing guide design should consider many factors considering actual work conditions for both static and dynamic situations. In the paper, a design method is proposed by appling the plate theory and it is confirmed numerically with FEM modeling. The geometry of stabbing guide is assumed as a cylinder shape with various wall thickness and effective length. The various thickness, effective length and pile size are compared for stable stabbing guide design.